Nylon 6, acrylate rubber blends

Typical Properties of Thermoplastic Elastomers Developed from Nylon-6-Acrylate Rubber Blends... 

Jha A., Dutta B., and Bhowmick A.K., Effect of fillers and plasticizers on the performance of novel heat and oil-resistant thermoplastic elastomers from nylon-6 and acrylate rubber blends, J. Appl. Polym. Sci., 74, 1490, 1999. 

TPEs prepared from rubber-plastic blends usually show poor high-temperature properties. This problem could be solved by using high-melting plastics like polyamides and polyesters. But, often they impart processing problems to the blends. Jha and Bhowmick [49] and Jha et al. [50] have reported the development and properties of novel heat and oil-resistant TPEs from reactive blends of nylon-6 and acrylate rubber (ACM). The properties of various thermoplastic compositions are shown in Table 5.4. In this kind of blend, the plastic phase forms the continuous phase, whereas... 

FIGURE 5.16 Viscosity-shear stress relationships for various compositions of nylon-6-acrylate rubber (ACM) blends at 240°C. 

Jha A. and Bhowmick A.K., Thermoplastic elastomeric blends of nylon 6/acrylate rubber Influence of interaction of mechanical and dynamic mechanical thermal properties. Rubber Chem. TechnoL, 70, 798, 1997. 

Jha, A. and Bhowmick, A.K., Thermal degradation and ageing behaviour of novel thermoplastic elastomeric nylon-6/acrylate rubber reactive blends, Polym. Degrad. Stab., 62, 575, 1998. 

Several flexible polymers, such as natural rubber (NR) synthetic rubber (SR) polyalkyl acrylates copolymers of acrylonitrile, butadiene, and styrene, (ABS) and polyvinyl alkyl ethers, have been used to improve the impact resistance of PS and PVC. PS and copolymers of ethylene and propylene have been used to increase the ductility of polyphenylene oxide (PPO) and nylon 66, respectively. The mechanical properties of several other engineering plastics have been improved by blending them with thermoplastics. 

Numerous nylon blends prepared by compatibilization or reactive blending are commercially successful. The modifiers fiequenfly utilized in commercial nylon blends include polyolefin, thermoplastic polyolefin, thermoplastic polyunethane, ionomer, elastomer, ethylene-propylene rubber, nitrile mbber, polyftetrafluoroethylene), poly (phenylene ether), poly(ether amide), silicone, glass fiber, and carbon fiber. The nonpolar modifiers such as polyolefin, maleic anhydride or a polar vinyl monomer such as acrylic acid, methaciylic acid and fimiaric acid is fiequently incorporated to introduce reactive sites in nylon. 

Some specific recent applications of the GC-MS technique to various types of polymers include the following PE [49,50], poly(l-octene) [51], poly(l-decene) [51], poly(l-dodecene) [51], 1-octene-l-decene-l-dodecene terpolymer [51], chlorinated polyethylene [52], polyolefins [53, 54], acrylic acid methacrylic acid copolymers [55], polyacrylates [56], styrene-butadiene and other rubbers [57-59], nitrile rubber [60], natural rubbers [61, 62], chlorinated natural rubber [63, 64], polychloroprene [65], PVC [66-68], silicones [69, 70], polycarbonates [71], styrene-isoprene copolymers [72], substituted PS [73], polypropylene carbonate [74], ethylene-vinyl acetate copolymers [75], Nylon [76], polyisopropenyl cyclohexane a-methyl styrene copolymers [77], m-cresol-novolac epoxy resins [78], polymeric flame retardants [79], poly(4-N-alkyl styrenes) [80], polyvinyl pyrrolidone [81], vinyl pyrrolidone-methyl acryloxysilicone copolymers [82], polybutylcyanoacrylate [83], polysulfide copolymers [84], poly(diethyl-2-methacryloxy)ethyl phosphate [85], ethane-carbon monoxide copolymers [86], polyetherimide [87], bisphenol A [88], ethyl styrene [89], styrene-isoprene block copolymer [89], polyvinyl alcohol-co-vinyl acetate [90], epoxide thiol [91], maleic acid-propylene copolymer [92], P-hydroxy butyrate-P-hydroxy valerate copolymer [93], polycaprolactams [39,94], PS [95,96], polypyrrole [95,96], polyhydroxy alkanoates [97], poly(p-chloromethyl) styrene [81], polybenzooxazines and siloxy substituted polyoxadisila-pentanylenes [98,99] poly benzyl methacrylates [100], polyolefin blends after ageing in soil [101] and polystyrene peroxide [43]. 

---