Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Number General

Functional Group The number generally gets placed directly in front of the suffix (for example, hexan-2-ol). If the functional group appears at the number 1, then the number does not need to be placed in the name (for example, hexanol). It is assumed that the absence of a number means that the functional group is at the number 1 position. When placing a number, it is OK to place the number at the beginning of the parent. For example, 2-hexanol is the same as hexan-2-ol. Both names are acceptable. [Pg.99]

Besides studies and surveys, which are available in limited numbers, general publications on factors that influence consumer decision can be considered as well. Most of the authors agree that customer satisfaction is the key factor for a positive attitude towards a new technology, and this can only be achieved if the services offered by this technology exceed the old ones. However, many agree that customer satisfaction is a very subjective matter and depends on a number of personal factors, such as personality, education and interests, so that universal selling arguments are hard to find. [Pg.266]

However, when the concentration or mobility of ion pairs is significant compared with the individual ions then the measured diffusion coefficients for both constituents approach that of the ion pairs and not the free ions and as a consequence the apparent t+, and hence t, approach 0.5. In fact it is no longer valid to apply the above equation in order to determine transport numbers. Generally, in the presence of mobile ion pairs or more complex mobile ion clusters, diffusion coefficients and t+ measurements... [Pg.156]

The power bank contains an adequate number (generally several tens) of linear solid-state power devices, such as transistors or power Mosfets. Because of the availability of modern power Mosfets that combine high performance with easy control, classical transistors are nowadays no longer used in applications of this type (in our case, we use channel-N and channel-P Mosfets for the positive and negative power supply sections, respectively). [Pg.427]

Some of these tests cover very broadly the general chemical makeup of waxes. Constants such as acid, ester, saponification and iodine numbers can be used to identify, differentiate or classify waxes chemically (Ref 59). Specific tests are used to determine the values of these numbers for waxes. The saponification number generally indicates the total quantity of both esters and free acids in a wax. The acid value is an indication of the quantity of free fatty acids. The ester value is the relative quantity of esters... [Pg.355]

NOTE Because of their large numbers, general books on photography are not included here. References that support some of tire mote specialized areas of photography and imagery, as reported in this entry, are included. [Pg.1294]

There are 18 people in this example. This is a large number. Generally, a system should have between 5 and 20 people. [Pg.158]

The transport (or transference) numbers (/ ) represent the fractions of current carried out by such specific ions in the absence of concentration gradients. In dilute solutions can be estimated by dividing the equivalent ion conductance (Hq ) by A0. When concentration gradients are present, some of the current arises from diffusion and this affects the effective numbers. Generally, the transference numbers are weak functions of concentration and temperature and may be regarded as practically independent of salt concentration (Prentice, 1991 Robinson and Stokes, 2002). [Pg.273]

Third-Generation Catalysts with Alkylmonophosphines High Turnover Numbers, General Animation of Bromides at Room Temperature, and General Animation of Aryl Chlorides at Low Temperatures... [Pg.212]

Mercury is an example of lower coordination numbers, generally found with post-transition metals. Hg2+ compounds have low ionic character, and two coordination is quite common. [Pg.132]

When material first arrives at NCRPRIS in Ames, it is given an Ames number, which acts as an initial accession number. At some point, the accession is converted to a Plant Introduction (PI) number, generally when relevant plant passport data are deemed adequate (Laura Marek, personal communication). Therefore, NCRPIS material has either an Ames or a PI number, but not both, in addition to an accession name. The wild and weedy accessions generally have TUB- accession names, although some accessions still have their Ames numbers for accession names (Table 8.4). [Pg.172]

Unlike nonviable aerosols, viable aerosol concentrations cannot simply be reported in terms of particles per unit volume since interest here is in the number of living particles per unit volume, and the numbers generally are quite small compared to typical aerosol concentrations. [Pg.173]

This can be seen as a Schmidt number generalized for multicomponent systems. Like the usual Schmidt number, its value will be close to one for gases and Sc does not depend on the gas composition or pressure. Substitution of Equation A.114 in A.113 gives... [Pg.253]

A very wide range of coordination numbers (generally 6-12, but numbers of 2, 3 or 4 are known). [Pg.2]

Liquid metals constitute a class of heat-transfer media having Prandtl numbers generally below 0.01. Heat-transfer coefficients for liquid metals cannot be predicted by the usual design equations applicable to gases, water, and more viscous fluids with Prandtl numbers greater than 0.6. Relationships for predicting heat-transfer coefficients for liquid metals have been derived from solution of Eqs. (5-38a) and (5-38b). By the momentum-transfer-heat-transfer analogy, the eddy conductivity of heat is = k for small IVp,. Thus in the solu-... [Pg.391]

If oxidation number and coordination number increase simultaneously, the expected frequency shifts cannot be predicted with confidence, since both properties lead to opposing frequency changes. The influence of the increased oxidation number generally dominates ... [Pg.232]

Heat transfer at a wall is related to the Reynolds number, generally to the power 0.7. Thus, there is great interest in secnring a low viscosity when the heat of pyrolysis is to be supplied. Dissolving the feed in oil is a possible procedure. [Pg.23]


See other pages where Number General is mentioned: [Pg.237]    [Pg.565]    [Pg.671]    [Pg.278]    [Pg.63]    [Pg.15]    [Pg.239]    [Pg.198]    [Pg.278]    [Pg.549]    [Pg.131]    [Pg.195]    [Pg.90]    [Pg.226]    [Pg.237]    [Pg.644]    [Pg.534]    [Pg.1584]    [Pg.382]    [Pg.100]    [Pg.160]    [Pg.125]    [Pg.45]    [Pg.64]    [Pg.192]    [Pg.694]    [Pg.18]    [Pg.348]    [Pg.46]    [Pg.373]    [Pg.1249]    [Pg.496]   


SEARCH



© 2024 chempedia.info