Nitro results

It is convenient to include under Aromatic Amines the preparation of m-nitroaniline as an example of the selective reduction of one group in a polynitro compound. When wt-dinitrobenzene is allowed to react with sodium polysulphide (or ammonium sulphide) solution, only one of the nitro groups is reduced and m-nitroanUine results. Some sulphur separates, but the main reaction is represented by ... 

There are complications in applying the Hinsberg test to certain amines containing hydroxyl, nitro and carboxyl groups, e.g., p-N-methylamiiiobenzoic acid CHjNHC.HjCOOH (I 4) may behave in this test as a primary amine (soluble in alkali) so that it is essential to consider the properties of the original compound in conjunction with the results of the test. 

Reduction of a nitro compound to a primary amine. In a 50 ml. round-bottomed or conical flask fitted with a reflux condenser, place 1 g. of the nitro compound and 2 g. of granulated tin. Measure out 10 ml. of concentrated hydrochloric acid and add it in three equal portions to the mixtiue shake thoroughly after each addition. When the vigorous reaction subsides, heat under reflux on a water bath until the nitro compound has completely reacted (20-30 minutes). Shake the reaction mixture from time to time if the nitro compound appears to be very insoluble, add 5 ml. of alcohol. Cool the reaction mixture, and add 20-40 per cent, sodium hydroxide solution imtil the precipitate of tin hydroxide dissolves. Extract the resulting amine from the cooled solution with ether, and remove the ether by distillation. Examine the residue with regard to its solubility in 5 per cent, hydrochloric acid and its reaction with acetyl chloride or benzene-sulphonyl chloride. 

Certain features of the addition of acetyl nitrate to olefins in acetic anhydride may be relevant to the mechanism of aromatic nitration by this reagent. The rapid reaction results in predominantly cw-addition to yield a mixture of the y -nitro-acetate and y5-nitro-nitrate. The reaction was facilitated by the addition of sulphuric acid, in which case the 3rield of / -nitro-nitrate was reduced, whereas the addition of sodium nitrate favoured the formation of this compound over that of the acetate. As already mentioned ( 5.3. i), a solution of nitric acid (c. i 6 mol 1 ) in acetic anhydride prepared at — 10 °C would yield 95-97 % of the nitric acid by precipitation with urea, whereas from a similar solution prepared at 20-25 °C and cooled rapidly to —10 °C only 30% of the acid could be recovered. The difference between these values was attributed to the formation of acetyl nitrate. A solution prepared at room... 

The argtiments of Norman and his co-workers seem to give affirmative answers to the first and second of these questions, but it is doubtful if the available data further require such an answer for the third question. It can be argued that the crucial comparison made between the behaviour of benzyltrimethylammonium ion and protonated benzyl methyl ether is invalid, and that it is possible to interpret the results in terms of nitration by the nitronium ion, modified by protonation of the oxygen atom of the ether a case for the possible involvement of the nitro-nium ion in specific interaction leading to o-substitution has been made. ... 

That some modification to the position so far described might be necessary was indicated by some experiments of Nesmeyanov and his co-workers. Amongst other compounds they nitrated phenyl trimethyl ammonium and triphenyloxonium tetrafluoroborates with mixed acid the former gave 96 % of m- and 4 % of -nitro compound (88 % total yield), whilst the latter gave 80% of the tri-(p-nitrophenyl)oxonium salt. Ridd and his co-workers have made a quantitative study of the phenyl trimethyl ammonium ion. Their results, and those of other recent workers on the nitration of several cations, are collected in table 9.3. 

A similar study of the nitration of 2,5-dichloro- and 2,5-dibromo-nitrobenxene under a variety of conditions has been made. At the very high acidities in oleum the o /)-ratio for nitration was less than unity. It increased with decreasing acidity of the medium and became greater than unity at roughly the acidity represented by 89-90 % sulphuric acid. The results were interpreted in terms of the interaction between the nitronium ion and the nitro group, but the results are complicated and the interpretation not compelling. 

The case of i-methyl-4-quinolone is puzzling. The large proportion of the 3-nitro isomer formed in the nitration (table 10.3 cf. 4-hydroxyquinoline) might be a result of nitration via the free base but this is not substantiated by the acidity dependence of the rate of nitration or by the Arrhenius parameters. From r-methyl-4-quinolone the total yield of nitro-compounds was not high (table ro.3). 

Davies and Warren have investigated the nitration of naphthalene, ace-naphthene and eight dimethylnaphthalenes in acetic anhydride at o °C. Rates relative to naphthalene were determined by the competition method, and the nitro-isomers formed were separated by chromatographic and identified by spectrophotometric means. The results, which are summarised in the table, were discussed in terms of various steric effects, and the applicability of the additivity rule was examined. For the latter purpose use was made of the data of Alcorn and Wells (table 10.2) relating to the nitration of monomethyl-naphthalenes at 25 °C. The additivity rule was found to have only limited utility, and it was suggested that the discrepancies might be due in part to the... 

Efforts directed to prepare MDP2P via this method results in good yields of a ketone with properties completely dissimilar to MDP2P, and is probably the propiophenone, formed by migration of the nitro group during the hydrolysis. 

A solution of trifluoroacetic acid in toluene was found to be advantageous for cydization of pyruvate hydrazoncs having nitro substituents[4]. p-Toluene-sulfonic acid or Amberlyst-15 in toluene has also been found to give excellent results in preparation of indole-2-carboxylale esters from pyruvate hydra-zoiies[5,6J. Acidic zeolite catalysts have been used with xylene as a solvent to convert phenylhydraziiies and ketones to indoles both in one-flask procedures and in a flow-through reactor[7]. 

The overall reactivity of the 4- and 5-positions compared to benzene has been determined by competitive methods, and the results agreed with kinetic constants established by nitration of the same thiazoles in sulfuric acid at very low concentrations (242). In fact, nitration of alkylthiazoles in a mixture of nitric and sulfuric acid at 100°C for 4 hr gives nitro compounds in preparative yield, though some alkylthiazoles are oxidized. Results of competitive nitrations are summarized in Table III-43 (241, 243). For 2-alkylthiazoles, reactivities were too low to be measured accurately. 

---