Nickel carbonyl, carboxylation reactions

Reactions of diazo compounds with nickel carbonyl Carboxylic acids from diazo compounds... 

Garboxylation Reaction. The carboxylation reaction represents the conversion of acetylene and olefins into carboxyHc acids (qv) or their derivatives. The industrially important Reppe process is used in the synthesis of P-unsaturated esters from acetylene. Nickel carbonyl is the catalyst of choice (134). 

Nickel carbonyl is the more widely known catalyst for the carboxylation reaction dicobalt octacarbonyl has the disadvantage of giving side reactions (15). Dicobalt octacarbonyl has been used in the presence of tributyl phosphine for the reaction of ethylene, carbon monoxide, water, and ethanol. Besides ethyl acetate, acetaldehyde and diethyl ketone were found (136). Hydrogen has been found to increase the rate of reaction (78), presumably by the formation of cobalt hydrocarbonyl. However, this can lead to the formation of aldehydes, as in the reaction of acetyl bromide when an 89.4% yield of aldehyde was obtained in spite of the presence of water (95). 

The reaction of aryidiazonium tetrafluoroborates with nickel carbonyl in ethanol or acetic acid gives aryl carboxylic adds in yields of 2-7fi%. ... 

Reaction with diazoalkanes. Catalytic amounts of nickel carbonyl decompose diazoalkanes to products evidently formed from an intermediate carbene. Use of a large excess of reagent in the presence of ethanol leads to formation of carboxylic acid esters in yields of 20-25%. 

Heck, R.F. The Mechanism of the Allyl Halide Carboxylation Reaction Catalyzed by Nickel Carbonyl. J. Am. Chem. Soc. 85, 2013 (1963)... 

There has been a review of palladium-catalysed carbonylative coupling reactions of aryl halides with carbon nucleophiles in the presence of carbon monoxide. It has been shown that rhodium is an efficient catalyst for the homocoupling reaction of arylzinc compounds in the presence of 1 atm of carbon monoxide to give diaryl ketones. Under similar conditions, palladium and nickel catalysts yield biaryls. The beneficial catalysis by rhodium is likely to derive from the ease of migration of the aryl ligand to carbon monoxide in the rhodium(III) intermediate. A rhodium catalyst has also been used in the formation of indole-3-carboxylates by reaction of indoles with alcohols in the presence of carbon monoxide. The catalytic cycle. Scheme 5, is likely to involve metallation of the indole at the 3-position, followed... 

Diazonium salts also readily react with nickel carbonyl, yielding mainly carboxylic acids and ketones in the presence of water and hydrochloric add (26, 27). Iron pentacarbonyl and dicobalt octacarbonyl with diazonium salts behave similarly, but the hexacarbonyls of chromium and molybdenum are virtually ineffective. This reaction may be considered as a transition metal-catalyzed carbonylation of aryl radicals, and is closely related to the Meer-wein reaction (26). 

The zwitterion (6) can react with protic solvents to produce a variety of products. Reaction with water yields a transient hydroperoxy alcohol (10) that can dehydrate to a carboxyUc acid or spHt out H2O2 to form a carbonyl compound (aldehyde or ketone, R2CO). In alcohoHc media, the product is an isolable hydroperoxy ether (11) that can be hydrolyzed or reduced (with (CH O) or (CH2)2S) to a carbonyl compound. Reductive amination of (11) over Raney nickel produces amides and amines (64). Reaction of the zwitterion with a carboxyUc acid to form a hydroperoxy ester (12) is commercially important because it can be oxidized to other acids, RCOOH and R COOH. Reaction of zwitterion with HCN produces a-hydroxy nitriles that can be hydrolyzed to a-hydroxy carboxyUc acids. Carboxylates are obtained with H2O2/OH (65). The zwitterion can be reduced during the course of the reaction by tetracyanoethylene to produce its epoxide (66). 

Palladium complexes also catalyze the carbonylation of halides. Aryl (see 13-13), vinylic, benzylic, and allylic halides (especially iodides) can be converted to carboxylic esters with CO, an alcohol or alkoxide, and a palladium complex. Similar reactivity was reported with vinyl triflates. Use of an amine instead of the alcohol or alkoxide leads to an amide. Reaction with an amine, AJBN, CO, and a tetraalkyltin catalyst also leads to an amide. Similar reaction with an alcohol, under Xe irradiation, leads to the ester. Benzylic and allylic halides were converted to carboxylic acids electrocatalytically, with CO and a cobalt imine complex. Vinylic halides were similarly converted with CO and nickel cyanide, under phase-transfer conditions. ... 

Nickel-catalyzed carbonylation of a-ketoalkynes has also been reported by Arzoumanian et al. under phase-transfer conditions.94 The carbonylation gave either furanone or unsaturated carboxylic acids depending on the substituents of substrates (Eq. 4.53). A similar reaction, nickel-catalyzed cyanation of a-ketoalkynes with KCN in water, was also reported to afford unsaturated hydroxylactams (Eq. 4.54).95... 

The methyl ester has also been obtained by esterification of cyclopentanecarboxylic acid.8 The acid, in turn, has been prepared by the Favorskii rearrangement,6 7 9-11 by the reaction of cyclopentyl Grignard reagent with carbon dioxide,12 by the carbonylation of cyclopentyl alcohol with nickel carbonyl13 or with formic acid in the presence of sulfuric acid,14 and by the hydrogenation of cyclopentene-1-carboxylic acid prepared from ethyl cyclopentanone-2-carboxylate 15 or from cyclopentanone cyanohydrin.16... 

The carbonylation of alcohols can proceed with formation of carboxylic acid by catalytic insertion of CO into the carbon-oxygen bond. An alternative reaction gives rise to oxalate or formate esters, when the CO is inserted into the oxygen-hydrogen bond. The members of the nickel triad carbonylate alcohols to give each of these products, and they will be discussed separately. 

The reaction of an aUcene (or aUcyne), CO, and H2O to directly produce a carboxylic acid is called Reppe carbony-lation chemistry or, more recently, hydrocarboxylation (see Reppe Reaction). An excellent review of palladium-catalyzed Reppe carbonylation systems has been published recently by Kiss, and coverage of this important material will not be repeated here. This catalytic reaction has been known for quite some time, although the stoichiometric Ni(CO)4-based carbonylation of acetylene was the first commercial carbonylation process implemented (equation 13). The extreme toxicity of Ni(CO)4, however, has limited practical applications (see Nickel Organometallic Chemistry). Co, Rh, and Pd catalysts have certainly replaced Ni(CO)4 in smaller-scale laboratory reactions, though for historical reasons a number of the fim-damental mechanisms discussed in this section are based on Ni(CO)4. 

Arenediazonium salts react stoichiometrically with nickel and iron carbonyls to give aromatic carboxylic acids in moderate yield, but a more reliable procedure involves direct, catalytic carbonylation in the presence of palladium acetate. The reaction proceeds at room temperature under CO pressure (9 bar)... 

The hydroxycarbonylations (carboxylations) of alkyl, aryl, benzyl and allyl halides are from a retrosynthetic and mechanistic standpoint closely related. This type of reaction is widely used in organic synthesis [6], although a stoichiometric amount of salt by-product makes these methods less attractive on a large scale. The use of water-soluble catalysts for carbonylation of organic halides was scarcely studied in the past. Up to now palladium, cobalt, and nickel compounds in combination with water-soluble ligands have been used as catalysts for various carboxylations. 

Other metal catalysts which have been utilized for biphasic carbonylation of ben-zylic halides to carboxylic acids under phase-transfer conditions, besides cobalt carbonyl [11], include palladium(O) complexes [12] and water-soluble nickel cyanide complexes [13], Although not investigated in detail, it must be assumed that catalysis takes place in all these reactions in the organic phase. 

The stereochemistry of the metallo-ene cyclization step plays a crucial role in the accessibility of subsequent reaction steps. Thus, only the civ-isomer of the cyclization product can undergo further carbonylative cyclization to form the bicyclic products, while the fram-isorner can Only undergo linear carboxylation 65. Product distribution also depends on the catalyst used. Thus, for selective carbonylative bicyclizations, nickel catalysis, especially Ni(cod)2/1,4-bis(diphenylphos-phino)butane, are more effective than palladium systems, such as Pd(dba)2/triphenylphosphane55. 

---