Network copolymers, synthesis

This multitude of properties the polymer must possess dictate that better polymer performance will be obtained from materials with complicated structures. Such polymers are complex polymers l) random copolymers, 2) block copolymers, 3) graft copolymers, 4) micellizing copolymers, and 5) network copolymers. There has been a dramatic increase in the past decade in the number and complexity of these copolymers and a sizable number of these new products have been made from natural products. The synthesis, analysis, and testing of lignin and starch, natural product copolymers, with particular emphasis on graft copolymers designed for enhanced oil recovery, will be presented. 

Demoustier-Champagne, S. Devaux, J. Polysilanes and copolymers synthesis and characterization. In Recent Research Developments in Polymer Science-, Pandalai, S. G., Ed. Transworld Research Network Trivandrum, 1998 Vol. 2, pp 1—27. 

Curteanu, S. Cazacu, M., Neural Networks and Genetic Algorithms Used for Modeling and Optimization of the Siloxane-Siloxane Copolymers Synthesis. 

See also PBT degradation structure and properties of, 44-46 synthesis of, 106, 191 Polycaprolactam (PCA), 530, 541 Poly(e-caprolactone) (CAPA, PCL), 28, 42, 86. See also PCL degradation OH-terminated, 98-99 Polycaprolactones, 213 Poly(carbo[dimethyl]silane)s, 450, 451 Polycarbonate glycols, 207 Polycarbonate-polysulfone block copolymer, 360 Polycarbonates, 213 chemical structure of, 5 Polycarbosilanes, 450-456 Poly(chlorocarbosilanes), 454 Polycondensations, 57, 100 Poly(l,4-cyclohexylenedimethylene terephthalate) (PCT), 25 Polydimethyl siloxanes, 4 Poly(dioxanone) (PDO), 27 Poly (4,4 -dipheny lpheny lpho sphine oxide) (PAPO), 347 Polydispersity, 57 Polydispersity index, 444 Poly(D-lactic acid) (PDLA), 41 Poly(DL-lactic acid) (PDLLA), 42 Polyester amides, 18 Polyester-based networks, 58-60 Polyester carbonates, 18 Polyester-ether block copolymers, 20 Polyester-ethers, 26... 

In this section of our review, recent developments in the synthesis of organosiloxane containing multiphase copolymers and networks will be discussed. Basic structural and physical characteristics of the copolymers (e.g. spectroscopic, thermal, molecular weight, etc.), supporting the formation of the multiphase structures will be given. Mechanical and morphological characteristics of representative systems will be discussed in Chapt. 4. 

Finkelmann et al. 256 274,2781 have also investigated the synthesis and the characteristics of siloxane based, crosslinked, liquid crystalline polymers. This new type of materials displays both liquid crystallinity and rubber elasticity. The synthesis of these networks is achieved by the hydrosilation of dimethylsiloxane-(hydrogen, methyl)siloxane copolymers and vinyl terminated mesogenic molecules in the presence of low molecular weight a,co-vinyl terminated dimethylsiloxane crosslinking agents156 ... 

Synthesis of comb (regular graft) copolymers having a PDMS backbone and polyethylene oxide) teeth was reported 344). These copolymers were obtained by the reaction of poly(hydrogen,methyl)siloxane and monohydroxy-terminated polyethylene oxide) in benzene or toluene solution using triethylamine as catalyst. All the polymers obtained were reported to be liquids at room temperature. The copolymers were then thermally crosslinked at 150 °C. Conductivities of the lithium salts of the copolymers and the networks were determined. 

Bifunctional initiators are sometimes needed e.g., for the synthesis of triblock copolymers, networks, or a,co-difunctional macromolecules. Whenever it is possible to carry out the polymerization in a polar solvent no major difficulty is involved, as bifunctional initiators covering a wide range of nucleophilicities are available (Table 2). 

The purpose of this review is to show how anionic polymerization techniques have successfully contributed to the synthesis of a great variety of tailor-made polymer species Homopolymers of controlled molecular weight, co-functional polymers including macromonomers, cyclic macromolecules, star-shaped polymers and model networks, block copolymers and graft copolymers. 

For equilibration processes, one must synthesize both oligomers and what are termed dimers, or disiloxanes. Our primary interest is in the utilization of these functional oligomers for the synthesis of both linear block or segmented copolymers, and also surface modified, oughened networks such as the epoxy and imide systems (3-27). The generalized structure of the oligomers of interest is shown in Scheme 1. 

Mazurek, M. Silicone Copolymer Networks and Interpenetrating Networks. In Silicon-Containing Polymers. The Science and Technology of Their Synthesis and Applications-, Jones, R. G., Ando, W., Chojnowski, J., Eds. Kluwer Dordrecht, 2000 pp 113-137. 

Some of these oligomers have later been used in the synthesis of various segmented urea or imide type copolymers and in the modification of epoxy networks, which have been discussed elsewhere (5,11). ... 

Another approach was attempted by Seppala and Kylma who reported the synthesis of poly(ester-urethane)s by condensation of hydroxyl terminated tel-echelic poly(CL-co-LA) oligomers with 1,6-hexamethylene diisocyanate (Scheme 33) [94]. The diisocyanate acts as chain extender producing an increase in molecular weight of the preformed oligomers. The authors claim that some of the copolymers present elastomeric properties. Using a similar method. Storey described the synthesis of polyurethane networks based on D,L-LA, GA, eCL,... 

Chapter 4 shows that the range of polymeric structures from enzymatic polymerization can be further increased by combination with chemical methods. The developments in chemoenzymatic strategies towards polymeric materials in the synthesis of polymer architectures such as block and graft copolymers and polymer networks are highlighted. Moreover, the combination of chemical and enzymatic catalysis for the synthesis of unique chiral polymers is discussed. 

---