Naphthalene, aromaticity reaction with

The reaction of dichlorocarbene with aromatic compounds, with a few exceptions, lacks preparative value the adducts rearrange undergoing addition of another molecule of carbene and the final yield of complex product mixture rarely exceeds more than a few percent. Of synthetic importance are the reactions with indenes, phenanthrene (its 9-substituted derivatives 9-ethoxy-,9-trimethylsilyl-, " 9-arylthio-, 9-arylseleno- ), pyrene and various alkyl-naphthalenes. 120 Reactions with aromatic compounds are discussed in Houben-Weyl, Vol. E19b, pp 1551-1553. 

Reactions other than those of the nucleophilic reactivity of alkyl sulfates iavolve reactions with hydrocarbons, thermal degradation, sulfonation, halogenation of the alkyl groups, and reduction of the sulfate groups. Aromatic hydrocarbons, eg, benzene and naphthalene, react with alkyl sulfates when cataly2ed by aluminum chloride to give Fhedel-Crafts-type alkylation product mixtures (59). Isobutane is readily alkylated by a dipropyl sulfate mixture from the reaction of propylene ia propane with sulfuric acid (60). 

The y-nitrogen atom of a sulfonic acid azide is electrophilic and reacts in an electrophilic aromatic substitution with an activated benzene or naphthalene derivative, e.g., a phenoxide ion, forming a l-tosyl-3-aryltriazene (2.47). The 1,4-quinone diazide is obtained by hydrolysis (Scheme 2-30, Tedder and Webster, 1960). The general applicability of this reaction seems to be doubtful. With 1-naphthol the 1,2-naphthoquinone diazide was obtained, not the 1,4-isomer. 

The reaction has been applied to nonheterocyclic aromatic compounds Benzene, naphthalene, and phenanthrene have been alkylated with alkyllithium reagents, though the usual reaction with these reagents is 12-20, and Grignard reagents have been used to alkylate naphthalene. The addition-elimination mechanism apparently applies in these cases too. A protected form of benzaldehyde (protected as the benzyl imine) has been similarly alkylated at the ortho position with butyl-lithium. ... 

The transformation of arenes in the troposphere has been discussed in detail (Arey 1998). Their destruction can be mediated by reaction with hydroxyl radicals, and from naphthalene a wide range of compounds is produced, including 1- and 2-naphthols, 2-formylcinnamaldehyde, phthalic anhydride, and with less certainty 1,4-naphthoquinone and 2,3-epoxynaphthoquinone. Both 1- and 2-nitronaphthalene were formed through the intervention of NO2 (Bunce et al. 1997). Attention has also been directed to the composition of secondary organic aerosols from the photooxidation of monocyclic aromatic hydrocarbons in the presence of NO (Eorstner et al. 1997) the main products from a range of alkylated aromatics were 2,5-furandione and the 3-methyl and 3-ethyl congeners. 

For some halides, it is advantageous to use finely powdered lithium and a catalytic amount of an aromatic hydrocarbon, usually naphthalene or 4,4 -di- -bu(ylbiphcnyl (DTBB).28 These reaction conditions involve either radical anions or dianions generated by reduction of the aromatic ring (see Section 5.6.1.2), which then convert the halide to a radical anion. Several useful functionalized lithium reagents have been prepared by this method. In the third example below, the reagent is trapped in situ by reaction with benzaldehyde. 

This silylene formation from 27 under mild conditions permits the synthesis of a variety of interesting carbo- and heterocycles, most of which are new types of compounds. The results are summarized in Schemes 5 and 6. The reactions with benzene and naphthalene represent the first examples of [2+1] cycloadditions of a silylene with aromatic C=C double bonds.59 623 The reactions with carbon disulfide and isocyanide (Scheme 6) are also of great interest because of their unusual reaction patterns.62b... 

Even simple dienes and polyenes are difficult to classify in comparison with alkenes. Whereas bromination, oxidation and reaction with tetranitromethane (TNM) can identify the number of double bonds and their location in the molecular structure, conjugated double bonds produce very complex mixtures. Furthermore, many of the tests based on 7r-complexation can also apply for aromatic moieties. An example is the TNM 7r-complex which is yellow with benzene and orange with naphthalene and the tests are therefore non-specific. 

The reaction with the siloxy derivative 29 is an interesting example because the product 30 is a 1,5-dicarbonyl derivative (Equation (36)).96 1,5-Dicarbonyls are classically prepared by a Michael addition, but the synthesis of 30 by a Michael addition is not possible because it would require addition to the keto form of 1-naphthol. The acetoxy derivative 31 resulted in a different outcome, leading to the direct synthesis of the naphthalene derivative 32 (Equation (37)).96 In this case, the combined C-H activation/Cope rearrangement intermediate was aromatized by elimination of acetic acid before undergoing a reverse Cope rearrangement. 

Soma et al. (12) have generalized the trends for aromatic compound polymerization as follows (1) aromatic compounds with ionization potentials lower than approximately 9.7 eV formg radical cations upon adsorption in the interlayer of transition-metal ion-exchanged montmorillonites, (2) parasubstituted benzenes and biphenyls are sorbed as the radical cations and prevented from coupling reactions due to blockage of the para position, (3) monosubstituted benzenes react to 4,4 -substituted biphenyls which are stably sorbed, (4) benzene, biphenyl, and p-terphenyl polymerized, and (5) biphenyl methane, naphthalene, and anthracene are nonreactive due to hindered access to reaction sites. However, they observed a number of exceptions that did not fit this scheme and these were not explained. 

Addition of carbenes to Jt-electron excessive aromatic compounds, or those which possess a high degree of bond fixation, is well established. Dihalocarbenes react with naphthalenes with ring expansion to produce benztropylium systems (Scheme 7.8). Loss of hydrogen halide from the initially formed product leads to an alkene which reacts with a second equivalent of the carbene to yield the spirocyclopropyl derivatives in high yield (>95%) [14, 50]. Insertion into the alkyl side chain (see Section 7.2) also occurs, but to a lesser extent [14]. Not unexpectedly, dichlorocarbene adds to phenanthrenes across the 9,10-bond [9, 10, 14], but it is remarkable that the three possible isomeric spiro compounds could be isolated (in an overall yield of 0.05% ) from the corresponding reaction with toluene [14]. 

Chemical/Physical. Under atmospheric conditions, the gas-phase reaction with OH radicals and nitrogen oxides resulted in the formation of p-tolualdehyde (Atkinson, 1990). Kanno et al. (1982) studied the aqueous reaction of p-xylene and other aromatic hydrocarbons (benzene, toluene, o-and /n-xylene, and naphthalene) with hypochlorous acid in the presence of ammonium ion. They reported that the aromatic ring was not chlorinated as expected but was cleaved by chloramine forming cyanogen chloride. The amount of cyanogen chloride formed increased at lower pHs (Kanno et al, 1982). Products identified from the OH radical-initiated reaction of p-xylene in the presence of nitrogen dioxide were 3-hexene-2,5-dione, p-tolualdehyde, and 2,5-dimethylphenol (Bethel et al., 2000). 

Aromatic compounds can participate in both [2+2] and [4+2] photocycloaddition reactions with uracil derivatives to give either benzocyclobutane or ethenoquinazoline (barrelene) derivatives, which can then undergo a number of subsequent photochemical reactions. The products obtained are dependent upon the reaction conditions, and thus the photocycloaddition reaction between naphthalenes 470 and l,3-dimethyl-5-fluorouracil 471 in cyclohexane gave 4a-fluoro-5,10-ethenobenzo[/]quinazolines 472 as products as a result of a [4+2] photocycloaddition (photo-Diels-Alder) reaction <2002TL3113, 2003H(61)377>. 

Diamino-2,l>3-benzothiadiazole 201 undergoes cyclization on reaction with selected aromatic aldehydes <2004T2953>. Thus, reactions with pyrene-l-carboxaldehyde or naphthalene-1-carboxaldehyde in refluxing toluene produce the corresponding imidazoles 202 in moderate yields, whereas reactions with /i-(Ar,Ar-dimethylamino)benz-aldehyde and /i-[Ar,Ar-di(4-methylphenyl)amino]benzaldehyde under similar conditions gave the corresponding 5-imino derivatives 203 (Scheme 13). 

Radical ion pairs also react by proton, atom, or group transfer. We illustrate proton transfer in reactions of aromatic hydrocarbons with tertiary amines. These reactions cause reduction or reductive coupling. In the reduction of naphthalene, the initial ET is followed by H" transfer from cation to anion, forming 67 paired with an aminoalkyl radical the pair combines to generate... 

---