Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Nanorod, polyaniline

More recently, RT EPR signals attributable to polarons (narrow symmetric singlet, g= 2.0030) have been reported for blends of LLDPE with 5-20 wt% nanorod-polyaniline (NR-PANI, synthesized via a falling pH route), prepared by melt extrusion [97]. It should be mentioned here that these blends are good candidates for application as antioxidant packaging materials, as their capability for free radical scavenging increases with NR-PANI content in an over-linear fashion. [Pg.761]

PP-g-MA) silicate nanocomposites and intercalated thermoset silicate nanocomposites for flame-retardant applications were characterised by XRD and TEM [333], XRD, TEM and FTIR were also used in the study of ID CdS nanoparticle-poly(vinyl acetate) nanorod composites prepared by hydrothermal polymerisation and simultaneous sulfidation [334], The CdS nanoparticles were well dispersed in the polymer nanorods. The intercalation of polyaniline (PANI)-DDBSA (dodecylbenzene-sulfonate) into the galleries of organo-montmorillonite (MMT) was confirmed by XRD, and significantly large 4-spacing expansions (13.3-29.6A) were observed for the nanocomposites [335],... [Pg.647]

Xia H, Cheng D, Xiao C, Chan HS (2006). Controlled synthesis of Y-junction polyaniline nanorods and nanotubes using in situ self-assembly of magnetic nanoparticles. J. Nanosci. Nanotechnol. 6 3950-3954. [Pg.222]

D. Chaudhuri, S. Datar, R. Viswanatha, D. D. Sarma, and H. Amenitsch, Self-organization of polyaniline nanorods Towards achieving a higher conductivity, Appl. Phys. Lett, 87, 093117... [Pg.76]

C. Su, G. Wang, and F. Huang, Preparation and characterization of composites of polyanihne nanorods and multiwalled carbon nanotubes coated with polyaniline, J. Appl. Polym. Sci., 106, 4241 247 (2007). [Pg.77]

M.-C. Park, Q. Sun, and Y. Deng, Polyaniline microspheres consisting of highly crystallized nanorods, Macromol. Rapid Commun., 28,1237-1242 (2007). [Pg.81]

S. Ding, H. Mao, and W. Zhang, Fabrication of DBSA-doped polyaniline nanorods by interfacial polymerization, J. Appl. Polyrrt Sci., 109, 2842-2847 (2008). [Pg.81]

J. Jang, J. Bae, and K. Lee, Synthesis and characterization of polyaniline nanorods as curing agent and nanofiUer for epoxy matrix composite. Polymer, 46, 3677-3684 (2005). [Pg.83]

J. Jang and J. Bae, Formation of polyaniline nanorod/hquid crystalline epoxy composite nanowires using a temperature-gradient method, Adv. Funct. Mater., 15,1877-1882 (2005). [Pg.83]

B. K. Kuila, B. Nandan, M. Bohme, A. Janke, and M. Stamm, Vertically oriented arrays of polyaniline nanorods and their super electrochemical properties, Chem. Commun., 38, 5749-5751 (2009). [Pg.85]

C. Laslau, Z. D. Zujovic, and J. Travas-Sejdic, Polyaniline nanoUibe self-assembly The stage of granular agglomeration on nanorod templates, Macromol. Rapid Commun., 30,1663-1668 (2009). [Pg.91]

B. Sreedhar, P. Radhika, B. Neelima, N. HehaUcar, and M. V. B. Rao, Synthesis and characterization of polyaniline nanospheres, nanorods, and nanotubes-catalytic application for sulfoxidation reactions, Polym. Adv. Technol, 20, 950-958 (2008). [Pg.93]

Cai, G., Tu, J., Zhou, D., Zhang, J., Xiong, Q., Zhao, X., Wang, X., Gu, C., 2013. Multicolor electrochromic film based on ri02 polyaniline core/shell nanorod array. J. Phys. Chem. C 117,15967-15975. [Pg.142]

Poorahong, S., Thammakhet, C., Thavarungkul, R, Limbut, W., Numnuam, A, and Kanatharana, P. (2012]. Amperometric sensor for detection of bisphenol A using a pencil graphite electrode modified with polyaniline nanorods and multiwalled carbon nanotubes, Microchim. Acta, 176, pp. 91-99. [Pg.464]

Conventional polyaniline has been previously used as a chemical sensor but has been limited in its sensitivity and time response. Previous work on enhancing the detection capabilities of polyaniline has included the use of thinner films (6). The disadvantages of this method are the loss of robustness of the film and the difficulty in making such thin films with good control. Another way to increase sensitivity to gases is to change the morphology of the polyaniline. In particular, nanostructured forms of polyaniline, such as nanowires, nanofibers, or nanorods, have recently received much attention because their small diameters are expected to allow for fast diffusion of gas molecules into the structures (7). [Pg.102]

Thin nanoporous films fabricated using SMA of PS- -P4VP and HABA have also been used for electrochemical deposition of materials. High-density arrays of ordered and aligned polyaniline nanorods with 10-nm diameter have... [Pg.2898]

Polyaniline (PANI) represents one of the most cited examples of nanostructured polymers, due to its outstanding electronic properties and technological applications that have promoted a wide number of studies and publications. Although a variety of different and peculiar morphologies have been reported, such as brain like [92], cauliflowers [93], nanoflakes, nanospheres and nanorods [94], chrysan-fhemum flower-like [95], plate-like structures and flower-like superstructures [96],... [Pg.13]

Ma B, Zhou X, Bao H, Li X, Wang G (2012) Hierarchical composites of sulfonated graphene-supported vertically aligned polyaniline nanorods for high-performance supercapacitors. J Power Sources 215 364-2... [Pg.190]


See other pages where Nanorod, polyaniline is mentioned: [Pg.372]    [Pg.372]    [Pg.570]    [Pg.216]    [Pg.84]    [Pg.122]    [Pg.122]    [Pg.140]    [Pg.144]    [Pg.149]    [Pg.510]    [Pg.611]    [Pg.798]    [Pg.212]    [Pg.215]    [Pg.220]    [Pg.2899]    [Pg.14]    [Pg.641]    [Pg.175]   
See also in sourсe #XX -- [ Pg.221 ]




SEARCH



Nanorod

Nanorods

Polyaniline nanorods

Polyaniline nanorods

© 2024 chempedia.info