Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Multiphoton ionization detection

Lemire, G. W., J. B. Simeonsson, and R. C. Sausa, Monitoring of Vapor-Phase Nitro Compounds Using 226-nm Radiation Fragmentation with Subsequent No Resonance-Enhanced Multiphoton Ionization Detection, Anal. Chem., 65, 529-533 (1993). [Pg.647]

A study has been described of the real-time multiphoton ionization detection of iodine atoms produced by i.r. multiphoton dissociation of perfluoroalkyl iodides,and the relative importance of different possible fragmentation pathways in multiphoton ionization fragmentation of some alkyl iodides has been determined by a maximum entropy formalism. ... [Pg.210]

Using 2-photon excitation and 1+1 resonance-enhanced multiphoton ionization detection, Sha and co-workers (Sha, et al., 1995, Chen, et al., 1996) have measured cross-sections for CO A1n(u == 0) —> e3E (v = 1) transitions. The transition rates were found to be enhanced at spectroscopic perturbations between these vibronic levels and, moreover, displayed interference effects similar to those displayed in calculations on CaO collisions, described below. [Pg.449]

Detection limit is 1 to 20 pg (0.3 ppm for hydrogen). A fiber optic multiphoton ionization detection is able to detect 0.12 ng PAH. [Pg.186]

Nosenko Y, Kunitski M, Riehn C, Harbach PHP, Dreuw A, Brutschy B (2010) The structure of adenine monohydrates studied by femtosecond multiphoton ionization detected IR spectroscopy and quantum chemical calculations. Phys Chem Chem Phys 12 863... [Pg.270]

Egorov, S. E., Letokhov, V. S., and Shibanov, A. N. (19846) Laser multiphoton-ionization detection of molecules adsorbed on a surface. Chemical Physics, 85, 349-353. [Pg.284]

Another example of a teclmique for detecting absorption of laser radiation in gaseous samples is to use multiphoton ionization with mtense pulses of light. Once a molecule has been electronically excited, the excited state may absorb one or more additional photons until it is ionized. The electrons can be measured as a current generated across the cell, or can be counted individually by an electron multiplier this can be a very sensitive technique for detecting a small number of molecules excited. [Pg.1123]

The most widely used of these tecluiiques is resonance-enlianced multiphoton ionization (REMPI) [ ]. A schematic energy-level diagram of the most conunonly employed variant (2 + 1) of this detection scheme is illustrated in the... [Pg.2082]

Dagdigian P J, Varley D F, Liyanage R, Gordon R J and Field R W 1996 Detection of DCI by multiphoton ionization and determination of DCI and HCI internal state distributions J. Chem. Phys. 106 10 251-62... [Pg.2088]

In contrast to the ionization of C q after vibrational excitation, typical multiphoton ionization proceeds via the excitation of higher electronic levels. In principle, multiphoton ionization can either be used to generate ions and to study their reactions, or as a sensitive detection technique for atoms, molecules, and radicals in reaction kinetics. The second application is more common. In most cases of excitation with visible or UV laser radiation, a few photons are enough to reach or exceed the ionization limit. A particularly important teclmique is resonantly enlianced multiphoton ionization (REMPI), which exploits the resonance of monocluomatic laser radiation with one or several intennediate levels (in one-photon or in multiphoton processes). The mechanisms are distinguished according to the number of photons leading to the resonant intennediate levels and to tire final level, as illustrated in figure B2.5.16. Several lasers of different frequencies may be combined. [Pg.2135]

As an example, we mention the detection of iodine atoms in their P3/2 ground state with a 3 + 2 multiphoton ionization process at a laser wavelength of 474.3 run. Excited iodine atoms ( Pi/2) can also be detected selectively as the resonance condition is reached at a different laser wavelength of 477.7 run. As an example, figure B2.5.17 hows REMPI iodine atom detection after IR laser photolysis of CF I. This pump-probe experiment involves two, delayed, laser pulses, with a 200 ns IR photolysis pulse and a 10 ns probe pulse, which detects iodine atoms at different times during and after the photolysis pulse. This experiment illustrates a frindamental problem of product detection by multiphoton ionization with its high intensity, the short-wavelength probe laser radiation alone can photolyse the... [Pg.2135]

We have also carried out preliminary experiments in which we have detected the laser desorption of ethylene, cyanogen, methanol, and benzene from the Pt(s)[7(111) x (100)] surface. These spectra are shown in Figure 9. In the experiments involving ethylene, cyanogen, and methanol only neutral species are desorbed. In the case of benzene we observe the molecular parent ion in the absence of the electron beam. We believe that this is due to resonance multiphoton ionization of the benzene by the laser after desorption (resonance multiphoton ionization of benzene is very efficient with 249 nm radiation). These spectra are in marked contrast to the results of SIMS experiments which produce a wide variety of complex metal-adsorbate cluster ions. In the case of ethylene, our experiments were performed at 140 K, and under these conditions ethylene is known to be a molecular x-bonded species on the surface. In SIMS under these conditions the predominant species is CH (15)t but in the laser desorption FTMS experiments neutral ethylene is the principal species detected at low laser power. [Pg.249]

AFID = alkali-flame ionization detection FID = flame ionization detection FPD = flame photometric detection GC = gas chromatography IGEFET = interdigitated gate electrode field-effect transistor ITMS = ion trap mass spectrometry MIMS = multiphoton ionization mass spectrometry MS = mass spectrometry... [Pg.136]

Syage JA, Pollard JE, Cohen RB. 1988. Ultrasensitive detection of atmospheric constituents by supersonic molecular beam, multiphoton ionization mass spectroscopy. El Segundo, CA Aerospace Corp. NTIS No. AD-A202-299. [Pg.154]

For ion TOF measurement a probe laser was used to ionize reaction products in the reaction zone. The (1 + F) resonance-enhanced multiphoton ionization (REMPI) method was adapted for H-atom detection. The necessary vacuum ultraviolet (VUV) radiation near 121.6 nm (for Lyman-a transition) can readily be generated by a frequency-tripling technique in a Kr cell.37 The sensitivity of this (1 +1 ) REMPI detection scheme is extremely high owing to the large absorption cross-section of Lyman-a transition,... [Pg.6]

The advancement of the application of lasers in combination with the molecular beam technique has made a great impact in the understanding of primary photodissociation processes. For state-specific detection of small fragments, laser-induced fluorescence, multiphoton ionization, and coherent laser scattering have provided extremely detailed information on the dynamics of photodissociation. Unfortunately, a large number of interesting... [Pg.163]

Luntz and co-workers have recently carried out an impressive study that follows in the spirit of the Eley-Rideal work.44 Specifically, laser-assisted recombination of N-atoms desorbing to form gas-phase N2 on Ru(0001) was investigated. Experimental measurements of state-selectively detected N2 recoiling from the surface recombination event were obtained using resonance enhanced multiphoton ionization and ion time-of-flight methods. In this way translational energy distributions of individual rovibrational states could be obtained experimentally. In addition, N2-vibrational population distributions could be derived. [Pg.393]

The general principle of detection of free radicals is based on the spectroscopy (absorption and emission) and mass spectrometry (ionization) or combination of both. An early review has summarized various techniques to detect small free radicals, particularly diatomic and triatomic species.68 Essentially, the spectroscopy of free radicals provides basic knowledge for the detection of radicals, and the spectroscopy of numerous free radicals has been well characterized (see recent reviews2-4). Two experimental techniques are most popular for spectroscopy studies and thus for detection of radicals laser-induced fluorescence (LIF) and resonance-enhanced multiphoton ionization (REMPI). In the photochemistry studies of free radicals, the intense, tunable and narrow-bandwidth lasers are essential for both the detection (via spectroscopy and photoionization) and the photodissociation of free radicals. [Pg.472]

A number of other laser spectroscopic techniques are of interest but space does not permit their discussion. A few specialized methods of detecting laser absorption worthy of mention include multiphoton ionization/mass spectrometry (28), which is extremely sensitive as well as mass selective for gas-phase systems optically detected magnetic resonance (29) laser intracavity absorption, which can be extremely sensitive and is applicable to gases or solutions (30) thermal blooming, which is also applicable to very weak absorbances in gases or liquids (31) and... [Pg.468]

Y. Nosenko, M. Kunitski, R. P. Thummel, A. Kyrychenko, J. Herbich, J. Waluk, C. Riehn, and B. Brutschy, Detection and structural characterization of clusters with ultrashort lived electro nically excited states IR absorption detected by femtosecond multiphoton ionization. J. Am. Chem. Soc. 128, 10000 (2006). [Pg.52]

Remote control model, 40 183-184 Reoxidation, 41 198-199 heat of, 40 19-22 Resolution, 33 251-254 Resonance-enhanced multiphoton ionization, in detection of surface-generated gas-phase radicals, 35 181-182... [Pg.188]

A technique that has been used in laboratory studies for oxides of nitrogen and shows promise for field measurements is resonance-enhanced multiphoton ionization (REMPI) (Guizard et al., 1989 Lemire et al., 1993 Simeonsson et al., 1994). For example, Akimoto and co-workers (Lee et al., 1997) have reported a REMPI system in which a (1 + 1) two-photon absorption of light at 226 nm by NO results in ionization (vide supra). They report a detection limit of 16 ppt in their laboratory studies. Other oxides of nitrogen such as NOz and HN03 can also photodissociate in the... [Pg.569]

Guizard, S D. Chapoulard, M. Horani, and D. Gauyacq, Detection of NO Traces Using Resonantly Enhanced Multiphoton Ionization A Method for Monitoring Atmospheric Pollutants, Appl Phys. B, 48, 47f-477 (1989). [Pg.644]


See other pages where Multiphoton ionization detection is mentioned: [Pg.4]    [Pg.4]    [Pg.1199]    [Pg.372]    [Pg.529]    [Pg.562]    [Pg.5]    [Pg.249]    [Pg.2]    [Pg.90]    [Pg.165]    [Pg.189]    [Pg.195]    [Pg.75]    [Pg.111]    [Pg.1125]    [Pg.1127]    [Pg.160]    [Pg.48]    [Pg.277]    [Pg.255]    [Pg.24]    [Pg.401]    [Pg.403]    [Pg.403]    [Pg.29]    [Pg.53]   


SEARCH



Multiphoton

Multiphoton detection

Multiphoton ionization

Multiphoton ionization detection mechanism

Multiphoton ionization detection photofragment

Multiphoton ionization detection photofragments

Multiphoton ionization detection spectrum

Multiphoton ionization detection states

© 2024 chempedia.info