Montmorillonite synthetic

Other than montmorillonite, synthetic mica, saponite and hectorite were used to synthesize a nylon 6-clay hybrid. The nano composites fabricated by using each of these types of clay were called NCH, NCHM, NCHP and NCHH. 

The reaction of iodobenzene with acrylate is a good synthetic method for the cinnamate 17[7]. In the competitive reaction of acrylate with a mixture of 0-and /i-iodoanisoles (18 and 19), the o-methoxycinnamate 20 was obtained selectively owing to the molecular recognition by interlamellar montmorillonite ethylsilyldiphenylphosphine (L) as a heterogenized homogeneous catalyst used as a ligand[28]. 

Considering the formation of saturated five-membered heterocycles with two heteroatoms, it is worth to note the possibility to prepare 1,3-dioxolanes, dithiane, oxathianes 148 [93] and dioxolanones 149 [94] by condensation of the corresponding carbonyl compounds under microwave irradiation in acid medium (Scheme 52). The reaction, which is very useful for the protection of carbonyl compounds or for the preparation of useful synthetic intermediates, has also been carried out under batch conditions over Montmorillonite KIO clay in more than 150 g scale, using a 1 L quartz reactor [95]. 

For the synthesis of coumarins, the Pechmann reaction [145] is one of the most popular synthetic routes. As the reaction is conventionally carried out at high temperature, two microwave-assisted versions have been recently described. Besson and co-workers described the cyclocondensation of different m-amino phenols 226 with /1-ketoesters 227 on graphite/montmorillonite KIO support (Scheme 83). The use of graphite was crucial in the development of the reaction conditions. In fact, microwave irradiation of the reagents using different conditions gave poor results in terms of yields and purity. The optimized conditions, using a monomode microwave system, employed... 

The first examples of cationic exchange of bis(oxazoline)-metal complexes used clays as supports [49,50]. Cu(II) complexes of ligands ent-6a, 6b, and 6c (Fig. 15) were supported on three different clays laponite (a synthetic clay), bentonite, and montmorillonite KIO. The influence of the copper salt from which the initial complexes were prepared, as well as that of the solvent used in the cationic exchange, was analyzed. 

FIG. 13 Reduction of the relative permeability coefficient is dependent on the clay platelet aspect ratio in the system of polyimide-clay hybrid with water vapor as the permeate. Each hybrid contains 2 wt% clay. The aspect ratios for hectorite, saponite, montmorillonite, and synthetic mica are 46, 165, 218, and 1230, respectively. (From Ref. 71.)... 

We alluded earlier to the variety of structural modifications which may he observed in sheet silicates. Clearly it is a matter of considerable in jortance to he able to determine if, for example, the aluminium content within a clay arises p a ely from octahedral substitution (as in montmorillonite) or whether there is some tetrahedral component (as in heidellite). a1 MASNMR readily provides the necessary answers. Figvire 1 illustrates the a1 spectrum for a synthetic heidellite material with Na as charge balancing cation. Aluminium in two distinct chemical environments is observed, with chemical shifts corresponding to octahedrally and tetrahedrally co-ordinated aluminium. 

Vaccari (1983,1999) has given a state-of-the-art account of the preparation and catalytic properties of cationic and anionic clays. Some examples of industrial importance have also been reported. Clays exhibit many desirable features, such as low cost, wide range of preparation variables, ease of set-up and wOrk-up, high selectivity, and environmental friendliness. Cationic clays are widespread in nature, whereas anionic clays are rarely found in nature, but they can be synthesized cheaply. Cationic clays are prepared from the minerals but industrial anionic clays are generally synthetic. Smectite clays exhibit both Brpnsted and Lewis acid sites on the edges of the crystals. Hammet s acidity function values are as follows Na -montmorillonite (M), -3 to t- 1.5 NH4VM -3 to 1.5 H M -8.2 to -5.6 acid activated clay less than -8.2. Laporte also has a synthetic version of cationic clays, Laponite. The acid... 

Five common desiccant materials are used to adsorb water vapor montmorillonite clay ([(Na,Cao.5)o.33(Al,Mg)2Si40io(OH)2 H20], silica gel, molecular sieves (synthetic zeolite), calcium sulfate (CaS04), and calcium oxide (CaO). These desiccants remove water by a variety of physical and chemical methods adsorption, a process whereby a layer or layers of water molecules adhere to the surface of the desiccant capillary condensation, a procedure whereby the small pores of the desiccant become filled with water and chemical action, a procedure whereby the desiccant undergoes a chemical reaction with water. 

Smectites are 2 1 charged layered silicates from natural (montmorillonite, hectorite, beidellite, saponite etc.) or synthetic (synthetic fluorohectorites, such as... 

A new synthetic route for functionalized polyhydroxyalkyl-pyrimidines starting from unprotected aldoses and based on montmorillonite K-10 catalysis and solvent-free microwave irradiation conditions, has been reported by Yadav et al,m Thus, reaction of D-glucose and D-xylose with semicarbazide or thiosemicarbazide (186) in the presence of montmorillonite K-10, under microwave irradiation, proceeded via domino cycloisomerization, dehydrazination, and dehydration of the intermediate semi- or thiosemicarbazones (187) to afford l,3-oxazin-2-ones or l,3-oxazine-2-thiones (188) in one single step and in yields between 79% and 85% (Scheme 34). Other mineral catalysts tested, such as silica gel and basic alumina, were far less effective for this transformation and only silica gel was active at all, giving low yields (15-28%) of compounds 188a-d. The l,3-oxazin-2-ones(thiones) thus synthesized were subsequently converted into the target pyrimidines by reaction with aromatic... 

An Iranian group described the synthesis of some [l,3,4]thiadiazolo[2,3-c][l,2,4]triazinones 88 <2002PS2399> and in the course of the synthetic pathway the dihydro derivative 87 was first obtained. These authors found that microwave irradiation of 87 on montmorillonite in the presence of nitrobenzene allowed to accomplish the final oxidative step and yielded the fully conjugated end-product in good yields (50-62%). The reaction as proceeding was interpreted by electron transfer to 89 caused by the microwave irradiation followed by the formation of the intermediate radical 90. 

Exchange of organic ammonium cations. Exchange selectivity of monovalent alkyl ammonium cations in montmorillonites (40-41) and octahedrally substituted synthetic clay minerals (laponite) increases with their chain length (42) and along the series... 

Commercial synthetic catalysts are amorphous and contain more silica than is called for by the preceding formulas they are generally composed of 10 to 15% alumina (AI2O3) and 85 to 90% silica (Si02). The natural materials—montmorillonite, a nonswelling bentonite, and halloysite—are hydrosilicates of aluminum, with a... 

Figure 41. Phase diagram for the extensive variables R -R -Si combining the data for synthetic magnesian chlorites and the compositional series of natural sepiolites and palygorskites. Numbers represent the major three-phase assemblages related to sepiolite-palygorskite occurrence in sediments. Chi = chlorite M03 = trioctahedral montmorillonites M02 = dioctahedral montmorillonite Sep = sepiolite Pa = palygorskite Kaol = kaolinite T = talc.

---