Molten carbonate fuel cells operating principles

Fig. 1 Operation principle of the various types of fuel cells PEMFC polymer electrolyte membrane fuel cell, AFC alkatine fuel cell, PAFC phosphoric add fuel cell, MCFC molten carbonate fuel cell, SOFC sohd oxide fuel cell...

Figure 6-1 Principles of Operation of Molten Carbonate Fuel Cells (FuelCell Energy)...

Fuel cells can be classified into phosphoric acid fuel cells, molten carbonate fuel cells, solid oxide full cells, polymer electrolyte membrane fuel cells, and alkaline full cells according to the type of electrolyte used (150). All these fuel cells operate on the same principle, but the t) e of fuel used, operating speed, the catalyst used and the electrolyte used are different. In particular, pol5mier electrolyte membrane fuel cells can be used in small-sized stationary power generation equipment or transportation systems due to their high reaction speed, low operating temperature, high output density, rapid startup, and variation in the requested output. 

Since the type of electrolyte material dictates operating principles and characteristics of a fuel cell, a fuel cell is generally named after the type of electrolyte used. For example, an alkaline fuel cell (AFC) uses an alkaline solution such as potassium hydroxide (KOH) in water, an acid fuel cell such as phosphoric acid fuel cell (PAFC) uses phosphoric acid as electrolyte, a solid polymer electrolyte membrane fuel cell (PEMFC) or proton exchange membrane fuel cell uses proton-conducting solid polymer electrolyte membrane, a molten carbonate fuel cell (MCFC) uses molten lithium or potassium carbonate as electrolyte, and a solid oxide ion-conducting fuel cell (SOFC) uses ceramic electrolyte membrane. 

Once the principles of operating in a molten salt environment have been grasped, suitable extrapolations or interpolations of materials requirements and cell and equipment designs can be made between different systems. In bringing a molten salt process into commercial operation, unique materials problems requiring special solutions often limit its progress, but practically never prevent it. Thus, if a desired result may not be achieved for theoretical reasons in any alternative electrolyte, because of electrochemical instability, for example, then initial development costs and difficulties become inconsequential. Such has been the case with thermal batteries, " sodium-sulfur batteries, molten fluoride nuclear reactors, and molten carbonate fuel... 

The carbonate fuel cell principle of operation is based on transfer of the oxygen in the form of carbonate ions from the cathode to the anode. In many ways, this is similar to Solid Oxide Fuel Cell (SOFC) technology, with the main differences being that the medium of the ionic transfer is a molten carbonate immobilized in a ceramic matrix. Various eutectic mixtures of lithium, potassium, and sodium carbonates have been used as electrolyte with the most prevalent ones being 38Li/62K or 60Li/40Na carbonate mixtures. 

---