Molecular weight distribution hydrolysis

Some tailor-made homopolymers can serve as starting points for chemical modifications to yield new species. Poly(hydroxyethyl methacrylate) and poly(glyceryl methacrylate) 16), already mentioned, are obtained upon hydrolysis of the OH-protecting groups that allow the anionic polymerization to proceed. Another example is the acid hydrolysis of poly(t-butyl methacrylate), a reaction which proceeds easily to completion, yielding poly(methacrylic acid) of known degree of polymerization and narrow molecular weight distribution 44 45). 

Although polymers in-service are required to be resistant toward hydrolysis and solar degradation, for polymer deformulation purposes hydrolysis is an asset. Highly crystalline materials such as compounded polyamides are difficult to extract. For such materials hydrolysis or other forms of chemolysis render additives accessible for analysis. Polymers, which may profitably be depolymerised into their monomers by hydrolysis include PET, PBT, PC, PU, PES, POM, PA and others. Hydrolysis occurs when moisture causes chain scissions to occur within the molecule. In polyesters, chain scissions take place at the ester linkages (R-CO-O-R ), which causes a reduction in molecular weight as well as in mechanical properties. Polyesters show their susceptibility to hydrolysis with dramatic shifts in molecular weight distribution. Apart from access to the additives fraction, hydrolysis also facilitates molecular characterisation of the polymer. In this context, it is noticed that condensation polymers (polyesters, -amides, -ethers, -carbonates, -urethanes) have also been studied much... 

By employing anionic techniques, alkyl methacrylate containing block copolymer systems have been synthesized with controlled compositions, predictable molecular weights and narrow molecular weight distributions. Subsequent hydrolysis of the ester functionality to the metal carboxylate or carboxylic acid can be achieved either by potassium superoxide or the acid catalyzed hydrolysis of t-butyl methacrylate blocks. The presence of acid and ion groups has a profound effect on the solution and bulk mechanical behavior of the derived systems. The synthesis and characterization of various substituted styrene and all-acrylic block copolymer precursors with alkyl methacrylates will be discussed. 

Various substituted styrene-alkyl methacrylate block copolymers and all-acrylic block copolymers have been synthesized in a controlled fashion demonstrating predictable molecular weight and narrow molecular weight distributions. Table I depicts various poly (t-butylstyrene)-b-poly(t-butyl methacrylate) (PTBS-PTBMA) and poly(methyl methacrylate)-b-poly(t-butyl methacrylate) (PMMA-PTBMA) samples. In addition, all-acrylic block copolymers based on poly(2-ethylhexyl methacrylate)-b-poly(t-butyl methacrylate) have been recently synthesized and offer many unique possibilities due to the low glass transition temperature of PEHMA. In most cases, a range of 5-25 wt.% of alkyl methacrylate was incorporated into the block copolymer. This composition not only facilitated solubility during subsequent hydrolysis but also limited the maximum level of derived ionic functionality. 

Symmetric triblock copolymers of the ABA type, where B was PTHF and A poly(2-methyl-2-oxazoline), PMeOx, were prepared by cationic polymerization with trifluoromethanesulfonic anhydride as a difunctional initiator [58]. Subsequent hydrolysis of the PMeOx blocks with HC1 in a methanol/ water mixture resulted in the formation of the corresponding polyethylen-imine blocks (Scheme 20). Samples with relatively low molecular weight distributions were obtained. 

A PEO macroinitiator with Si — H end groups was prepared through the condensation of monohydroxy-terminated PEO with CISiMePhH in the presence of pyridine [130]. The presence of the Si —Ph moiety prevents the hydrolysis of the Si — O — C bond, due to steric factors. This macroinitiator was subsequently used for the synthesis of poly(ferrocenyldimethylsilane), PFS, to afford PEO-fc-PFS block copolymers. The ROP of the ferrocenophane was conducted catalytically using the Pt(0) Karstedt s catalyst in toluene at 25 °C (Scheme 55). Rather broad molecular weight distributions (higher than 1.3) were obtained. 

Polyvinyl alcohol(PVA) was obtained from the Kurarey Co.,Ltd. Japan the molecular weight and the degree of hydrolysis were determined by the supplier as 88,000 and 80 %, respectively. The molecular weight and the molecular weight distribution data of the polymer samples are shown in Table 1. 

Hydrolysis of Copolyamide-esters (CPAEs) by Lipase (jj,). CPAEs were synthesized by the amide-ester interchange reaction between polyamide and polyester. The length of the polyamide blocks was measured after hydrolysis of ester bonds in CPAE by alkali at 30 C. The infrared spectra after hydrolyzing ester bonds on CPAEs showed that the ester bonds were almost completely removed. The molecular weight distribution of polyamide blocks was examined by GPC (Table II). The following samples were used CPAE-1 (reaction time for synthesis, 1 hr) and CPAE-2 (reaction time, U hr) composed of nylon 6 and PCL at a 50/50 molar ratio, CPAE-3 (reaction time, 1 hr) and CPAE-U (reaction time,... 

The molecular weight increases with increasing conversion. Regulation of the molecular weight can be achieved by adding small amounts of substances (e.g., benzoic acid) that can react with the polyamide chains by transamidation. Because of the transamidation reaction and hydrolysis of amide bonds, an equilibrium molecular-weight distribution is finally attained (see Sect. 4.1). 

---