Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Filament Winding Molds

Compression molding Filament winding Hand lay-up Mat molding Pressure bag molding Continuous pultrusion Injection molding Spray-up... [Pg.557]

Bag Molding Hinterspritzen Contact Molding Filament Winding Fabricating RP Tank... [Pg.457]

Modar. [ICI Acrylics] Modified acrylic resins for resin transfer molding, filament winding, hand lay-up, spray-up, pultrusion. [Pg.235]

Rovings are rope-hke bundles of continnons untwisted strands for nse in snch processes as perform press molding, filament winding, spray-np, pnltmsion, and centrifugal casting. They can also be converted into chopped strand mats or cnt into short fibers for molding compounds. [Pg.209]

Practically all resins (TS and TP) are used in RPs, but a few predominate (Tables 7-2 to 7-5), with TS polyesters being the major type. Typical polyesters are summarized in Table 7-4. The polyester RPs are used in all processes, but their principal use is in the low pressure methods (spray-up, hand lay-up, pressure bag molding, casting, pultrusion, rotational molding, filament winding, and compression molding. [Pg.255]

Injection molding Hand lay-up Spray-up Compression molding Preform molding Filament winding Pultrusion Resin transfer molding Reinforced reaction injection molding ... [Pg.269]

Compression molding Filament winding Same as above Blower or fan blades, heat-resistant knobs, electrical boxes, and parts in industrial machinery The blend placed in mold and heated under pressure within a steam-heated press A continuous yam or fiber that is impregnated with resin/catalyst mix is wound around a tool mandrel and cured... [Pg.93]

Polyacrylate, polyetherketone, polyethersulfone, and polyetherimide have been processed in the same way. The polymer melt readily wets glass fibers. These materials have been used in resin transfer molding, filament winding, and casting. [Pg.123]

Polyester can be used to fabricate a variety of products by many techniques such as open-mold casting, hand layup, spray-up, vacuum-bag molding, matched metal die molding, filament winding, pultrusion, encapsulation, centrifugal casting, and injection molding. [Pg.424]

Compression molding Preform molding Filament winding Pultrusion Resin transfer molding... [Pg.678]

Typicai processing methods resin transfer molding, resin infusion molding, filament winding, prepreg consolidation ... [Pg.485]

Three high volume technologies were used to produce composite parts compression molding, filament winding, and pultrusion. Furthermore, two compression molding techniques were used, one suitable for continuous fiber-reinforced and another for long chopped fiber-reinforced composites (LFTs). [Pg.194]

See other pages where Filament Winding Molds is mentioned: [Pg.440]    [Pg.440]    [Pg.557]    [Pg.123]    [Pg.459]    [Pg.459]    [Pg.522]    [Pg.45]    [Pg.236]    [Pg.403]    [Pg.906]    [Pg.906]    [Pg.234]    [Pg.260]    [Pg.260]    [Pg.618]    [Pg.5]    [Pg.236]    [Pg.403]    [Pg.827]    [Pg.491]    [Pg.2761]    [Pg.89]    [Pg.16]    [Pg.500]    [Pg.705]    [Pg.600]    [Pg.708]    [Pg.609]   


SEARCH



© 2024 chempedia.info