Modeling thermal effects

D. Bonvin, P. de Valliere, and D.W.T. Rippin. Application of estimation techniques to batch reactors. I. Modelling thermal effects. Computers and Chemical Engineering, 13 1-9, 1989. 

Bonvin D, DevaUiere P, Rippin D. Apphcation of estimation techniques to batch reactors. 1. Modeling thermal effects. Comp Chem Eng 1989 13 1-9. 

The time constant R /D, and hence the diffusivity, may thus be found dkecdy from the uptake curve. However, it is important to confirm by experiment that the basic assumptions of the model are fulfilled, since intmsions of thermal effects or extraparticle resistance to mass transfer may easily occur, leading to erroneously low apparent diffusivity values. 

Due to thermal effects such devices must operate at temperatures well below the electron charging energy of 2C. With state-of-the-art fabrication technology, the capacitance is typically of the order 10 F, which requires temperatures below 1 K. Even with further miniaturisation, it is unlikely that these devices will be feasible at room temperature. Even so, there has been work in modeling this type of device for use in digital circuits (73). 

Although much as been done, much work remains. Improved material models for anisotropic materials, brittle materials, and chemically reacting materials challenge the numerical methods to provide greater accuracy and challenge the computer manufacturers to provide more memory and speed. Phenomena with different time and length scales need to be coupled so shock waves, structural motions, electromagnetic, and thermal effects can be analyzed in a consistent manner. Smarter codes must be developed to adapt the mesh and solution techniques to optimize the accuracy without human intervention. 

Computational fluid dynamics methods may allow for more accurate predictions. These models account for turbulence and other parameters such as thermal effects. A description of these methods is included in Chapter 11. 

This section deals mainly with the interaction of thermal models as outlined in Section J 1.3 and airflow models as described in Section 11.4 for the purpose of integrated modeling of thermally induced (stack-driven) natural ventilation, governed by the thermal behavior of the building. For the integrated analysis ol air velocity fields and radiative and thermal effects in the building using CFD codes, see also Section 11.2 and Ott and Schild.-... 

Heat transfer in micro-channels occurs under superposition of hydrodynamic and thermal effects, determining the main characteristics of this process. Experimental study of the heat transfer in micro-channels is problematic because of their small size, which makes a direct diagnostics of temperature field in the fluid and the wall difficult. Certain information on mechanisms of this phenomenon can be obtained by analysis of the experimental data, in particular, by comparison of measurements with predictions that are based on several models of heat transfer in circular, rectangular and trapezoidal micro-channels. This approach makes it possible to estimate the applicability of the conventional theory, and the correctness of several hypotheses related to the mechanism of heat transfer. It is possible to reveal the effects of the Reynolds number, axial conduction, energy dissipation, heat losses to the environment, etc., on the heat transfer. 

The quasi-one-dimensional model of laminar flow in a heated capillary is presented. In the frame of this model the effect of channel size, initial temperature of the working fluid, wall heat flux and gravity on two-phase capillary flow is studied. It is shown that hydrodynamical and thermal characteristics of laminar flow in a heated capillary are determined by the physical properties of the liquid and its vapor, as well as the heat flux on the wall. 

The thermal effects taken into consideration in the model were ... 

Atmospheric releases of flammable gases such as hydrogen may lead to major fires with extensive effects on the surroundings. In activities where hazards are associated with cloud fires, there is the need of societal risk assessment that involves the estimation of hazardous zones due to the resulting thermal radiation. However, till now only limited work has been done on modeling the effects of flash fires, in a way that available techniques may be judged insufficient [47],... 

This study was carried out to simulate the 3D temperature field in and around the large steam reforming catalyst particles at the wall of a reformer tube, under various conditions (Dixon et al., 2003). We wanted to use this study with spherical catalyst particles to find an approach to incorporate thermal effects into the pellets, within reasonable constraints of computational effort and realism. This was our first look at the problem of bringing together CFD and heterogeneously catalyzed reactions. To have included species transport in the particles would have required a 3D diffusion-reaction model for each particle to be included in the flow simulation. The computational burden of this approach would have been very large. For the purposes of this first study, therefore, species transport was not incorporated in the model, and diffusion and mass transfer limitations were not directly represented. 

The simulation of the thermal effects of the steam reforming reaction was based on a published reaction model (Hou and Hughes, 2001) for methane... 

Verdu AMC, Mas MT (2004) Modeling the effects of thermal shocks varying in temperature and duration on cumulative germination of Portulaca oleracea L. Seed Sci Technol... 

In Vienna, Mark published a number of fundamental papers. Their topics include polymerization mechanism (46, 47, 48), thermal polymerization (49, 50), polymerization kinetics (51), the effect of oxygen on polymerization (52), and measurement of molecular weight distribution (53). Guth and Mark expanded their modeling of extended and balled thread molecules to include rubber. The result of their studies was a series of very important papers in which the thermal effect on expansion and relaxation of rubber is explained (54, 55, 56). 

The FvdM as well as the BMVW model neglects thermal fluctuation effects both are T = 0 K theories. Pokrovsky and Talapov (PT) have studied the C-SI transition including thermal effects. They found that, for T 0 K the domain walls can meander and collide, giving rise to an entropy-mediated repulsive force of the form F where I is the distance between nearest neighbor walls. Because of this inverse square behavior, the inverse wall separation, i.e. the misfit m, in the weakly incommensurate phase should follow a power law of the form... 

Most of the models considered in this chapter involve vibrational modes with frequencies that are large compared to typical thermal energies. In such situations, thermal effects can be neglected and the initial state of the vibrational DoF is given by the vibrational ground state 0) in the electronic ground state /o) [163], that is. 

Tadmor and Broyer [16, 17] produced two more solids conveying models a modified version of Tadmor s earlier model [1], which assumed isothermality [16], and a second model that allowed for thermal effects [17]. Later, a model by Strand et al. [18] was developed based on the Tadmor-Klein model for starve-fed solids conveying. 

Jayaraman, K.L.. Reifsnider, K.L. and Swain, R.E. (1993). Elastic and thermal effects in the interphase Part [[. Comments on modelling studies. J. Composite Technoi. Res. (JCTRERj 15, 14-22. 

---