Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Mine clearing equipment

Mine Clearing Equipment. Devices used to actuate land mines without damage to personnel or equipment. Expl devices are typified by a group of linear shaped prefabricated structural sections, filled with composition expls, with a nose section and a towing and pushing attachment, designed for assembly into a device to be propelled by any standard tank. [Pg.151]

Mechanical equipment used in combat operations to clear mines includes armored vehicles equipped with devices such as plows, flails, and rollers. This equipment clears a path by pushing mines aside or detonating them. It is not effective in rough or rocky terrain and against more advanced, off-route or wide-area mines. However, these advanced mines do not yet make up a large portion of the landmines already emplaced in Third World countries. For these reasons, and because of the potential environmental impact, such as pollution and soil erosion, heavy mechanical equipment is of limited use for wide-area clearance. [Pg.191]

In areas occupied and protected by free world forces, the enemy employs mines to delay and disrupt the use of roads and paths and to cause the allies to divert forces to guard and clear those routes. In addition to the threat to military traffic and lawful civilian movement, the free world personnel and equipment employed In patrolling the roads and In detecting and... [Pg.11]

The national standards for the coal mine equipment shell material are clear. But the material is not ruled strictly for the mine robot flame-proof enclosure. The cast steel, ordinary mine equipment shell material, couldn t meet the requirements of the AMDR obviously with high precision and high maneuver performance. Light alloy with low density and high intensity is the best choice of the AMDR flame-proof encloser material. [Pg.396]

Several types of respirators can be used to protect workers from respiratory hazards and each type is made for use in a specific environment. Not all respiratory equipment marketed is approved. Federal regulations require the use of respirators that have been tested and approved by the Mine Safety and Health Administration (MSHA) and NIOSH. Approval numbers are clearly written on all approved respiratory equipment. Management determines that respirators are mandated in certain situations and must be diligent in enforcing compliance. They should not have a policy that requires respirators but leaves compliance up to the employees. [Pg.196]

Area mining occurs on level ground, where workers use excavation equipment to dig a series of long parallel strips, or cuts, into the earth. The overburden is cleared from each cut, and the material (known as spoil) is stacked alongside the long trench. After the exposed coal is shoveled from the cut, workers dump the spoil back into the trench to help reclaim the mined area. [Pg.732]


See other pages where Mine clearing equipment is mentioned: [Pg.384]    [Pg.384]    [Pg.48]    [Pg.11]    [Pg.324]    [Pg.352]    [Pg.358]    [Pg.863]    [Pg.244]    [Pg.14]    [Pg.154]    [Pg.36]    [Pg.388]    [Pg.40]    [Pg.11]    [Pg.324]    [Pg.352]    [Pg.358]    [Pg.374]    [Pg.732]    [Pg.746]    [Pg.804]    [Pg.872]    [Pg.873]    [Pg.873]    [Pg.53]    [Pg.177]    [Pg.125]    [Pg.583]    [Pg.280]    [Pg.738]    [Pg.36]    [Pg.543]    [Pg.36]    [Pg.176]    [Pg.14]    [Pg.408]    [Pg.667]    [Pg.671]    [Pg.73]    [Pg.336]    [Pg.389]    [Pg.313]   
See also in sourсe #XX -- [ Pg.8 , Pg.33 ]




SEARCH



Clear

Clearness

Mining equipment

© 2024 chempedia.info