Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Military requirement

A Mil Spec, M1L-S-14195A (Ref 6a), covers the USA military requirement for styrene Polymer... [Pg.326]

Another extremely important military requirement that is not usually associated with civilian requirements is stability in prolonged storage under adverse conditions. For example, the first lots of fly spray that were shipped to North Africa, in 1942, contained pyrethrum as the principal active ingredient. It was not possible to store this material under cover and much of it remained under constant exposure to the intense tropical sun, undoubtedly deteriorating very rapidly. Covered storage facilities are the exception rather than the rule in a combat theater of operations, and all insecticide compounds furnished to the military forces should withstand this type of storage. [Pg.217]

Another simple device suitable to be ignited by ordinary matches is the Quickmatcb, which consists of several cotton strands impregnated with BkPdr (See Vol 2 of Encycl, pp B165ff) in starch paste. It has a more-or-less well-defined burning time and thus acts as a delaying element, similar to safety fuse (Ref 57, p 191). Its military requirements are covered in MIL-Q-378B. [Pg.761]

Ethyl Diethanolamine, US Military Requirements and Tests, as described in Specification MIL-E-10660B (CmlC), 27 Apr 1959- Accdg to Notice 1, 3 Feb 1972, theraaterial covered by the spec was used in the production of Nitrogen Mustard, HN—1, which is obsolete. Nevertheless, it. is of interest to describe this Spec REQUIREMENTS AND TESTS ... [Pg.98]

A) Development Type, Designates an item being developed to meet a military requirement. This category is further classified in the Ordnance Corps as follows ... [Pg.225]

Explosive Composition PBXN-5. It consists of HMX 95 Viton (vinylidene fluoride hexa-fluoropropylene copolymer) 5%, and has a rate of deton of 8760m/sec at density 1.82g/cc. Its military requirements are given in Specification MIL-E-81111A, Explosive, Plastic-Bonded Molding Powder (Feb 1973)... [Pg.275]

US Military requirements and tests for Sodium Formate for use as a reagent are in Specification MIL-S-11168 (May 1951)... [Pg.553]

Carbon tetrachloride represents an example of the change to petroleum raw materials in this field. The traditional source of this widely used product has been the chlorination of carbon disulfide, either directly or through the use of sulfur dichloride. Military requirements in World War II caused an increase in demand, and in addition to expansion of the older operations, a new process (28) was introduced in 1943 it involved direct chlorination of methane at 400° to 500° C. and essentially atmospheric pressure. This apparently straight-forward substitution of halogen for hydrogen in the simplest paraffin hydrocarbon was still a difficult technical accomplishment, requiring special reactor construction to avoid explosive conditions. There is also the fact that disposal of by-product hydrochloric acid is necessary here, though this does not enter the carbon disulfide picture. That these problems have been settled successfully is indicated by the report (82) that the chlorination of methane is the predominant process in use in the United States today, and it is estimated that more than 100,000,000 pounds of carbon tetrachloride were so produced last year. [Pg.291]

Another group of chlorinated hydrocarbons comprises those made from paraffin wax. Major applications are in extreme pressure lubricants and as extenders and plasticizers in surface coatings and in vinyl plastics. The chlorinated waxes were also widely applied in flameproofing cotton fabrics, which led to large consumption by the military. It is believed that current military requirements for flame-resistant fabrics will be met by vinyl sheeting of vinyl-coated textile products, so that the World War II demand for the halogenated waxes will not be repeated. [Pg.293]

Igniter Composition NllAl, which consists of DADNPh, NS (Nitrostarch), powdered wood charcoal and potassium chlorate (percentages are not given). Its US military requirements were covered by Specification MIL-S-10641A (Ord)(1957) and its analytical procedures are described as... [Pg.55]

US military requirements and tests for Basic Lead Styphnate are given after the Refs for Trinitrodihydroxybenzene and Derivatives... [Pg.172]

US military requirements and tests for Normal LSt are given after the spec requirements and tests for Basic LSt Refs 1) Beil 6, 830, (405), [825] 4354 ... [Pg.174]

US Military requirements and test for Normal LSt for use in priming compositions are described in US Military Specification MIL-L-757A(1967) Amendment 1(1968)... [Pg.177]

US Military requirements for UDMH are discussed in Ref 18. They are as follows ... [Pg.238]

US Military requirements for DOS are covered by Spec MlL-D-10692(Ord)(1954), entitled Di(2-ethylhexyl) sehacate (without mentioning that the compd is identical with commonly used... [Pg.296]

Fill a cell with this soln and a similar cell with ethanol. Set the instrument at 430 millimicrons and det the absorbency of cell contg the proplnt soln in relation to reference and calc the percentage of 2-NDPhA in the proplnt LTS Military requirements and tests for 2-Nltrodiphenylamine intended for use in the manuf... [Pg.323]

Its higher nitrated compds are powerful expls (see below). Military requirements of aniline are discussed in US Spec MIL-A-... [Pg.406]

US military requirements for As metal intended for use in the manuf of Mg arsenide are covered by spec MIL-A-10852B... [Pg.490]

US military requirements for crude asbestos are given in specification MIL-A-13651 and for asbestos sheet, compressed, MIL-A-7021A... [Pg.494]

US Military requirements and tests for colloidal LA (called also Type II) are given in Ref 19. The tests are essentially the same as for DLA (Type I) (See item VII under Lead Azide, Plant Analytical Procedures), except the particle size detn... [Pg.558]

Detonating cords US military requirements and testing 3 D104—D107... [Pg.539]

Ethyldiethanolamine and derivs 6 E225—E226 US military requirements and tests... [Pg.605]

US military requirements for Bentonite are covered by Specifications MIL-B-12208A(CE) and MIL-B-10456A(CmlC)... [Pg.34]

US military requirements and tests for cotton intended for manuf of NC are as follows (Ref 7) a)The material shall be bleached... [Pg.494]

US military requirements and tests for wood pulp(sulfite) intended for manuf of NC are as follows(Ref 8) a)The material shall be bleached sulfite pulp from coniferous wood which has been washed to remove the purifying chemicals and formed into sheets or laps suitable for fluffing or shredding and subsequent nitration. [Pg.494]

US military requirements and tests for regenerated cellulose in strips ca 0.5 wide and ca 0.006 thick for use in primer vent seals for small arms ammo are described in Ref 9... [Pg.495]

US military requirements and tests for cellulose acetate, cellulose acetate butyrate and ethylcellulose are given in Refs 10, 11 12. There is n o USmilitarv specification for methylcellulose... [Pg.495]


See other pages where Military requirement is mentioned: [Pg.246]    [Pg.356]    [Pg.380]    [Pg.125]    [Pg.735]    [Pg.225]    [Pg.7]    [Pg.312]    [Pg.39]    [Pg.130]    [Pg.171]    [Pg.175]    [Pg.292]    [Pg.458]    [Pg.469]    [Pg.477]    [Pg.605]    [Pg.21]   
See also in sourсe #XX -- [ Pg.482 ]




SEARCH



Additional Requirements for Military Explosives

Ammonium Nitrate, US Military Specification Requirements and Tests

Military Standard—System Safety Program Requirements, MIL-STD

Military additional requirements

Rechargeable Battery Requirements for Military Space-Based Sensors Requiring Moderate Power Levels

US Military Requirements for Composition

© 2024 chempedia.info