Micellar electrokinetic chromatography technique using

The effects of pH on electrokinetic velocities in micellar electrokinetic chromatography was studied by using sodium dodecyl sulfate solutions [179]. Micellar electrokinetic capillary chromatography with a sodium dodecyl sulfate pseudostationary phase has been used to determine the partition constants for nitrophenols, thiazolylazo dyes, and metal chelate compounds [180]. A similar technique was used to separate hydroquinone and some of its ether derivatives. This analysis is suitable for the determination of hydroquinone in skin-toning creams [181]. The ingredients of antipyretic analgesic preparations have also been determined by this technique [182], The addition of sodium dodecyl sulfate improves the peak shapes and resolution in chiral separations by micellar electrokinetic chromatography [183]. 

CE was recently used for anthocyanin analysis because of its excellent resolution. This technique has different modes capillary zone electrophoresis (CZE), capillary gel electrophoresis (CGE), micellar electrokinetic chromatography (MEKC), capillary electrochromatography (CEC), capillary isoelectric focusing (CIEE), and capillary isotachophoresis (CITP)."° CZE is the most popular method for anthocyanin... 

Koezuka, K., Ozaki, H., Matsubara, N., and Terabe, S. (1997). Separation and detection of closely related peptides by micellar electrokinetic chromatography coupled with electrospray ionization mass spectrometry using the partial filling technique.. Chromatogr. B 689, 3—11. 

Pluym et al. compared the use of CE to that of HPLC in chemical and pharmaceutical quality control. They stated that CE could be considered as a complementary technique to HPLC because of its large separation capacity, its simplicity, and its economical benefits. Jimidar et al. decided that CE offers high separation efficiency and can be applied as an adjunct in HPLC method validation. Mol et al. evaluated the use of micellar electrokinetic chromatography (MEKC) coupled with electrospray ionization mass spectrometry (ESI—MS) in impurity profiling of drugs, which resulted in efficient separations. 

Capillary electrophoresis (CE) coupled to MS has the advantage of high resolution and soft ionization for biomolecules, which may be used to differentiate post-translational modifications and variants of intact proteins and oligonucleotides. Different modes of CE (capillary zone electrophoresis, capillary isoelectric focusing, capillary electrochromatography, micellar electrokinetic chromatography, nonaqueous capillary electrophoresis) to MS as well as online preconcentration techniques (transient capillary isotachophoresis, solid-phase extraction, membrane preconcentration) are used to compensate for the restricted detection sensitivity of the CE methodology [77, 78]. 

Capillary electrochromatography (CEC) is a rapidly emerging technique that adds a new dimension to current separation science. The major "news" in this method is that the hydrodynamic flow of the eluting liquid, which is typical of HPLC, is replaced by a flow driven by electro-endoosmosis. This increases considerably the selection of available separation mechanisms. For example, combinations of traditional processes such as reversed-phase- or ion-exchange- separations with electromigration techniques are now possible. Also, CEC is opening new horizons in the separation of non-polar compounds, and thus represents an alternative to the widely used micellar electrokinetic chromatography. 

Capillary electrophoresis is a general term that is used to describe a number of different separation techniques. Capillary zone electrophoresis (CZE) is the classic technique and is therefore usually referred to as just CE. Other techniques include micellar electrokinetic chromatography (MEKC), capillary isoelectric focusing, and capillary isotachophoresis. CZE and MEKC are the predominant techniques and are those used herein, so only they will be discussed in detail here. 

The FITC labeling method was also applied to chiral separations of amino acids on a microchip to determine the enantiomeric ratios of amino acids found on a meteorite [27], Since biotic amino acids are normally single enantiomers, chiral separations of amino acids are not truly clinical in nature, but illustrate the potential for chiral separations of small molecules of clinical interest. Ma-thies and co-workers used this technique to search for evidence of life in extraterrestrial environments. Enantiomeric forms of Val, Ala, Glu, and Asp could be discriminated by addition of a-, (3-, or y-cyclodextrin (CD) to the run buffer. Improved resolution with faster separations was found with respect to conventional CE. This method has been modified, by addition of SDS to the buffer, to perform cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) [28]. Increasing the SDS concentration decreased the magnitude of elec-troosmotic flow (EOF), increasing the effective migration distance, and therefore the resolution on the microchips. 

CRM for road dust (BCR-723) containing 81.3 2.5 Jg/kg Pt, 6.1 1.9 ig/ kg Pd, and 12.8 1.3 Jg/kg Rh, was introduced [49, 228]. It is widely used for quality control of results obtained in the analysis of environmental materials (e.g., airborne particulate matters, dusts, soils, and sediments). Comparison of results obtained using different analytical procedures and interlaboratory studies are recommended when there is a lack of suitable CRM (e.g., in examination of clinical samples). The use of standards based on real matrices (e.g., saliva, plasma, ultrafiltrates, and lung fluids) instead of synthetic solutions is recommended in such analyses. Difficulties with the identification and quantification of different metal species in examined samples make the reliability of results of great importance. The use of various instrumental techniques for examination of particular samples can be helpful. The application of chromatography, mass spectrometry, and electrochemistry [199] HPLC ICP MS and HPLC MS/MS [156] ESI MS and MALDI [162] micellar electrokinetic chromatography, NMR, and MS [167] AAS, ESI MS, and CD spectroscopy [179] SEC IC ICP MS and EC ESI MS [180] and NMR and HPLC [229] are examples of such approaches. 

The majority of enantioseparations are performed by pressure-driven liquid chromatography. However, in the last decade other liquid-phase separation techniques have evolved and demonstrated their usefulness for enantioseparations, including supercritical fluid chromatography (SFC), capillary electrophoresis (CE), micellar electrokinetic chromatography (MEKC), and open-tubular and packed-bed electrochromatography (OT-EC and CEC). 

It is a detergent and wetting agent effective in both alkaline and acidic conditions. In recent years it has found application in analytical electrophoretic techniques SDS (sodium dodecyl sulfate) polyacrylamide gel electrophoresis is one of the more widely used techniques for the analysis of proteins and sodium lauryl sulfate has been used to enhance the selectivity of micellar electrokinetic chromatography (MEKC). ... 

The technique is therefore particularly suited to water-soluble species which possess a charge, which includes most dyes. Variations from the main technique (often referred to as capillary zone electrophoresis, CZE) do exist and these include the use of surfactants in the buffer to create micelles (often thought of as creating a pseudo-stationary phase inside the capillary) which then improve the separation of neutral species (and frequently charged molecules) owing to hydrophobic interactions. The term micellar electrokinetic chromatography (MECC or MEKC) is often used for CE separations carried out with the aid of a micellar buffer solution. 

Capillary electrophoresis (CE) is a powerful separation technique. It is especially useful for separation of ionic compounds and chiral mixtures. Mass spectrometry has been coupled with CE to provide a powerful platform for separation and detection of complex mixtures such as combinatorial libraries. However, the full potential of CE in the application of routine analysis of samples has yet to be realized. This is in part due to perceived difficulty in the use of the CE technique compared to the more mature techniques of HPLC and even SFC. Dunayevskiy et al. [136] analyzed a library of 171 theoretically disubstituted xanthene derivatives with a CE/ESI-MS system. The method allowed the purity and makeup of the library to be determined 160 of the expected compounds were found to be present, and 12 side products were also detected in the mixture. Due to the ability of CE to separate analytes on the basis of charge, most of the xanthene derivatives could be resolved by simple CE-MS procedures even though 124 of the 171 theoretical compounds were isobaric with at least one other molecule in the mixture. Any remaining unresolved peaks were resolved by MS/MS experiments. The method shows promise for the analysis of small combinatorial libraries with fewer than 1000 components. Boutin et al. [137] used CE-MS along with NMR and MS/MS to characterize combinatorial peptide libraries that contain 3 variable positions. The CE-MS method was used to provide a rapid and routine method for initial assessment of the construction of the library. Simms et al. [138] developed a micellar electrokinetic chromatography method for the analysis of combinatorial libraries with an open-tube capillary and UV detection. The quick analysis time of the method made it suitable for the analysis of combinatorial library samples. CE-MS was also used in the analysis... 

---