Methanol manufacture, current energy

Figure 8. Current energy consumptions for methanol manufacture by various syngas production...

The appeal of an acetic acid process, based on ethane oxidation, lies mostly in the absence of the need for the energy demanding step for syngas production. On the other hand, it has to compete not only with the well established methanol carbonylation (Section 4.2), but also with the current utilization of ethane in steam crackers for ethylene manufacture. In fact, ethane feedstock becomes attractive for acetic acid production if it is locally abundant and can be supplied at minimal cost, e.g., in a petrochemical complex close to a large gas field. The construction of a semi-commercial plant of 30 kt/a in the Persian Gulf region has been announced. 

Fatty acid esters of mono- and polyfunctional alcohols are the workhorses of oleochemistry. In many fields of application fatty acid methyl esters replace fatty adds because they are less corrosive. Chemical reactions can often be carried out under milder conditions. They have lower boiling points and require less energy to distil and to fractionate than the corresponding fatty acids. The elimination of methanol from the reaction products can be more easily achieved than that of water. Therefore fatty acid methyl esters are primarily used for the production of saturated and unsaturated fatty alcohols. Methyl esters are manufactured by acid catalyzed esterification of fatty acids in counter-current reaction columns or by alkaline transesterification starting directly from the triglyceride oils in a batch, semi-batch or continuous process (Figure 9.1.37> ° ° ... 

Linked to this problem of cost is the energy leqnired to manufacture sodium borohydride. Using current methods this far exceeds the leqnirements of compounds snch as methanol. Currently sodium borohydride is made from borax (Na0-2B203-10H20), a naturally occurring mineral with many nses that is mined in large quantities, and... 

---