Metathesis polymerization catalysts

Liaw et al. (3) prepared polynorborene macroinitiators, (III), using the ruthenium-based ring-opening metathesis polymerization catalyst, Cl2Ru(=CHC6H5)[P(C6Hn)3]. 

Monomers, (IV), which were crosslinkable using free radical polymerization with azoisobutyronitrile or with ring-opening metathesis polymerization catalyst, C12Ru(=CHC6H5)[P(C6H11)3] were prepared by Liaw et al. (4) and used in thermosets. 

The structure for the step 1 ring-opening metathesis polymerization catalyst, (I), is illustrated below. 

Mechanistic studies of the rearrangement activity of the ring-opening metathesis polymerization catalyst [Ru(H20)6]2+ were reported for unfunctionalized alkenes (112). The mechanism was found to be intermolecular, the alkene isomerization proceeding through an addition-elimination mechanism with a metal hydride catalytic species. This interpretation was... 

When well-defined, less Lewis-acidic metathesis polymerization catalysts are used to polymerize COT, a lower level of detectable sp defects are formed. Also, although the polyacetylene produced is still insoluble, the reaction proceeds slowly enough to allow manipulation of the liquid reaction solution before hardening. In this way, one can obtain films in a desired shape and location, e.g., on a semiconductor [123]. This procedure was found to result in better electrical contact than can be obtained when a free-standing film prepared via the Shirakawa route is simply pressed against an electrode. 

Xia Y, Boydston AJ, Yao Y, et al. Ring-expansion metathesis polymerization catalyst-dependent polymerization profiles. J Am Chem Soc. 2009 131 2670-2677. 

Jan, D., Delaude, L., Simal, F., Demonceau, A., Noels, A.F., Synthesis and evaluation of new RuCl2(p-cymene)(ER2R ) and (t r -phosphinoarene) RuCU complexes as ring-opening metathesis polymerization catalysts, J. Organomet. Chem. 2000,606 55-64. 

The production of CPO is based on relatively inexpensive cycHc substances these must be derivatized, however, to meet the requirements of resistance to heat softening and suitabiUty for metallization. Metathesis polymerization is problem-prone, since relatively large amounts of catalyst (WCl, C2H AlCl2) must be removed by solvent extraction (216). In the process, the price of CPO, at small batches, is several times higher than that of BPA-PC. 

Aqueous ring-opening metathesis polymerization (ROMP) was first described in 1989 (90) and it has been appHed to maleic anhydride (91). Furan [110-00-9] reacts in a Diels-Alder reaction with maleic anhydride to give exo-7-oxabicyclo[2.2.1]hept-5-ene-2,3—dicarboxylate anhydride [6118-51 -0] (24). The condensed product is treated with a soluble mthenium(Ill) [7440-18-8] catalyst in water to give upon acidification the polymer (25). Several apphcations for this new copolymer have been suggested (91). 

Poly(dicyclopentadiene). The development of polydicyclopentadiene [25038-78-2] for reaction injection molding is an area which has generated much interest. The polyDCPD is obtained via metathesis polymerization of high purity (usually greater than 98%) DCPD. Excellent reviews (61—62) of the chemistry and properties of polyDCPD have been pubHshed. The patent Hterature of polyDCPD synthesis, catalysts, modifiers, and appHcations is dominated by Hercules (44 patents) and B. F. Goodrich (43 patents) in the U.S. Other participants are Orkem, SheU, Nippon Zeon, and Teijin. 

When a mixture of alkenes 1 and 2 or an unsymmetrically substituted alkene 3 is treated with an appropriate transition-metal catalyst, a mixture of products (including fi/Z-isomers) from apparent interchange of alkylidene moieties is obtained by a process called alkene metathesis. With the development of new catalysts in recent years, alkene metathesis has become a useful synthetic method. Special synthetic applications are, for example, ring-closing metathesis (RCM) and ring-opening metathesis polymerization (ROM) (see below). 

Ring-opening metathesis polymerization (ROMP) of 1,4-cyelooctadiene was used to prepare poly(l,4-B) terminated with halo end groups.647 This was then used as a macroinitiator of ATRP with heterogeneous Cu bpy catalysts to form PS- >/ti /r-poly(l,4-B)-WoeA -PS and PMMA-Moc.T-poly(l,4-B)-Wof A-PMMA. 

These limitations were overcome with the introduction of the well-defined, single-component tungsten and molybdenum (14) alkylidenes in 1990. (Fig. 8.4).7 Schrock s discoveiy revolutionized the metathesis field and vastly increased die utility of this reaction. The Schrock alkylidenes are particularly reactive species, have no side reactions, and are quite effective as polymerization catalysts for both ROMP and ADMET. Due to the oxophilicity of molybdenum, these alkylidenes are moisture and air sensitive, so all reactions using these catalysts must be performed under anaerobic conditions, requiring Schlenk and/or glovebox techniques. 

Wolfe and Wagener have developed main-chain boronate polymers (59) (Fig. 38) by the acyclic diene metathesis (ADMET) polymerization of symmetrical ,oj-dienes, containing both methyl- and phenyl-substituted boronate functionalities using Mo and Ru catalysts.84 The ring-opening metathesis polymerization (ROMP) of several norbornene monomers containing methyl- and phenyl-substituted boronates into... 

In this chapter I will cover only well-defined or well-characterized compounds. Results will be included that have appeared since reviews in 1991 on alkylidene and metalacyclobutane complexes [41] and in 1993 on ring-opening metathesis polymerization [30], but an overview of prior results that are especially relevant to olefin metathesis in particular will also be included. (An excellent and comprehensive text also has been published recently [1].) The terms well-defined or well-characterized originally were meant to imply that the alkylidene complex is isolable and is essentially identical to that in a catalytic reaction except for the identity of the alkylidene. These terms have been watered down from time to time in the literature, even to the point where they are used to describe a catalyst that is formed from a well-characterized transition metal precursor complex, but whose identity actually is not known. In this article I... 

Poly(l,4-naphthylenevinylenes) have been prepared by metathesis polymerization of benzobarrelenes [181,182] and the photoluminescence properties of homopolymers and block-copolymers have been studied in some detail [183]. PPV also has been prepared via ROMP of [2.2]paracyclophane-l,9-diene [184] and ROMP of a paracyclophene that contains a solubilizing leaving group [185]. The resulting polymer is converted to PPV upon acid catalysis at room temperature. ADMET of 2,5-dialkyl-l,4-divinylbenzenes using Mo or W catalysts has... 

It has been shown that [(r]6-arene)RuCl2]2 6 and [(r 6-arene)RuCl2] PR3 7 complexes can be activated in situ to afford active metathesis catalysts, either on treatment with diazoalkanes [15] or by UV irradiation [16]. The structure of the active species thus formed is unknown, but it initiates the ring opening metathesis polymerization reactions (ROMP) of various cycloalkenes very efficiently. Therefore these in situ recipes may also be useful in the context of preparative organic chemistry. 

K. Nomura, H. Morimoto, Y. Imanishi, Z. Ramhani, and Y. Geerts, Synthesis of high molecular weight rra i-poly(9,9-di- -octylfluorene-2,7-vinylene) by the acyclic diene metathesis polymerization using molybdenum catalysts, J. Polym. Sci., Part A Polym. Chem., 39 2463-2470, 2001. 

Multiphase homogeneous catalysis (continued) hydroformylation, 42 483-487, 498 hydrogenations, 42 488-491 metal salts as catalysis, 42 482-487 neutral ligands, 42 481 82 organic reactions, 42 495 0X0 synthesis, 42 483-487 ring-opening metathesis polymerization and isomerization, 42 492-494 telomerizations, 42 491-492 diols as catalyst phase, 42 496 fluorinated compounds as catalyst phase, 42 497... 

---