Metal-matrix composites chromium

The composition of the codeposition bath is defined not only by the concentration and type of electrolyte used for depositing the matrix metal, but also by the particle loading in suspension, the pH, the temperature, and the additives used. A variety of electrolytes have been used for the electrocodeposition process including simple metal sulfate or acidic metal sulfate baths to form a metal matrix of copper, iron, nickel, cobalt, or chromium, or their alloys. Deposition of a nickel matrix has also been conducted using a Watts bath which consists of nickel sulfate, nickel chloride and boric acid, and electrolyte baths based on nickel fluoborate or nickel sulfamate. Although many of the bath chemistries used provide high current efficiency, the effect of hydrogen evolution on electrocodeposition is not discussed in the literature. 

Nickel hydroxides, 17 111 Nickel—iron alloys, 17 101 Nickel—iron—aluminum catalyst, 17 121 Nickel—iron cells, 3 491—493 Nickel—iron—chromium alloy 825 in galvanic series, 7 805t Nickel—iron—chromium alloys, 17 102—103 Nickel—iron plating, 9 821 Nickel itch, 12 691, 701 Nickel—matrix composites, 17 104 Nickel metal, forms of, 17 95—99 Nickel metal hydride cells, 3 431, 471, 509-512... 

First, a few studies on metal-filled composite bipolar plates are briefly described. At Los Alamos National Laboratory (LANL) composite bipolar plates filled with porous graphite and stainless steel and bonded with polycarbonate (Hermann, 2005) has been developed. Kuo (2006) investigated in composite bipolar plates based on austenitic chromium-nickel-steel (SS316L) incorporated in a matrix of PA 6. Their results showed that these bipolar plates are chemically stable. Furthermore, Bin et al. (2006) reported a metal-filled bipolar plate using polyvinylidene fluorid (PVDF) as the matrix and titanium silicon carbide (TijSiCj) as the conductive filler and obtained an electrical conductivity of 29 S cm" with 80 wt% filling content. 

Many metals are naturally brittle at room temperature, so must be machined when hot. However, particles of these metals, such as tungsten, chromium, molybdenum, etc., can be suspended in a ductile matrix. The resulting composite material is ductile, yet has the elevated-temperature properties of the brittle constituents. The actual process used to suspend the brittle particles is called liquid sintering and involves infiltration of the matrix material around the brittle particles. Fortunately, In the liquid sintering process, the brittle particles become rounded and therefore naturally more ductile. 

The bulk analysis of /3-SiC whiskers shows the least variation in chemistry. In some whiskers, the residual metals content can vary, most likely, as a result of additives that used as catalysts during synthesis. These include iron, cobalt, and chromium. Studies by Karasek et al. [56] have shown that the physical properties of silicon carbide whisker-reinforced composites do not correlate to the bulk properties of the whiskers significantly. This lack of significant correlation is mainly due to the fact that the important phase chemistry of the whisker-matrix interface is controlled by the matrix chemistry and the surface chemistry of the whiskers. There seems to be little impact of the diffusion of materials into or out of the bulk whisker material. 

If the composite coating would be defined as the combinadOTi film of two or more substances, it would be incorporated into the category of an alloy film. In this chapter, however, we would like to restrict the composite film as a dispersitMi type film in a matrix as shown in Fig. 9 schematically [5], As an example, we have already mentioned (in chapter What Is Environmentally Friendly Surface Finishing ), a silane based film with some dispersed nano-metallic powders. However, other systems have been proposed for the hexavalent chromium ion free process. 

Metallic particles such as chromium can be introduced into a metal plating electrolyte (for example, nickel and cobalt), and the deposited composite can be subsequently heat treated to form high-temperature oxidation-resistant alloys. MCrAlY composites have been made by depositing 10 p,m CrAlY powder in a cobalt or nickel matrix. Heat treatment bonds... 

---