Mesoporous carbon materials template

Mesoporous carbon materials were prepared using ordered silica templates. The Pt catalysts supported on mesoporous carbons were prepared by an impregnation method for use in the methanol electro-oxidation. The Pt/MC catalysts retained highly dispersed Pt particles on the supports. In the methanol electro-oxidation, the Pt/MC catalysts exhibited better catalytic performance than the Pt/Vulcan catalyst. The enhanced catalytic performance of Pt/MC catalysts resulted from large active metal surface areas. The catalytic performance was in the following order Pt/CMK-1 > Pt/CMK-3 > Pt/Vulcan. It was also revealed that CMK-1 with 3-dimensional pore structure was more favorable for metal dispersion than CMK-3 with 2-dimensional pore arrangement. It is eoncluded that the metal dispersion was a critical factor determining the catalytic performance in the methanol electro-oxidation. 

Ordered Mesoporous Carbons The first ordered mesoporous carbons were synthesized by hard templating methods (141). The use of porous inorganic silica templates allowed the preparation of series of ordered mesoporous carbon materials, designated as CMK-x materials (carbon molecular sieves Korean Advanced Institute of Science and Technology). The hrst one, CMK-1, was prepared using MCM-48 as a template and sucrose as the carbon source impregnated in the... 

Several reviews covering the synthesis, properties and applications of porous carbons, especially mesoporous carbon materials, can be found in the literature. In this chapter, we summarise the recent developments in the synthesis and characterisation of templated porous carbon materials. Particular attention is paid to the synthesis of structurally ordered porous carbon materials with narrow pore size distribution via both hard and soft template methods. We especially emphasise those so-called breakthroughs in the preparation of porous carbon materials. The chapter is divided into three sections according to the pore size of carbon materials we first consider the synthesis of microporous carbon materials using zeolites and clays as hard template, then summarise the preparation of mesoporous carbon materials via both hard template and self-assembly... 

The morphology of ordered mesostructured carbons is another important factor with respect to their practical applications. Various macroscopic morphologies are required, for example, films (in sensor, separation and optical applications), uniformly sized spheres (in chromatography) or transparent monoliths. Using suitable synthesis strategies, it is possible to control the external shape of the templated mesoporous carbon materials to generate powders, films and membranes, spheres, hollow spheres, rods, fibres, nanowires, nanotubes and monoliths. 

Figure 4.12 SEM images of mesoporous carbon materials nanocast via CVD at 950 °C using mesoporous silica SBA-15 rods synthesised at different temperatures as templates. SBA-15 template synthesised at (a) 40 °C and (b) 100 Reprinted...

The preparation of mesoporous carbon materials with ordered open-pore structures by the supramolecular-templating approach is extremely difficult in solution and remains challenging, owing to the intrinsic characters of organic molecules and the high formation energy of C—C bonds. 

At the end of the 1990, the preparation of mesoporous carbon materials using mesoporous silicas as hard templates has been reported (for reviews see, e.g., [162,... 

Degussa Ti02 (commercially known as P25) with particle sizes in the range of 20 to 30 nm can also be used as a template to prepare mesoporous carbon materials [232], Figure 2.31 shows the adsorption-desorption isotherms and BJH-PSD curves of the carbons prepared by using P25 templates. The sample prepared in... 

Figure 17 Illustration of the supposed hydrogen-bonded layer of constitutional isomers of diethynylpyridines on the snrface of mesoporous silica, which is used as a template for the formation of mesoporous carbon materials from these molecnles.

Nowadays synthesis of mesoporous materials with zeolite character has been suggested to overcome the problems of week catalytic activity and poor hydrothermal stability of highly silicious materials. So different approaches for the synthesis of this new generation of bimodal porous materials have been described in the literature like dealumination [4] or desilication [5], use of various carbon forms as templates like carbon black, carbon aerosols, mesoporous carbon or carbon replicas [6] have been applied. These mesoporous zeolites potentially improve the efficiency of zeolitic catalysis via increase in external surface area, accessibility of large molecules due to the mesoporosity and hydrothermal stability due to zeolitic crystalline walls. During past few years various research groups emphasized the importance of the synthesis of siliceous materials with micro- and mesoporosity [7-9]. Microwave synthesis had... 

---