Melting transition temperature crystallinity, effects

The effects of cholesterol on phospholipid dispersions in water have been studied by a variety of biophysical techniques. These have created an understanding of the cholesterol condensation eff t in molecular terms. Such studies have been made above and below the main phosphohpid melting transition temperature (7 ) at which the phosphohpid changes from the l-)8 gel phase to the L-a hquid-crystalline phase. 

To erase information by the transition amorphous — crystalline, the amorphous phase of the selected area must be crystallized by annealing. This is effected by illumination with a low power laser beam (6—15 mW, compared to 15—50 mW for writing/melting), thus crystallizing the area. This crystallization temperature is above the glass-transition point, but below the melting point of the material concerned (Eig. 15, Erase). 

Since successful commercialization of Kapton by Du Pont Company in the 1960s (10), numerous compositions of polyimide and various new methods of syntheses have been described in the Hterature (1—5). A successful result for each method depends on the nature of the chemical components involved in the system, including monomers, intermediates, solvents, and the polyimide products, as well as on physical conditions during the synthesis. Properties such as monomer reactivity and solubiHty, and the glass-transition temperature,T, crystallinity, T, and melt viscosity of the polyimide products ultimately determine the effectiveness of each process. Accordingly, proper selection of synthetic method is often critical for preparation of polyimides of a given chemical composition. 

Features of chemical structure that affect the degree of molecular freedom influence both the crystalline melting point and the glass transition temperature. Moreover, such features have roughly similar effects on both properties, so that the empirical rule has been found that for many polymers ... 

Liquid crystalline solutions as such have not yet found any commercial uses, but highly orientated liquid crystal polymer films are used to store information. The liquid crystal melt is held between two conductive glass plates and the side chains are oriented by an electric field to produce a transparent film. The electric field is turned off and the information inscribed on to the film using a laser. The laser has the effect of heating selected areas of the film above the nematic-isotropic transition temperature. These areas thus become isotropic and scatter light when the film is viewed. Such images remain stable below the glass transition temperature of the polymer. 

These relationships are represented in an exaggerated manner in fig. 2. The lines AO, BC and OD represent the vapour pressures of sulphur I., sulphur II. and molten sulphur, respectively OE and CF show the effect of pressure change on the melting-points of the two crystalline forms, whilst the effect of pressure on the transition temperature is indicated by BF. 

Mixtures of poly(vinylidene fluoride) with poly (methyl methacrylate) and with poly (ethyl methacrylate) form compatible blends. As evidence of compatibility, single glass transition temperatures are observed for the mixtures, and transparency is observed over a broad range of composition. These criteria, in combination, are acceptable evidence for true molecular intermixing (1, 19). These systems are particularly interesting in view of Bohns (1) review, in which he concludes that a compatible mixture of one crystalline polymer with any other polymer is unlikely except in the remotely possible case of mixed crystal formation. In the present case, the crystalline PVdF is effectively dissolved into the amorphous methacrylate polymer melt, and the dissolved, now amorphous, PVdF behaves as a plasticizer for the glassy methacrylate polymers. 

---