Melting transition temperature copolymers

This type of adhesive is generally useful in the temperature range where the material is either leathery or mbbery, ie, between the glass-transition temperature and the melt temperature. Hot-melt adhesives are based on thermoplastic polymers that may be compounded or uncompounded ethylene—vinyl acetate copolymers, paraffin waxes, polypropylene, phenoxy resins, styrene—butadiene copolymers, ethylene—ethyl acrylate copolymers, and low, and low density polypropylene are used in the compounded state polyesters, polyamides, and polyurethanes are used in the mosdy uncompounded state. 

In the 1960s materials became available which are said to have been obtained by chlorination at lower temperatures. In one process the reaction is carried out photochemically in aqueous dispersion in the presence of a swelling agent such as chloroform. At low temperatures and in the presence of excess chlorine the halogen adds to the carbon atom that does not already have an attached chlorine. The product is therefore effectively identical with a hypothetical copolymer of vinyl chloride and symmetrical dichloroethylene. An increase in the amount of post-chlorination increases the melt viscosity and the transition temperature. Typical commercial materials have a chlorine content of about 66-67% (c.f. 56.8% for PVC) with a Tg of about 110% (c.f. approx. 80°C for PVC). 

Because the polymer degrades before melting, polyacrylonitrile is commonly formed into fibers via a wet spinning process. The precursor is actually a copolymer of acrylonitrile and other monomer(s) which are added to control the oxidation rate and lower the glass transition temperature of the material. Common copolymers include vinyl acetate, methyl acrylate, methyl methacrylate, acrylic acid, itaconic acid, and methacrylic acid [1,2]. 

Incorporation of flexible siloxane spacers into side chain or main chain liquid crystalline polymers have been shown to drastically reduce the transition temperatures 255,267,271,272,277) anc[ aiso increase the response time of the resultant systems to the applied thermal, optical or electrical fields 350-353>. In addition, siloxanes also provided elastomeric properties and improved the processibility (solution or melt) of the resulting liquid crystalline copolymers. 

The transition temperatures that are combined in Figure 2 show the disappearance of crystallinity in the copolymers as the Ter and Tm flow together moving away from either homopolymer. This reflects the random distribution of monomer units in these copolymers. If the copolymer reactions had given homopolymer mixtures, there would be two separate crystalline melting temperatures. In addition, the 13C NMR indicates that the copolymer products contain a random distribution of C5 and C8 units and that the resulting double bonds are cis from the C8 monomer and largely trans from the C5 monomer (52). 

---