Melting point, 8, 35-37 acids-bases

Thus, most ionic liquids are formed from cations that do not contain acidic protons. A summary of the applications and properties of ionic liquids may be found in a number of recent review articles [3]. The most common classes of cations are illustrated in Figure 2.1-1, although low melting point salts based on other cations, such as complex poly cationic amines [4] and heterocycle-containing drugs [5], have also been prepared. 

Checking the Purification. The purity of the dry re-crystallised material must now be determined, as it is possible that repeated recrystallisation may be necessary to obtain the pure material. The purity is therefore checked by a melting-point determination, and the recrystallisation must be repeated until a sharp melting-point is obtained. Should the compound have no well-defined melting-point e.g.y the salt of an organic acid or base), it must be analysed for one suitable component element, until its analysis agrees closely with that theoretically required. 

Du Pont s Zenite range of LCPs have been reintroduced. These materials are also LCP polyesters based on HBA copolymers with, it is beheved, various amounts of 4,4 -biphenol, terephthaUc acid, and naphthalene-2,6-dicatboxyhc acid (NDA) as comonomers. Their compositions are thus similar to those of XYDAR with added NDA to further reduce the melting point (235,236). 

The purity of (/-a-phenylethylamine-/-malate is not readily determined by its melting point or specific rotation, but rather by its massive crystalline form and solubility. The acid and neutral /-base-/-acid salts are much more soluble, and usually do not crystallize at all. 

A further approach is used by Bayer with their polyesteramide BAK resins. A film grade, with mechanical and thermal properties similar to those of polyethylene is marketed as BAK 1095. Based on caprolactam, adipic acid and butane diol it may be considered as a nylon 6-co-polyester. An injection moulding grade, BAK 2195, with a higher melting point and faster crystallisation is referred to as a nylon 66-co-polyester and thus presumably based on hexamethylene diamine, adipic acid and butane diol. 

Specialty waxes include polar waxes for more polar adhesive systems. Examples would be castor wax (triglyceride of 12-hydroxy stearic acid) or Paracin wax N- 2 hydroxy ethyl)-12-hydroxy stearamide) which are used in polyester, polyamide, or with high VA EVA copolymer-based systems. Other common polar waxes are maleated polyethylenes, which are used to improve the specific adhesion of polyethylene-based adhesives, and low molecular weight ethylene copolymers with vinyl acetate or acrylic acid, which are used to improve low temperature adhesion. High melting point isotactic polypropylene wax (7 155°C) and highly refined paraffin wax (7,n 83°C) are used where maximum heat resistance is critical. Needless to say, these specialty waxes also command a premium price, ranging from 2 to 5 times that of conventional paraffin wax. 

Chondrodendron polyanthum, 371 Chondrodendron tomentosum, 363, 371, 373, 377, 391 alkaloids, 376 Chondrodine, 363, 364 Chondrofoline, 364, 365 Chrycentrine, 172, 313 Chiysanthemine, 773 Chrysanthemum cineraricefoHum, 773 Chuchuara, 781 Chuehuhuasha, 781 Cicuta virosa, 13 Cinchamidine, 419, 429 Cinchene, 439 Cinchenine, 438, 439, 440 apoCinchenine, 440, 441 Cincholoipon, 438 Cincholoiponic acid, 438, 443 Cinchomeronic acid, 183 Cinchona alkaloid structure, synthesis, 457 Cinchona alkaloids, bactericidal action of some derivatives, 478 centres of asymmetry, 445 constitution, 435 formulae and characters of transformation products, 449, 451 general formula, 443 hydroxydihydro-bases, 448, 452-4 melting-points and specific rotations, 446... 

As normally polymerized, PVF melts between IH5 and 210 °C and contains 12 18% inverted monomer units ft is normally considered a thermoplastic, but because of its instability above its melting point, it cannot be processed by conventional thermoplastic techniques Instead it is generally extruded into films in a solvent swollen (organosol) form and the solvent is subsequently evaporated and recovered Such films can be onented further to achieve specific mechanical properties PVF films are exceptionally weather and radiabon resistant considenng their modest fluonne content PVF is insoluble below 100 °C but, at higher temperatures, it dissolves in polar solvents like amides, ketones, tetramethylene sulfone, and tetramethylurea Resistance to acids and bases at room temperature IS good [1, 29 ... 

The hydrochloride is prepared by dissolving the base in the minimum amount of acetone and adding a solution of hydrochloric acid in ether until the pH is acid. The hydrochloride which has precipitated is filtered off and is recrystallized twice from acetone, melting point 116°C. 

To produce the dihydrochloride, the free base is dissoived in 110 cc of absolute alcohol, 9.6 g of dry hydrochloric acid dissolved In 35 cc of alcohol are added, followed by 2.8 cc of water. The dihydrochloride precipitates. Is centrifuged, washed, and dried at 40°C. It was a solid white material having a melting point of 134°-135°C. 

---