Melt-shear technique

The dispersion of clay platelets (exfoliation and intercalation level of the silicate layers) and surface area of silicate platelets have the potential to alter the rheological behavior of the nanocomposites. In-situ polymerized nano composites exhibit more exfoliated structure than the composites prepared by the melt blending technique. Irrespective of the processing parameter, the nanocomposites show shear thinning behavior at high shear rate (Figure 9.14), whereas the pristine polyamide exhibits Newtonian behavior (i.e., the viscosity remains almost the same). It has also been reported that the polymer nanocomposite possesses higher steady shear viscosity than pristine polyamide at low shear rates. 

Prom a historical point of view, the development of SRPMs started with the in situ production of 1-D-reinforced variants. This occurred mostly with solid phase extrusion forming, and techniques exploiting melt shearing in the solidifying melts [7]. 

TDI isomers, 210 Tear strength tests, 242-243 TEDA. See Triethylene diamine (TEDA) Telechelic oligomers, 456, 457 copolymerization of, 453-454 Telechelics, from polybutadiene, 456-459 TEM technique, 163-164 Temperature, polyamide shear modulus and, 138. See also /3-transition temperature (7)>) Brill temperature Deblocking temperatures //-transition temperature (Ty) Glass transition temperature (7) ) Heat deflection temperature (HDT) Heat distortion temperature (HDT) High-temperature entries Low-temperature entries Melting temperature (Fm) Modulu s - temperature relationship Thermal entries Tensile strength, 3, 242 TEOS. See Tetraethoxysilane (TEOS)... 

Shear viscosity is a measure of the ahihty of one layer of molecules to move over an adjacent layer. Bulk viscosity will be mentioned in Section V.2. Since viscosity usually refers to shear viscosity, the term will he used in this way unless otherwise stated. Recommended techniques for measuring the viscosity of high-temperature melt are given below. Experimental data are available from the database mentioned in Section 1.2. Data on viscosities of slags (7 single component systems, 35 two-component... 

---