Rheology mechanical properties

Wang, X. and Zhang, Q., Effect of hydrotalcite on the thermal stability, mechanical properties, rheology and flame retardance of poly(vinyl chloride), Polym. Int., 53, 698-707, 2004. 

SSE at 255°C / mechanical properties TSE at 260-280°C / IV / SEM / DSC / selective solvent extraction / mechanical properties / rheology extruded at 280°C / DMA / DSC / mechanical properties / SEM / FTIR / optical microscopy TSE at 280°C / DMA / DSC / mechanical properties / Kalfoglou et al., 1995 SEM / FTIR / optical microscopy / use of recycle PET / ternary blends with FIDPE also prepared... 

PA-66 (50-20) / mechanical properties / rheology / SEM / copolymer analysis Fritz et al., 1994... 

Kim and Choi [1996b] have compatibilized blends of Phenoxy resin with PMMA. Compati-bilizing crosslinked copolymer resulted from transreaction between Phenoxy pendent alcohol groups and pendent PMMA ester groups. Compositions of 100-0 parts Phenoxy resin and 0-100 parts PMMA were prepared in an internal mixer at 240°C. The blends were characterized by DSC, FTIR, mechanical properties, rheology, and DMA. 

HDPE (100-0) / LLDPE (0-100) / DCP RI (0-1) internal mixer at 220°C / torque rheometry / mechanical properties / rheology Kurian et al., 1992... 

Polyestercarbonate/PC/ tetrabutylphosphonium hydroxide catalyst TSE or SSE/mechanical properties/rheology/ HDT/haze/effects of different catalysts and catalyst loading/polyestercarbonate derived from lesorcinol-isophthalate-terephthalate Berkstresser et al. 2008... 

EMA-co-GMA/SMA Brabender mixer or TSE/mechanical properties/rheology/morphology/comparison to blend with unfimctionalized EMA Bayamet al. 2001... 

EPDM/SAN/RI TSE/mechanical properties/rheology/FTIR/ comparison of various RIs Hmjak-Murgic et al. 2004 (see also Kratofil et al. 2007)... 

Besides mechanical properties, rheological properties are influenced by molecular weight. The zero viscosity follows a power law for many plastics melts, expressed in Eq. 1.1 ... 

The possibility of a synergistic combination of properties for SPS/nylon blends has been recognized, and, therefore, the structural and physical properties [46] as well as the morphology and mechanical properties [47] of PA 6,6 (nylon 6,6)/SPS blends have been the subject of two research articles. Below is a suimnary of the mechanical properties, rheological properties, moisture response, dimensional stability, USCAR test results, and solvent resistance of SPS/nylon blends that make these blends attractive for some applications, such... 

---