Materials and corrosivity

Materials and corrosion protection These issues are covered in greater detail in System and Equipment. Also, from the hygienic point of view, this issue is growing in importance. Applications with high hygiene requirements are rapidly increasing due ro automation of processes. 

Cabeza, L.F., Roca, J., Noguee, M., Melding H., and Hiebler, S., 2005, Long term immersion corrosion tests on metal-PCM pairs used for latent heat storage in the 24 to 29 8 °C temperature range, Materials and Corrosion 56 33—38. 

H. J. Grabke, Thermodynamics, Mechanisms and Kinetics of Metal Dusting, Materials and Corrosion, 49 303-308 (1998). 

E. Pippel, J. Woltersdorf and R. Schneider, Micromechanisms of Metal Dusting on Fe-base and Ni-base Alloys, Materials and Corrosion, 49 309-316 (1998). 

P. Kritzer, N. Bonkis, E. Dinjus, The Corrosion of Alloy 625 (NiCr22Mo9Nb 2.4856) in High-Temperature, High-Pressure Aqueous Solutions of Phosphonic Acid and Oxygen, Materials and Corrosion, 49, (1998), 1. 

The materials and corrosion are represented as objects whose states are defined in terms of critical parameters along with inerrelationships between the parameters. 

S. Srinivasan, R.D. Kane, Materials and Corrosion Resources on the Internet, 2nd NACE Latin American Corrosion Congress, Rio de Janeiro, Brazil, September 1996. 

Microbiological evidence. The data must be gathered while the corrosion site is still wet. It is important to photograph the initial appearance of the corrosion site soon, while the organisms are still alive. Analysis of biological materials and corrosion products must be done. 

Shipilov, S.A., Catastrophic Failures Due to Environment-Assisted Cracking of Metals Case Histories, in Proceedings of the International Symposium on Environmental Degradation of Materials and Corrosion Control in Metals, M. Elboujdaini, E. Ghali (eds.), The Conference of Metallurgists, COM, METSOC, pp. 225-242, 1999. 

API Standard 950. "Survey of Construction Materials and Corrosion in Sour Water Strippers. Washington, DC American Petroleum Institute, latest revision. 

This guide covers the following materials and corrosion allowance (CA) for process equipment materials for low-temperature services and materials for wear and abrasion resistance. EQUIPMENT DESIGN UFE ... 

Materials and Corrosion Group Manager Materials Quality Services Department Bechtel Corporation... 

Warscheid, T. Krumbein, W. E. (1994). Biodeterioration processes on inorganic materials and means of countermeasures. Materials and Corrosion, 45, 105-13. 

Material and corrosion questions as well as the realization of the necessary high temperatures (possibly nuclear process heat or solar energy) have hindered their application. 

Evaluation of the BEASY program using linear and piecewise linear approaches for the boundary conditions, Materials and Corrosion, Vol. 55, Is. 11,845-852. 

NR Moody, AW Thompson, RE Ricker, GW Was, and RH Jones, Hydrogen effects on materials and corrosion deformation interactions , in Proceedings of the International Conference for Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions (Moran, WY, 2002) TMS, Warrendale, PA, 2003. 

F. Dettenwanger, E. Schumann, J. Rakowski, G. H. Meier, M. Riihle submitted to Materials and Corrosion. 

Materials and Corrosion, Surface Area Protection in Advanced Chemical Engineering], 1952 -53, 386 and 1954- 55, p. 560. F. Ritter, Korrosions-tabellen metallischer Werkstoffe [Corrosion Tables of Metallic Raw Materials], Vienna, 1944. 

---