Manufacturing factor

Hi = Inlet head, or the losses expressed in feet that occur in the suction throat of the pump up to and including the eye of the impeller. These losses would not be registered on a suction pressure gauge. They could be insignificant, or as high as 2 feet. Some pump manufacturers factor them into their new pumps, and others don t. Also, changes occur in maintenance that may alter the Hi. If you don t know the Hi, call it a safety factor of 2 feet. 

Manufacturing factors—secure raw material supply, reliable manufacturing process, availability of engineers and labor, low-cost and trouble-free manufacturing. 

Wu JS, Ho HO, Sheu MT. A statistical design to evaluate the influence of manufacturing factors on the material properties and functionalities of microcrystalline cellulose. Eur ] Pharm Sci 2001 12 417 25. 

In many cases, the quality of the column is dictated by a combination of manufacturing factors such as silica particle size, batch reproducibility, and surface pore size. Chromatographers agree that the additional price of purchasing columns with rigorously controlled characteristics is well worth the cost in terms of time savings and decreased frustration. 

The manufacturing factors that may be affected by the choice of a particular polymorphic form include granulation, milling and compression, stability (particularly for semisolid forms), amount of dose delivered in metered inhalers, crystallization from different solvents at different speeds and temperature, precipitation, concentration or evaporation, crystallization from the melt, grinding and compression, lyophilization, and spray drying. In the manufacturing processing, crystallization is a major problem and it can be avoided by a careful study of polymorphic transition, particularly in supercritical fluids. 

Petmhs, D. 2004. Theoretical relations between manufacture factors of covered yam and coil length of covering components. Materials Science 10 (2), 186-190. 

Manufacturing Factors Which Influence Solid-State Properties... 

In conclusion, the analyses and discussions refer to the conceptual framework, hypothesis, and concepts derived from the literature review to elucidate the significance of entrepreneurs responses and their relationship to the research outcomes. It is concluded emphatically that the SMEs entrepreneurs in manufactoring should focus on performance measurement related to lean manufacturing factors (product quality, process qualify, waste, defects, suppliers, work-in-process, output. 

Under the PAT umbrella, beginning with the raw materials, different tests will be administered. Using the concept of necessary and sufficient, tests will reveal whether a material will produce a satisfactory product. The major difficulty is that most manufacturers do not know what will produce a satisfactory product. The PAT concept is to use tests that reveal where the critical manufacturing factors exist. Since current tests are laboratory based, all in-line or at-line testing are new to the industry. 

Apart from these fundamental restrictions on the choice of materials, the major technological limiting factor for the efficiency of thermogenerators is the quality of electrical and thermal contacts. In the formulae given above, all the contacts are supposed to be ideal, but all the equations should be rewritten taking into account thermal and electrical resistances. When performing such a treatment, the manufacturing factor MF which reflects the quality of the contacts, can be introduced. The output power is defined by ... 

---