Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Lithium -Hexamethylphosphoric triamide

Reducing agents Aluminum hydride. Bis-3-methyl-2-butylborane. n-Butyllithium-Pyridine. Calcium borohydride. Chloroiridic acid. Chromous acetate. Chromous chloride. Chromous sulfate. Copper chromite. Diborane. Diborane-Boron trifluoride. Diborane-Sodium borohydride. Diethyl phosphonate. Diimide. Diisobutylaluminum hydride. Dimethyl sulfide. Hexamethylphosphorous triamide. Iridium tetrachloride. Lead. Lithium alkyla-mines. Lithium aluminum hydride. Lithium aluminum hydride-Aluminum chloride. Lithium-Ammonia. Lithium diisobutylmethylaluminum hydride. Lithium-Diphenyl. Lithium ethylenediamine. Lithium-Hexamethylphosphoric triamide. Lithium hydride. Lithium triethoxyaluminum hydride. Lithium tri-/-butoxyaluminum hydride. Nickel-aluminum alloy. Pyridine-n-Butyllithium. Sodium amalgam. Sodium-Ammonia. Sodium borohydride. Sodium borohydride-BFs, see DDQ. Sodium dihydrobis-(2-methoxyethoxy) aluminate. Sodium hydrosulflte. Sodium telluride. Stannous chloride. Tin-HBr. Tri-n-butyltin hydride. Trimethyl phosphite, see Dinitrogen tetroxide. [Pg.516]

Lithio-1 -trimethylsilylpropyne, 638 Lithium, 274, 351 Lithium-Alkylamines, 322 Lithium-Ammonia, 322-323,463, 502 Lithium-Ethylamine, 12 Lithium-Hexamethylphosphoric triamide, 323... [Pg.377]

The first displacement reaction at C-2 position in carbohydrates was achieved during the study of sulfuryl chloride reaction with sucrose (92). Treatment of 3,4,6,3, 4, 6 -hexa-0-acetylsucrose 2,l -bis(chlorosulfate) with lithium chloride in hexamethylphosphoric triamide at 80°C for 20 h led to the corresponding 2,l -maimo derivative in 73% yield. [Pg.34]

A major part of this precipitate was apparently crystallized hexamethylphosphoric triamide, presumably containing lithium halide. [Pg.109]

GABA HMG-CoA HMPA HT LDA LHMDS LTMP NADH NBH NBS NCS NIS NK NMP PMB PPA RaNi Red-Al RNA SEM SnAt TBAF TBDMS TBS Tf TFA TFP THF TIPS TMEDA TMG TMP TMS Tol-BINAP TTF y-aminobutyric acid hydroxymethylglutaryl coenzyme A hexamethylphosphoric triamide hydroxytryptamine (serotonin) lithium diisopropylamide lithium hexamethyldisilazane lithium 2,2,6,6-tetramethylpiperidine reduced nicotinamide adenine dinucleotide l,3-dibromo-5,5-dimethylhydantoin A-bromosuccinimide A-chlorosuccinimide A-iodosuccinimide neurokinin 1 -methyl-2-pyrrolidinone para-methoxybenzyl polyphosphoric acid Raney Nickel sodium bis(2-methoxyethoxy)aluminum hydride ribonucleic acid 2-(trimethylsilyl)ethoxymethyl nucleophilic substitution on an aromatic ring tetrabutylammonium fluoride tert-butyldimcthyisilyl fert-butyldimethylsilyl trifluoromethanesulfonyl (triflyl) trifluoroacetic acid tri-o-furylphosphine tetrahydrofuran triisopropylsilyl A, N,N ,N -tetramethy lethylenediamine tetramethyl guanidine tetramethylpiperidine trimethylsilyl 2,2 -bis(di-p-tolylphosphino)-l,r-binaphthyl tetrathiafulvalene... [Pg.419]

Reduction of alkynes with sodium in ammonia,147 lithium in low-molecular-weight amines,148 or sodium in hexamethylphosphoric triamide containing /-butanol as a proton source149 leads to the corresponding is-alkene. The reaction is assumed to involve successive electron-transfer and proton-transfer steps. [Pg.295]

This important synthetic problem has been satisfactorily solved with the introduction of lithium dialkylamide bases. Lithium diisopropylamide (LDA, Creger s base ) has already been mentioned for the a-alkylation of acids by means of their dianions1. This method has been further improved through the use of hexamethylphosphoric triamide (HMPA)2 and then extended to the a-alkylation of esters3. Generally, LDA became the most widely used base for the preparation of lactone enolates. In some cases lithium amides of other secondary amines like cyclo-hexylisopropylamine, diethylamine or hexamethyldisilazane have been used. The sodium or potassium salts of the latter have also been used but only as exceptions (vide infra). Other methods for the preparation of y-Iactone enolates. e.g., in a tetrahydrofuran solution of potassium, containing K anions and K+ cations complexed by 18-crown-6, and their alkylation have been successfully demonstrated (yields 80 95 %)4 but they probably cannot compete with the simplicity and proven reliability of the lithium amide method. [Pg.762]

Formation of the enolate from 1-methyl-2-pyrrolidone (a y-lactam) is accomplished by treatment with lithium diethylamide in hexamethylphosphoric triamide/benzene at — 20 °C. Addition of bromomethane or (chloromethyl)benzene then results in good yield of the a-alkylation product15. [Pg.800]

Tricyclic lactams, such as exo- and c r/n-3a,4,7,7a-tetrahydro-4,7-methano-2-phenyl-1 //-isoin-dolc-1,3(2//)-dione (4), have been transformed into their dianions by treatment with slightly more than two equivalents of lithium diisopropylamide in tetrahydrofuran, sometimes with hexamethylphosphoric triamide as cosolvent. Alkylation with iodomethane or the bifunctional 1,4-dibromobutane leads to dialkylated products2. [Pg.813]

The regio- and stereoselective alkylations of a number of bicyclic racemic dioxopiperazines have been reported3. For example, dioxopiperazine 9 is deprotonated by lithium diisopropyl-amide in tetrahydrofuran at — 78 °C to yield a monoanion. Alkylation with iodomethane in the presence of hexamethylphosphoric triamide gives products 10 and 11 in a 81 19 ratio and 75 % yield based on recovered starting material3. [Pg.815]

A camphor-based 3-acyl-2-oxazolidinone has also been used for diastereoselective alkylations66. The A-acylated auxiliary 18 is prepared in three steps from 7,7-dimethyl-2-oxobicy-clo[2.2.1]heptane-l-carboxylic acid (ketopinic acid, 17)67. Deprotonation by lithium diiso-propylamide in tetrahydrofuran at — 78 °C and subsequent alkylation with activated halides [(bromo- or (iodomethyl)benzene, 3-bromo- or 3-iodopropene] furnished moderate to good yields of alkylation products in high diastereomeric ratios (>97 3 by H NMR). With added hexamethylphosphoric triamide the alkylation yields are increased and bromoalkanes also give satisfactory yields. The diastereomeric ratios are, however, much lower (d.r. 70 30 to 85 15)67. [Pg.893]

Thus, starting from the (—)-(S )-a-(methoxymethyl)benzeneethanaminc derived imines at low temperatures, (S )-2-methylcycloalkanones are obtained via the -azaenolates, whereas (R)-configurated products are obtained via the thermodynamically more stable Z-azaenolates by refluxing the anion solutions prior to alkylation. However, a high degree of enantiomeric excess is obtained only under thermodynamic conditions, presumably due to different selectives in the alkylation step (see Table 3). Variation of the base (/ert-butyllithium, lithium diethylamide, lithium 2,2,6,6-tetramethylpiperidide) and additives (hexamethylphosphoric triamide) did not improve the EjZ ratio (enantiomeric excess) significantly9. [Pg.983]

Chiral enamines prepared from /f-oxo esters and the tcrt-butyl ester of (.V)-valine are lithiated by LDA (—78 °C, toluene or THF, 1 h)18 19. Both enantiomers of the alkylation product are obtained with a high degree of diastercoselectivity starting from one auxiliary when the reaction is performed under the addition of different ligands (see Table 6). Addition of one equivalent of hexamethylphosphoric triamide (1IMPA) causes coordination of the lithium atom and alkylation from the top side18. [Pg.987]

The regioselectivity of the latter reaction is strongly dependent on the base used for deprotonation. Thus, reaction with lithium diisopropylamide in tetrahydrofuran/hexamethylphosphoric triamide results in selective endo metalation23 and leads to the bicyclic product 10. [Pg.1033]

Intramolecular cyclization of 6-(mesyloxymethyl)bicyclo[4.4.0]dcc-l-cn-3-one using lithium diiso-propylamide produced almost exclusively the y-alkylation product tricyclo[5.3.1.01,6]undec-5-en-4-one (17), together with a trace amount of the 2-alkylation product tricyclo[5.3.1 016]undec-5-en-8-one (18).17 Surprisingly, the a-alkylation product 18 was the major product when the cyclization was carried out using potassium tert-butoxide.17 The preference for y-alkylation over a-alkylation can be rationalized by the Hammond postulate which favors y-alkylation due to the less reactant-like transition state when lithium diisopropylamide is used. Alternatively, when potassium /ert-butoxide and 18-crown-6 in hexamethylphosphoric triamide is used, the reactivity of the enolate anion is significantly enhanced. As a result, the transition state becomes reactant-like so that a-alkylation is the predominant process.17... [Pg.68]

In agreement with this mechanism, it was found that the epoxide (4RS)-4,4-(epoxy-methano)tricyclo[5.1.0.02,5]octane-e c/o-8-carbaldehyde 2,2-dimethylpropaneT,3-diyl acetal (1) gave 4-oxotricyclo[6.1.0.02,6]nonane- ,/ttreatment with lithium iodide in tetrahydrofuran.71 Several examples employing this oxaspirohexane to cyclopentanone isomerization method are shown (see Table 7).69-80 Lithium bromide in the presence of hexamethylphosphoric triamide was also effective in these transformations.70,74,76 79,80... [Pg.515]

Acceleration of the vinylcyclobutane to cyclohexene rearrangement of vinylcyclobutanols by conversion to the potassium alkoxide was first reported by Wilson and Mao.50 Typically, the [1,3] shift occurs at a satisfactory rate in tetrahydrofuran between room and reflux temperature. Sodium51 or lithium alkoxides52 also rearrange in this temperature range. The reaction rate can be further increased by addition of crown ethers or hexamethylphosphoric triamide.50,53... [Pg.533]

BASF AG CRBPII dba DBN DBU DIBAL-H DMAP DMF DMF-DMA DMPU HMDS HMPA HMPT H-LR LDA LDE LRAT MCPBA MOM NMO NMP PCC PhH = Badische Anilin- Soda Fabrik AG = cellular retinol-binding protein type II r dibenzylideneacetone = 1,5-diazabicyclo[4.3.0]non-5-ene = l,8-diazabicyclo[5.4.0]undec-7-ene = diisobutylaluminium hydride = 4-dimethylaminopyridine = A V-dimethylformamide = A,V-dimethylformamide, dimethylacetal = 1,3 -dimethyl-3,4,5,6-tetrahydro-2( 1H)-pyrimidone = hexamethyldisilazane = hexamethylphosphoramide = hexamethylphosphorous triamide = Hoffmann-La Roche = lithium diisopropylamide = lithium diethylamide = lecithin retinol acyltransferase = m-chloroperbenzoic acid = methoxymethyl = iV-methylmorpholine oxide = l-methyl-2-pyrrolidinone = pyridinium chlorochromate = benzene... [Pg.102]

SPIR0ANNELAT10N Lithium chloride-Hexamethylphosphoric triamide. N-Methyl-N-phenylaminoacetylene. (EE a(Trimethylsilyl)vinyllithium. [Pg.471]


See other pages where Lithium -Hexamethylphosphoric triamide is mentioned: [Pg.323]    [Pg.783]    [Pg.549]    [Pg.729]    [Pg.323]    [Pg.783]    [Pg.549]    [Pg.729]    [Pg.162]    [Pg.349]    [Pg.603]    [Pg.610]    [Pg.63]    [Pg.628]    [Pg.954]    [Pg.103]    [Pg.105]    [Pg.138]    [Pg.364]    [Pg.694]    [Pg.305]    [Pg.140]    [Pg.45]    [Pg.430]    [Pg.589]    [Pg.596]    [Pg.796]    [Pg.831]    [Pg.845]    [Pg.1022]    [Pg.229]    [Pg.74]    [Pg.240]   
See also in sourсe #XX -- [ Pg.323 ]




SEARCH



Bases Lithium diisopropylamide-Hexamethylphosphoric triamide

Hexamethylphosphoric

Hexamethylphosphoric triamide

Hexamethylphosphorous

Lithium aluminum hydride-Hexamethylphosphoric triamide

Lithium bromide-Hexamethylphosphoric triamide

Lithium chloride-Hexamethylphosphoric triamide

Lithium diethylamide-Hexamethylphosphoric triamide

Lithium diisopropylamide-Hexamethylphosphoric triamide

Lithium hexamethylphosphoric triamide (HMPA

Triamide

Triamides

© 2024 chempedia.info