Light shatters

Never view the flame or hollow cathode lamps directly protective eye wear should always be worn. Safety spectacles will usually provide adequate protection from ultraviolet light, and will also provide protection for the eyes in the event of the apparatus being shattered by an explosion. 

Detonation failures in pipe networks are always downstream from the ignition source. They usually occur at pipe elbows or other pipe constrictions, such as valves. Blast pressures can shatter an elbow into many small fragments. A detonation in light-gauge ductwork can tear the duct along seams and can also produce a large amount of structural distortion in the torn ducts. 

Perris, Netherlands 1968 light hydrocarbons from stops tank 2 people killed, 75 injured. Blast shattered windows 1 mile away ( 11M) UVCE... 

Properties Required Good light transmission in transparent or translucent colors. Good to excellent formability and modability. Shatter resistance. Fair to good tensile strength. 

It is recommended that experiments with explosive chemicals not be conducted in the confinement of standard fume cupboards, with shatterable front and side panels, but on the open bench behind anchored polycarbonate blast screens. Even light top cover is found much to increase lateral blast effects. Specially designed laboratories are, of course, much preferable for such experiments. 

Ahead, the ruins scaled the foothills of the Urals in serpentine tiers dark and monolithic, the shattered bones of a city, picked all but clean by war and a succession of savage winters. Just a few eggshell patches lightly silvered by the cloud-filtered moonlight solar panelling, the Doctor supposed, clinging to the exteriors of long-dead homes. 

The absorption of light by certain molecules is sometimes drastically changed when they are adsorbed. This phenomenon undoubtedly has some relation to the nature of the binding forces and one might be inclined to consider it as chemisorption. We shall be compelled in our following discussions to shatter this conception. 

The matching of expansion behavior is of the utmost importance to manufacturers of, for example, multi-layer capacitors, porcelain enameled cast iron sinks, fiber reinforced composites, light bulbs, etc. In all cases, various materials in rigid contact must have their expansion characteristics carefully matched. Inattention to this runs the risk of cracking and shattering of a light bulb at its seal to aluminum, delamination of metallic conductive leads from the ceramic substrate in a hybrid circuit, etc. By changing the composition of a constituent material, its... 

---