Lewis acids catalyst preparation

To overcome this limitation, the vinyl sulfide and selenide were used as the substrates instead of mono- and 1,2-disubstituted olefins [129]. With these substrates, the ene products are formed with almost complete enantioselectivity. The carbonyl-ene adducts have been applied to the synthesis of natural compounds such as (R)-(—)-ipsdienol, an insect aggregation pheromone [130] (Scheme 14.49). For trisubstituted olefin substrates, a more Lewis acidic catalyst prepared from 6,6 -Br2BINOL gave better results [128b, c]. 

The first example of enantioselective catalysis of a Diels-Alder reaction was reported in 1979 . Since then, an extensive set of successful chiral Lewis-acid catalysts has been prepared. Some selected examples will be presented here together with their mechanistic interpretation. For a more complete... 

Pentachlorophenol. Because of the high melting temperature of pentachlorophenol, C HCl O, its preparation makes it necessary to raise the temperature progressively throughout chlorination. The presence of Lewis acid catalysts is essential. The most commonly used of these are AlCl and FeCL. 

The most successful of the Lewis acid catalysts are oxazaborolidines prepared from chiral amino alcohols and boranes. These compounds lead to enantioselective reduction of acetophenone by an external reductant, usually diborane. The chiral environment established in the complex leads to facial selectivity. The most widely known example of these reagents is derived from the amino acid proline. Several other examples of this type of reagent have been developed, and these will be discussed more completely in Section 5.2 of part B. 

The generation of caibocations from these sources is well documented (see Section 5.4). The reaction of aromatics with alkenes in the presence of Lewis acid catalysts is the basis for the industrial production of many alkylated aromatic compounds. Styrene, for example, is prepared by dehydrogenation of ethylbenzene made from benzene and ethylene. 

Chiral aluminum catalyst 2, prepared from Et2AlCl and a Vaulted biaryl ligand, is reported to be an effective Lewis acid catalyst of the Diels-AIder reaction between methacrolein and cyclopentadiene, affording the adduct in 97.7% ee [4] (Scheme 1.2). Although the Diels-AIder reaction with other a,/ -unsaturated aldehydes has not been described, that only 0.5 mol% loading is sufficient to promote the reaction is a great advantage of this catalyst. 

Evans et al. reported that the bis(imine)-copper (II) complex 25, prepared from chiral bis(imine) ligand and Cu(OTf)2, is also an effective chiral Lewis acid catalyst [34] (Scheme 1.44, Table 1.18). By tuning the aryl imine moiety, the bis(2,6-dichlor-ophenylimine) derivative was found to be suitable. Although the endojexo selectivity for 3-alkenoyloxazolidinones is low, significant improvement is achieved with the thiazolidine-2-thione analogs, for which both dienophile reactivity and endojexo selectivity are enhanced. 

The catalytic enantioselective cycloaddition reaction of carbonyl compounds with conjugated dienes has been in intensive development in recent years with the main focus on synthetic aspects the number of mechanistic studies has been limited. This chapter will focus on the development and understanding of cycloaddition reactions of carbonyl compounds with chiral Lewis acid catalysts for the preparation of optically active six-membered ring systems. 

The [ 2 + 4]-cycloaddition reaction of aldehydes and ketones with 1,3-dienes is a well-established synthetic procedure for the preparation of dihydropyrans which are attractive substrates for the synthesis of carbohydrates and other natural products [2]. Carbonyl compounds are usually of limited reactivity in cycloaddition reactions with dienes, because only electron-deficient carbonyl groups, as in glyoxy-lates, chloral, ketomalonate, 1,2,3-triketones, and related compounds, react with dienes which have electron-donating groups. The use of Lewis acids as catalysts for cycloaddition reactions of carbonyl compounds has, however, led to a new era for this class of reactions in synthetic organic chemistry. In particular, the application of chiral Lewis acid catalysts has provided new opportunities for enantioselec-tive cycloadditions of carbonyl compounds. 

While the Friedel-Crafts acylation is a general method for the preparation of aryl ketones, and of wide scope, there is no equivalently versatile reaction for the preparation of aryl aldehydes. There are various formylation procedures known, each of limited scope. In addition to the reactions outlined above, there is the Vdsmeier reaction, the Reimer-Tiemann reaction, and the Rieche formylation reaction The latter is the reaction of aromatic compounds with 1,1-dichloromethyl ether as formylating agent in the presence of a Lewis acid catalyst. This procedure has recently gained much importance. 

The chloromethylated polystyrene resin used for Merrifteld solid-phase peptide synthesis is prepared by treatment of polystyrene with chloromethyl methyl ether and a Lewis acid catalyst. Propose a mechanism for the reaction. 

The pivotal step in this sequence is an electrophilic substitution on indole. Although the use of l,3-dithian-2-yl carbanions is well documented, it has been shown only recently that 1,3-dithian-2-yl carbenium ions can be used in a Priedel-Crafts type reaction. This was accomplished initially using 2-methoxy-l,3-dithiane [1,3-Dithiane, 2-methoxy-] or 2-metlioxy-l,3-dithiolane [1,3-Dithiolane, 2-methoxy-] and titanium tetrachloride [Titanate(l —), tetrachloro-] as the Lewis acid catalyst.9 2-Substituted lysergic acid derivatives and 3-substituted indoles have been prepared under these conditions, but the method is limited in scope by the difficulties of preparing substituted 2-methoxy-1,3-dithianes. l,3-Dithian-2-yl carbenium ions have also been prepared by protonation of ketene dithioacetals with trifluoroacetic acid,10 but this reaction cannot be used to introduce 1,3-dithiane moieties into indole. 

Mohanty et al. were the first to introduce pendent r-butyl groups in die polymer backbones. The resulting material was quite soluble in aprotic dipolar solvents.83 The PEEK precursors were prepared under a mild reaction condition at 170°C. The polymer precursor can be converted to PEEK in die presence of Lewis acid catalyst A1C13 via a retro Friedel-Crafts alkylation. Approximately 50% of die rerr-butyl substitutes were removed due to die insolubility of the product in die solvent used. Later, Risse et al. showed diat complete cleavage of f< rf-butyl substitutes could be achieved using a strong Lewis acid CF3SO3H as both die catalyst and the reaction medium (Scheme 6.15).84... 

The optically active a-sulfinyl vinylphosphonate 122 prepared in two different ways (Scheme 38) is an interesting reagent for asymmetric synthesis [80]. This substrate is an asymmetric dienophile and Michael acceptor [80a]. In the Diels-Alder reaction with cyclopentadiene leading to 123, the endo/exo selectivity and the asymmetry induced by the sulfinyl group have been examined in various experimental conditions. The influence of Lewis acid catalysts (which also increase the dienophilic reactivity) appears to be important. The 1,4-addition of ethanethiol gives 124 with a moderate diastereoselectivity. 

Xenon [ F]difluoride was synthesized by isotopic exchange between XeF2 and H F, Si F4, or As F, and F-2DFG was prepared - by the action of this reagent on tri-O-acetyl-D-glucal (61). In this reaction, the combination of ethyl ether (as the solvent) and BFj (as the Lewis acid catalyst) was found to give the best result. ... 

For preparative reactions, Lewis acid catalysts are used. Zinc chloride or ferric chloride can be used in chlorination, and metallic iron, which generates ferric bromide, is often used in bromination. The Lewis acid facilitates cleavage of the halogen-halogen bond. 

The third cycloaddition substrate explored the feasibility of a vinyl nitro functionality as an activated dipolarophile (98, Scheme 1.9c). Preparation of nitroalkene oxidopyridinium betaine 98 began with silylenol ether 92, which was treated with methoxydioxolane in the presence of Lewis acid catalyst, TrC104, to afford keto dioxolane 93 in 58 % yield [47]. Ketone 93 then underwent a-nitration by treatment with /-BuONCL and KOt-Bu to provide nitro ketone 84 (91 %), which was then converted to the nitroalkene functionality via reduction under Luche conditions to... 

Other electrophilic substitution reactions on aromatic and heteroaromatic systems are summarized in Scheme 6.143. Friedel-Crafts alkylation of N,N-dimethyl-aniline with squaric acid dichloride was accomplished by heating the two components in dichloromethane at 120 °C in the absence of a Lewis acid catalyst to provide a 23% yield of the 2-aryl-l-chlorocydobut-l-ene-3,4-dione product (Scheme 6.143 a) [281]. Hydrolysis of the monochloride provided a 2-aryl-l-hydroxycyclobut-l-ene-3,4-dione, an inhibitor of protein tyrosine phosphatases [281], Formylation of 4-chloro-3-nitrophenol with hexamethylenetetramine and trifluoroacetic acid (TFA) at 115 °C for 5 h furnished the corresponding benzaldehyde in 43% yield, which was further manipulated into a benzofuran derivative (Scheme 6.143b) [282]. 4-Chloro-5-bromo-pyrazolopyrimidine is an important intermediate in the synthesis of pyrazolopyrimi-dine derivatives showing activity against multiple kinase subfamilies (see also Scheme 6.20) and can be rapidly prepared from 4-chloropyrazolopyrimidine and N-bromosuccinimide (NBS) by microwave irradiation in acetonitrile (Scheme... 

Finally, Cristau and coworkers have reported on a quite efficient preparation of triphenylphosphine oxide (Figure 2.13) by a similar addition-elimination reaction of red phosphorus with iodobenzene in the presence of a Lewis acid catalyst followed by oxidation of an intermediate tetraarylphosphonium salt.42 This approach holds the potential for the preparation of a variety of triarylphosphine oxides without proceeding through the normally used Grignard reagent. Of course, a variety of approaches is available for the efficient reduction of phosphine oxides and quaternary phosphonium salts to the parent phosphine, including the use of lithium aluminum hydride,43 meth-ylpolysiloxane,44 trichlorosilane,45 and hexachlorodisilane.46... 

For the synthesis of heterocycles, an efficient strategy has been introduced utilizing the dual transition metal sequences (Scheme 6).11,lla The key issue is the compatibility of the two catalyst systems. Jeong et al. studied the one-pot preparation of bicyclopentenone 35 from propargylsulfonamide 33 and allylic acetate.11 This transformation includes two reactions the first palladium-catalyzed allylation of 33 generates an enyne 34 and the following Pauson-Khand type reaction (PKR) of 34 yields a bicyclopentenone 35. The success of this transformation reflects the right combination of catalysts which are compatible with each other because the allylic amination can be facilitated by the electron-rich palladium(O) catalyst and the PKR needs a Lewis-acidic catalyst. Trost et al. reported the one-pot enantioselective... 

Aiyl chlorides and bromides can be easily prepared by electrophilic substitution of arenes with chlorine and bromine respectively in the presence of Lewis acid catalysts like iron or Iron(III) chloride. 

A chiral dinuclear Ti(IV) Lewis acid catalyst 18 can be prepared in situ from a 1 2 molar mixture of (7 )-3,3 -di(2-mesitylethynyl)binaphthol and Ti(Oi-Pr)4 at ambient temperature. The 3- and 3 -substituents on the chiral ligand are effective for preventing undesired aggregation between Ti(IV) complexes and increasing the enantioselectivity (up to 82% ee) in the Diels-Alder reaction of methacrolein with cyclopentadiene (Scheme 12.16). ... 

Next to the above presented use of SiCl for the in situ preparation of a Lewis acid catalyst with a Lewis base for the aldol reaction, it is possible to apply this compound as a reagent in the ring opening of epoxides leading to chlorinated alcohols. Denmark [104] reported that the chiral phosphoramide 38 catalyzed the asymmetric ring opening reaction of meso-epoxides in the presence of tetrachlo-rosilane. Similar examples were provided by Hashimoto in 2002 [105], applying the A -oxide 39 as catalyst (Scheme 30). 

---