Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

LATEX DIPPING

Tire Cord. Melamine resins are also used to improve the adhesion of mbber to reinforcing cord in tires. Textile cord is normally coated with a latex dip solution composed of a vinylpyridine—styrene—butadiene latex mbber containing resorcinol—formaldehyde resin.. The dip coat is cured prior to use. The dip coat improves the adhesion of the textile cord to mbber. Further improvement in adhesion is provided by adding resorcinol and hexa(methoxymethyl) melamine [3089-11 -0] (HMMM) to the mbber compound which is in contact with the textile cord. The HMMM resin and resorcinol cross-link during mbber vulcanization and cure to form an interpenetrating polymer within the mbber matrix which strengthens or reinforces the mbber and increases adhesion to the textile cord. Brass-coated steel cord is also widely used in tires for reinforcement. Steel belts and bead wire are common apphcations. Again, HMMM resins and resorcinol [108-46-3] are used in the mbber compound which is in contact with the steel cord to reinforce the mbber and increase the adhesion of the mbber to the steel cord. This use of melamine resins is described in the patent Hterature (49). [Pg.331]

For natural or neoprene latex dipping, suitable coagulants are as foUow ... [Pg.259]

The polymer is a water-soluble viscous liquid which has found application in the adhesive and rubber industries. One particular use has been a heat sensitiser used in the manufacture of rubber latex dipped goods. [Pg.476]

S. Bandyopadhyay, S.L. Agrawal, P. Sajith, N. Mandal, S. Dasgupta, R. Mukhopadhyay, A.S. Deuri, and S.C. Ameta, Research on the application of recycled waste RFL (Resorcinol-Formaldehyde-Latex) dip solid in Styrene Butadiene Rubber based compounds. Progress in Rubber, Plastics and Recycling Technology, 23(1), 21, 2007. [Pg.1041]

Ca(N03)2, used in an alcoholic solution in coagulant dipping for the manufacture of latex dipped goods. [Pg.16]

Latex dipping is far more common than solution dipping, although for those polymers not available as a latex the latter is frequently the only option. If a latex is available then the product obtained from it is generally superior to that derived from solution dipping. [Pg.177]

Latex Dipping, Principal Methods Simple Dipping... [Pg.177]

Subcategory 10 Latex-Dipped, Latex-Extruded, and Latex Molded Goods ... [Pg.546]

Latex-dipped, latex-extruded, and latex-molded goods. [Pg.547]

Rubber fabricating operations include latex-dipped, extruded, and molded goods (LDEM), and general molded, extruded, and fabricated rubber (GMEF). There are an estimated 1385 rubber fabricating plants in the United States. [Pg.575]

SRF. [S nectady] Resorcinol formaldehyde preform resin sol n. bonding agent ukd in rubber compds. to improve adhesion resorcinol donor in re-sordncd-formaldehyde latex dips. [Pg.348]

Vulkadur. [Bayer Miles] pOTmaldehyde resins reinforcing and hardening agent, bonding agent for rubber goods, latex dips for textiles, tire c( d. [Pg.403]

CAS 1333-86-4 EINECS/ELINCS 215-609-9 Uses Colorant, filler in latex dipped goods, latex foam, latex thread, paints/ coatings, conductive coatings Features Medium jetness Properties Anionic 35% solids Octojet494 [Tiarco]... [Pg.590]

Uses Antiwebbing agent in latex dipping and coating compds. food-contact paper/paperboard... [Pg.591]

See other pages where LATEX DIPPING is mentioned: [Pg.253]    [Pg.260]    [Pg.274]    [Pg.470]    [Pg.364]    [Pg.166]    [Pg.166]    [Pg.177]    [Pg.358]    [Pg.552]    [Pg.253]    [Pg.260]    [Pg.274]    [Pg.692]    [Pg.73]    [Pg.361]    [Pg.73]    [Pg.361]    [Pg.432]    [Pg.357]    [Pg.200]    [Pg.276]   


SEARCH



Dip, dipping

Dipping

© 2024 chempedia.info