Isotropic conductive adhesives matrix materials

There are two types of conductive adhesives conventional materials that conduct electricity equally in all directions (isotropic conductors) and those materials that conduct in only one direction (anisotropic conductors). Isotropically conductive materials are typically formulated by adding silver particles to an adhesive matrix such that the percolation threshold is exceeded. Electrical currents are conducted throughout the composite via an extensive network of particle-particle contacts. Anisotropically conductive adhesives are prepared by randomly dispersing electrically conductive particles in an adhesive matrix at a concentration far below the percolation threshold. A schematic illustration of an anisotropically conductive adhesive interconnection is shown in Fig. 1. The concentration of particles is controlled such that enough particles are present to assure reliable electrical contacts between the substrate and the device (Z direction), while too few particles are present to achieve conduction in the X-Y plane. The materials become conductive in one direction only after they have been processed under pressure they do not inherently conduct in a preferred direction. Applications, electrical conduction mechanisms, and formulation of both isotropic and anisotropic conductive adhesives are discussed in detail in this chapter. 

---