Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Transuranium isotopes

Planet pluto) Plutonium was the second transuranium element of the actinide series to be discovered. The isotope 238pu was produced in 1940 by Seaborg, McMillan, Kennedy, and Wahl by deuteron bombardment of uranium in the 60-inch cyclotron at Berkeley, California. Plutonium also exists in trace quantities in naturally occurring uranium ores. It is formed in much the same manner as neptunium, by irradiation of natural uranium with the neutrons which are present. [Pg.204]

Dmitri Mendeleev) Mendelevium, the ninth transuranium element of the actinide series discovered, was first identified by Ghiorso, Harvey, Choppin, Thompson, and Seaborg in early in 1955 during the bombardment of the isotope 253Es with helium ions in the Berkeley 60-inch cyclotron. The isotope produced was 256Md, which has a half-life of 76 min. This first identification was notable in that 256Md was synthesized on a one-atom-at-a-time basis. [Pg.214]

The effects of a rather distinct deformed shell at = 152 were clearly seen as early as 1954 in the alpha-decay energies of isotopes of californium, einsteinium, and fermium. In fact, a number of authors have suggested that the entire transuranium region is stabilized by shell effects with an influence that increases markedly with atomic number. Thus the effects of shell substmcture lead to an increase in spontaneous fission half-Hves of up to about 15 orders of magnitude for the heavy transuranium elements, the heaviest of which would otherwise have half-Hves of the order of those for a compound nucleus (lO " s or less) and not of milliseconds or longer, as found experimentally. This gives hope for the synthesis and identification of several elements beyond the present heaviest (element 109) and suggest that the peninsula of nuclei with measurable half-Hves may extend up to the island of stabiHty at Z = 114 andA = 184. [Pg.227]

In addition to stable elements, radioactive elements are also produced in stars. The unstable but relatively long-lived isotopes °K, Th, and make up the internal heat source that drives volcanic activity and processes related to internal convection in the terrestrial planets. The short-lived transuranium elements such as Rn and Ra that are found on the Earth are all products of U and Th decay. [Pg.19]

Exposure Levels in Humans. Although some data on the levels of americium in human tissues exposed to natural background levels (food, water, and air) are available, few measurements have been made on the americium content in human tissues. The principal source of information about occupationally exposed individuals is the U.S. Transuranium and Uranium Registries (USTUR) Tissue Program and database, established to document levels and distribution of uranium and transuranium isotopes in human tissues for occupationally exposed workers (USTUR 1999). Several major database files are available. [Pg.196]

Like einsteinium, this unstable element was discovered in the fallout from the first hydrogen bomb. To date, only fragments in microgram amounts can be isolated. 258Fm ends the series of transuranium elements that can be produced in a reactor by neutron bombardment. The longest-lived isotope decays with a half-life of 100 days... [Pg.158]

The production of electricity fiom nuclear fission energy is accompanied by formation of radioactive waste, of which the larger hazard is the presence of long-lived transuranium isotopes. The problems associated with this waste are still debated, but if the transuranium isotopes could be removed by exhaustive reprocessing and transmuted in special nuclear devices, the hazard of the waste would be drastically reduced (Chapter 12). This may require new selective extractants and diluents as well as new process schemes. Research in this field is very active. [Pg.28]

In order to determine the maximum atomic mass produced in the r process, we must find the point when induced (destructive) fission enters into competition with (constructive) neutron capture on the path followed by the process across the (N, Z) map of the isotopes. This question requires calculation of the fission barrier far from the region of known nuclei, which is no simple matter. The possibility of producing mythical, superheavy, transuranium nuclei (around Z = 114 and = 184) has not yet been demonstrated. [Pg.168]

Symbol Bk atomic number 97 atomic weight of most stable isotope 247.07 a transuranium radioactive element synthesized in the laboratory electronic configuration [Rn]5/97s2 oxidation states -i-3 and +4. Isotopes, half-hfe and decay modes are given below ... [Pg.95]

Berkelium does not occur in nature. The element was synthesized in 1949 at the Lawrence Berkeley Laboratory in Berkeley, California hy Thompson, Ghiorso and Seahorg (Thompson, S.G., Ghiorso, A. and G. T. Seahorg. 1950. Phys. Rev., 77, 838). It has 12 isotopes. It is the fifth man-made transuranium element. Presently, the element has no commercial apphcation. [Pg.96]

Symbol Cf atomic number 98 atomic weight 251 (the principal isotope) californium is a transuranium radioactive actinide element electron configuration [Rn]5/i°7s2 valence state +3 most stable isotope Cf, half-life 800 years isotope properties are presented below ... [Pg.179]

Symbol Cm atomic number 96 atomic weight 247 a radioactive transuranium actinide series element electron configuration [Rn]5/ 6di7s2 most stable valence state +3 most stable isotope Cm-247. Curium isotopes, half-hves and decay modes are ... [Pg.279]

It was detected by Urey, Brickwedde and Murphy in 1932. It occurs in all natural compounds of hydrogen including water, as well as in free hydrogen molecules at the ratio of about one part per 6,000 parts hydrogen. The principal application of deuterium is in tracer studies for measuring rates and kinetics of chemical reactions. It also is used in thermonuclear reactions and as a projectile in cyclotrons for bombardment of atomic nuclei to synthesize isotopes of several transuranium elements. Deuterium oxide, D2O, or heavy water is used as a neutron moderator in nuclear reactors. [Pg.288]

Symbol Es atomic number 99 atomic weight 252 a radioactive transuranium, actinide series, manmade element electron configuration [Rn]5/ i7s2 the most stable isotope Es-254. Isotopes, their half-lives and the mode of decay are as follows ... [Pg.291]

Symbol Fm atomic number 100 atomic weight 257 a man-made transuranium radioactive element of the actinide series electron configuration [Rn]5/i27s2 oxidation state -1-3 sixteen isotopes are known most stable isotope Fm-257, ti/2 100.5 days. [Pg.296]

Symbol Lr atomic number 103 atomic weight 262 a transuranium inner-transition actinide series element a synthetic radioactive element electron configuration [RnjTs b/ Sdi valence +3 six isotopes of masses 255 to 260 have been synthesized longest-lived known isotope Lr-260 has half-life of 3 minutes. [Pg.453]

Ah lawrencium isotopes of masses 255 to 260 have been synthesized by bombardment of transuranium elements with heavy ions. [Pg.453]

Symbol Md atomic number 101 atomic weight (most stable isotope) 257 a man-made radioactive transuranium element an inner-transition element of actinide series electron configuration [Rn]5/i37s2 valence +2, -i-3. Isotopes, half-lives and their decay modes are ... [Pg.558]

The element first was made by Ghiorso, Harvey, Choppin, Thompson, and Seaborg in 1955 in Berkeley, California. It was synthesized by bombardment of einsteinium-253 with alpha particles of 41 MeV energy in a 60-inch cyclotron. The element was named Mendelevium in honor of Russian chemist Dimitri Mendeleev. Mendelevium —258 isotope with a half-life of 60 days was discovered in 1967. The element has no commercial use except in research to synthesize isotopes of other transuranium elements. [Pg.558]

Symbol Np atomic number 93 atomic weight 237 (most stable isotope) a man-made transuranium radioactive element actinide series electron configuration [Rn]5/" 6di7s2 oxidation states +3, +4, -i-5 and +6 most stable valence... [Pg.603]

Neptunium, the first transuranium element, was discovered hy E. M. McMdlan and P. H. Ahelson in 1940 in Berkeley, California. It was produced in the cyclotron in a nuclear reaction by bombarding uranium-238 with neutrons. An isotope of mass 239 and atomic number 93 and ti/2 of 2.4 days was produced in this reaction. Neptunium-237, the longest-lived alpha-emitter with half-life 2.14x10 years, was discovered two years later in 1942 by Wahl and Seaborg. The new element was named after the planet Neptune, the planet next to Uranus in the solar system. [Pg.604]

Symbol Pu atomic number 94 atomic weight 244 an actinide series transuranium element a man-made radioactive element electron configuration [Rn]5/ 7s2 partially filled f suhsheU valence states +3, +4, -i-5, +6 eighteen isotopes in the mass range 228-230, 232-246 aU isotopes radioactive the longest lived isotope Pu-244, ti/2 8.2x10 year the shortest hved isotope Pu-233, ti/2 20.9 minute. [Pg.726]

Plutonium is the most important transuranium element. Its two isotopes Pu-238 and Pu-239 have the widest applications among all plutonium isotopes. Plutonium-239 is the fuel for nuclear weapons. The detonation power of 1 kg of plutonium-239 is about 20,000 tons of chemical explosive. The critical mass for its fission is only a few pounds for a solid block depending on the shape of the mass and its proximity to neutron absorbing or reflecting substances. This critical mass is much lower for plutonium in aqueous solution. Also, it is used in nuclear power reactors to generate electricity. The energy output of 1 kg of plutonium is about 22 million kilowatt hours. Plutonium-238 has been used to generate power to run seismic and other lunar surface equipment. It also is used in radionuclide batteries for pacemakers and in various thermoelectric devices. [Pg.727]

The XPS valence band spectra for the dioxides of the transuranium elements (from Np to Bk) have been presented in an extensive and pioneering work that also includes core level spectra and has been for a long time the only photoemission study on highly radioactive compounds. High resolution XPS spectra (AE = 0.55 eV) were recorded on oxidized thin metal films (30 A) deposited on platinum substrates with an isotope separator. (The oxide films for Pu and the heavier actinides may contain some oxides with lower stoichiometry, since starting with Pu, the sesquioxides of the heavier actinides begin to form in high vacuum conditions.)... [Pg.245]

Particle accelerators are used to produce most isotopes by transmutation. All elements greater than uranium, known as the transuranium elements, have been produced in particle accelerators. For example. [Pg.253]

BERKELIUM. [CAS 7440-40-6]. Chemical element, symbol Bk, at. no. 97, at wt. 247 (mass number of the most stable isotope), radioactive metal of the Actinide series, also one of the Transuranium elements. All isotopes of berkelium are radioactive all must be produced synthetically. The element was discovered by G.T. Seaborg and associates at the Metallurgical Laboratory of the University of Chicago in 1949. At that time, the dement was produced by bombarding 241 Am with helium ions. 4i Bk is an alpha-emitter and may be obtained by alpha-bombardment of ,4Cm. 245Cm. or 246Ciu. Ollier nuclides include those of mass numbers 243—246 and 248-250. Probable electronic configuration ... [Pg.194]


See other pages where Transuranium isotopes is mentioned: [Pg.92]    [Pg.92]    [Pg.203]    [Pg.207]    [Pg.208]    [Pg.209]    [Pg.226]    [Pg.226]    [Pg.323]    [Pg.18]    [Pg.191]    [Pg.343]    [Pg.37]    [Pg.296]    [Pg.519]    [Pg.197]    [Pg.874]    [Pg.243]    [Pg.311]    [Pg.415]    [Pg.430]    [Pg.438]    [Pg.283]    [Pg.72]    [Pg.274]   
See also in sourсe #XX -- [ Pg.411 ]




SEARCH



Transuranium

© 2024 chempedia.info