Isotactic, definition

The fraction of isotactic sequences increases as increases, as required by the definition of these quantities. 

An interesting aspect of the benzofuran cationic polymerization was uncovered by Natta, Farina, Peraldo and Bressan who reported in 196160,61 that an asymmetric synthesis of an optically active poly(benzofuran) could be achieved by using AlCl2Et coupled with (-)j3-phenylalanine, (+)camphorsulphonic acid or with (-)brucine. The optical activity was definitely due to the asymmetric carbon atoms in the polymer chain, indicating that at least some of the polymer s macromolecules possessed a di-isotactic structure, v/ z.62 ... 

Although the definitions of isotactic, syndiotactic, and atactic polymers according to International Union of Pure and Applied Chemistry (IUPAC) rules are well established in terms of succession of mesa (m) or racemic (r) dyads,12 the symbolism of (+) and (—) bonds allows the easy treatments of possible configurations in cases of any complexity.1 Moreover, the (+) or (—) character of the bonds in a polymer chain is strictly related to the accessibility of gauche+ or gauche conformations of the bonds and, therefore, to the formation of right-handed or left-handed helical conformations.1... 

The formal view. The formal view is much simpler. The racemic catalysts have a twofold axis and therefore C2-symmetry. Both sites of the catalysts will therefore preferentially co-ordinate to the same face (be it re or si) of propene. Both sites will show the same enantiospecificity the twofold axis converts one site in the other one. Subsequently, insertion will lead to the same enantiomer. According to the definition of Natta, this means that isotactic polymer will be formed. If the chain would move from one site to the other without insertion of a next molecule of propene, it will continue making the same absolute configuration at the branched carbon atom. Hence, no mistake occurs when this happens. 

The contrast between formulas 20 and 21, both pertaining to isotactic polyethylidene, should be noted This contrast occurs because the polymer repeating unit has only one carbon atom in the chain and thus there is no correspondence between such periodicity and that of the zigzag representation. The classical definition of an isotactic polymer (as one in which all substituents are on the same side of the chain) holds true, in general terms, only if the polymer is represented in the Fischer projection. Analogous considerations pertain to syndiotactic polyethylidene 22 and 23. 

The butadiene polymers represent another cornerstone of macromolecular stereochemistry. Butadiene gives rise to four different types of stereoregular polymers two with 1,2 linkage and two with 1,4. The first two, isotactic (62) and syndiotactic (25), conform to the definitions given for vinyl polymers, while the latter have, for eveiy monomer unit, a disubstituted double bond that can exist in the two different, cis and trans, configurations (these terms are defined with reference to the polymer chain). If the monomer units all have the same cis or trans configuration the polymers are called cis- or trans-tactic (30 and 31). The first examples of these stereoisomers were cited in the patent literature as early as 1955-1956 (63). Structural and mechanistic studies in the field have been made by Natta, Porri, Corradini, and associates (65-68). 

In order to present clear concepts it is necessary that idealized definitions be adopted but it is recognized that the realities of polymer science must be faced. Deviations from ideality arise with polymers at both molecular and bulk levels in ways that have no parallel with the ordinary small molecules of organic or inorganic chemistry. Although such deviations are not explicitly taken into account in the definitions below, the nomenelature recommended can usefully be applied to the predominant structural features of real polymer molecules, if necessary with self-explanatory, if imprecise, qualifications such as almost completely isotactic or highly syndiotactic . Although such expressions lack the rigour beloved by the purist, every experienced polymer scientist knows that communication in this discipline is impossible without them. 

It is immaterial whether (1) or (2) is taken as the configurational repeating unit and ster corep eating unit of isotactic polypropene (see Definition 1.7) this is so because the two infinite chains, one built up of identical configurational units (1) and the other built up of... 

Now let us look at triad segments of our poly(vinyl chloride). The first one had meso adjacent units and is isotactic by definition of the meso, racemic argument but the adjacent chlorides are not on one side of the plane. 

These definitions are clarified by considering a portion of a polymer chain such as XVII. Chain segment XVII has a total of 9 repeating units but only 8 dyads and 7 triads. There are 6 meso dyads and 2 racemic dyads (m) —, (r) —, There are 4 isotactic, 2 heterotactic, and 1 syndiotactic triads mm) = (mr) — j, (rr) — A. 

Prepare a plot of 7r/c versus c for these results and evaluate (7r/c)0. Calculate M and B for this system. Define what is meant by an atactic polymer and compare with syndiotactic and isotactic polymers. List reference(s) consulted for these definitions. 

Some information is available on other acrylates. N,N-disubstituted acrylamides form isotactic polymers with lithium alkyls in hydrocarbons (12). t-Butylacrylate forms crystallizable polymers with lithium-based catalysts in non-polar solvents (65) whereas the methyl, n-butyl, sec-butyl and isobutyl esters do not. Isopropylacrylate also gives isotactic polymer with lithium compounds in non-polar solvents (34). The inability of n-alkylacrylates to form crystallizable polymers may result from a requirement for a branched alkyl group for stereospecific polymerization. On the other hand lack of crystallizability cannot be taken as definite evidence of a lack of stereoregulating influence, as sometimes quite highly regular polymer fails to crystallize. The butyllithium-initiated polymers of methylmethacrylate for instance cannot be crystallized. The presence of a small amount of more random structure appears to inhibit the crystallization process1. 

In 1955, for the first time, G. Natta obtained definite amounts of stereoregular polystyrene by polymerization, in the presence of titanium chloride Cl4Ti. This isotactic polystyrene has a crystallinity ratio which may reach 90 per cent. The melting temperature is 240 °C, The crystals belong to the rhombohedric system. 

---