Intrinsically conducting polymer resin

Intrinsically conducting polymers (ICPs) are electroactive long-range conjugated polymers. They generally possess reversible redox performance, while metal corrosion is also a redox process therefore, it is possible that ICPs may find application for metal anticorrosion. It is true since the early report for corrosion inhibition performance of ICPs such as polyaniline (PANI) by DeBerry [5]. After more than 20 years of development, now ICPs have received much attention, since th may be a kind of alternative anticorrosion agents instead of the toxic heavy metal in anticorrosion coating, no matter they are used alone or as composite with substrate resin. 

These tests were performed on materials with the same characteristics but with different thicknesses thus, the intrinsic thermal conductivity could be resolved at different temperatures and compression pressures. Through these tests, the thermal conductivity of TGP-H carbon fiber papers was measured and achieved the same value as that reported by the manufacturer. In addition, it was observed that the thermal conductivity of the CFPs decreased from 1.80 + 0.27 W m i K i (af 26°C) to 1.24 + 0.19 W m-i K i (at 73°C). This result was suggested to be due to the presence of carbonized thermosetting resin on the CFPs. The thermal conductivity of fhe resin, which is a thermosetting polymer and acts as a binder, decreases with increasing temperature. For carbon cloth (without any resin), no significant changes in thermal conductivity were noted when the temperature was increased. 

The fact that plastics are good insulators does not mean that plastics are inert in an electrical field. They can in fact, be made to conduct electricity by the addition of fillers such as carbon black and metallic flake. The type and degree of interaction depends on the polarity of the basic resin material and the ability of an electrical field to produce ions that will cause current flows. In most applications for plastics, the intrinsic properties of the polymer are related to the performance under specific test conditions. The properties of interest are the dielectric strength, the dielectric constant at a range of frequencies, the dielectric loss factor at a range of frequencies, the volume resistivity, the surface resistivity, and the arc resistance. The last three are sensitive to moisture content in many materials. These properties are determined by the use of standardized tests described by ASTM (Table 16-1). These properties of the plastics are temperature dependent as are many of their other properties. Temperature dependence must be recognized to avoid problems in electrical products made of plastics. 

---