Alkenes intramolecular reactions

An efficient carboannulation proceeds by the reaction of vinylcyclopropane (135) or vinylcyclobutane with aryl halides. The multi-step reaction is explained by insertion of alkene, ring opening, diene formation, formation of the TT-allylpalladium 136 by the readdition of H—Pd—I, and its intramolecular reaction with the nucleophile to give the cyclized product 137[I08]. 

Intramolecular reactions with alkenes. While the intermolecular reaction is limited to unhindered alkenes, the intramolecular version permits the participation of even hindered substituted alkenes, and various cyclic compounds are prepared by the intramolecular Heck reaction. Particularly the... 

Intramolecular reaction can be used for polycyclization reaction[275]. In the so-called Pd-catalyzed cascade carbopalladation of the polyalkenyne 392, the first step is the oxidative addition to alkenyl iodide. Then the intramolecular alkyne insertion takes place twice, followed by the alkene insertion twice. The last step is the elimination of/3-hydrogen. In this way, the steroid skeleton 393 is constructed from the linear diynetriene 392(276]. 

In the presence of a double bond at a suitable position, the CO insertion is followed by alkene insertion. In the intramolecular reaction of 552, different products, 553 and 554, are obtained by the use of diflerent catalytic spe-cies[408,409]. Pd(dba)2 in the absence of Ph,P affords 554. PdCl2(Ph3P)3 affords the spiro p-keto ester 553. The carbonylation of o-methallylbenzyl chloride (555) produced the benzoannulated enol lactone 556 by CO, alkene. and CO insertions. In addition, the cyclobutanone derivative 558 was obtained as a byproduct via the cycloaddition of the ketene intermediate 557[4I0]. Another type of intramolecular enone formation is used for the formation of the heterocyclic compounds 559[4l I]. The carbonylation of the I-iodo-1,4-diene 560 produces the cyclopentenone 561 by CO. alkene. and CO insertions[409,4l2]. 

Butyrolactones are prepared by intramolecular reaction of haloallylic 2-alkynoates. The a-chloromethylenebutyrolactone 301 is prepared by the intramolecular reaction of300[150,151]. 4 -Hydroxy-2 -alkenyl 2-alkynoates can be used instead of haloallylic 2-alkynoates, and in this reaction, Pd(II) is regenerated by elimination of the hydroxy group[152]. As a related reaction, the q-(chloromethylene)-7-butyrolactone 304 is obtained from the cinnamyl 2-alkynoate 302 in the presence of LiCl and CuCbflSS]. Isohinokinin (305) has been synthesized by this reaction[l 54]. The reaction is explained by chloro-palladation of the triple bond, followed by intramolecular alkene insertion to generate the alkylpalladium chloride 303. Then PdCb is regenerated by attack of CuCb on the alkylpalladium bond as a key step in the catalytic reaction. 

The reverse reaction (formation of metal alkyls by addition of alkenes to M-H) is the basis of several important catalytic reactions such as alkene hydrogenation, hydroformylation, hydroboration, and isomerization. A good example of decomposition by y3-elimination is the first-order intramolecular reaction ... 

For reactions of A-acyliminium ions with alkenes and alkynes one has to distinguish between A-acyliminium ions locked in an s-trans conformation and those which (can) adopt an s-cis conformation. The former type reacts as a (nitrogen stabilized) carbocation with a C —C multiple bond. Although there are some exceptions, the intramolecular reaction of this type is regarded as an anti addition to the 7t-nucleophile, with (nearly) synchronous bond formation, the conformation of the transition state determining the product configuration. 

Structural analogues of the /]4-vinylketene E were isolated by Wulff, Rudler and Moser [15]. The enaminoketene complex 11 was obtained from an intramolecular reaction of the chromium pentacarbonyl carbene complex 10. The silyl vinylketene 13 was isolated from the reaction of the methoxy(phenyl)-carbene chromium complex 1 and a silyl-substituted phenylacetylene 12, and -in contrast to alkene carbene complex 7 - gave the benzannulation product 14 after heating to 165 °C in acetonitrile (Scheme 6). The last step of the benzannulation reaction is the tautomerisation of the /]4-cyclohexadienone F to afford the phenol product G. The existence of such an intermediate and its capacity to undergo a subsequent step was validated by Wulff, who synthesised an... 

The addition, therefore, follows Markovnikov s rule. Primary alcohols give better results than secondary, and tertiary alcohols are very inactive. This is a convenient method for the preparation of tertiary ethers by the use of a suitable alkene such as Me2C=CH2. Alcohols add intramolecularly to alkenes to generate cyclic ethers, often bearing a hydroxyl unit as well. This addition can be promoted by a palladium catalyst, with migration of the double bond in the final product. Rhenium compounds also facilitate this cyclization reaction to form functionalized tetrahydrofurans. 

Iodine is a very good electrophile for effecting intramolecular nucleophilic addition to alkenes, as exemplified by the iodolactonization reaction71 Reaction of iodine with carboxylic acids having carbon-carbon double bonds placed to permit intramolecular reaction results in formation of iodolactones. The reaction shows a preference for formation of five- over six-membered72 rings and is a stereospecific anti addition when carried out under basic conditions. 

According to the stepwise electrophilic reaction mechanism, the differences in the stereochemistries of the products from the reactions of alkenes with cyclic 49 and acyclic 51 disulfonium dications can be explained by the larger rates of the intramolecular reactions. In the case of a cyclic dication, the carbocationic center in intermediate 94, which is formed as the result of initial attack by a S-S dication on a double C=C bond reacts with nucleophile intramolecularly, thus conserving the configuration of the substituents at the double bond. On the other hand, an acyclic dication undergoes transformation to two separate particles (95 and dimethylsulfide) with a consequent loss of stereoselectivity. Additional experiments with deuteretad alkenes confirm that reaction is not stereoselective, lending further support to the stepwise mechanism (Scheme 36).106... 

Mechanistic evidence indicates 450,451> that the triplet enone first approaches the olefinic partner to form an exciplex. The next step consists in the formation of one of the new C—C bonds to give a 1,4-diradical, which is now the immediate precursor of the cyclobutane. Both exciplex and 1,4-diradical can decay resp. disproportionate to afford ground state enone and alkene. Eventually oxetane formation, i.e. addition of the carbonyl group of the enone to an olefin is also observed452. Although at first view the photocycloaddition of an enone to an alkene would be expected to afford a variety of structurally related products, the knowledge of the influence of substituents on the stereochemical outcome of the reaction allows the selective synthesis of the desired annelation product in inter-molecular reactions 453,454a b). As for intramolecular reactions, the substituent effects are made up by structural limitations 449). 

Intermolecular Cycloaddition at the C=C Double Bond Addition at the C=C double bond is the main type of 1,3-cycloaddition reactions of nitrile oxides. The topic was treated in detail in Reference 157. Several reviews appeared, which are devoted to problems of regio- and stereoselectivity of cycloaddition reactions of nitrile oxides with alkenes. Two of them deal with both inter- and intramolecular reactions (158, 159). Important information on regio-and stereochemistry of intermolecular 1,3-dipolar cycloaddition of nitrile oxides to alkenes was summarized in Reference 160. 

The mechanism involves the dissociation of the coordinated borane 15 to generate a monoborane intermediate 16. Coordination of the alkene would generate the alkene borane complex. A /3-borylalkylhydride with B-H stabilization is certainly an important resonance structure of 17. An intramolecular reaction would extrude the alkyl boronate ester product and coordination of HBcat would regenerate the monoborane intermediate. 

The intramolecular reaction of activated alkenes of the type 8 leads to the formation of 5- or 6-membered rings [26] and has been carried out only at a mercury cathode in a divided cell. In these processes, the activated alkene radical-anion is formed at a less negative potential than that required for cleavage of the carbon-bromine bond. Cyclization then occurs by nucleophilic substitution. 

Radical intermediates are also trapped by intramolecular reaction with an alkene or alkyne bond. At a mercury cathode this process competes with formation of the dialkylmercury [51], At a reticulated vitreous carbon cathode, this intramolecular cyclization of radicals generated by reduction of iodo compounds is an important process. Reduction of l-iododec-5-yne 5 at vitreous carbon gives the cyclopentane... 

In contrast to the intermolecular cyclopropanation, the dirhodium tetraprolinates give modest enantioselectivities for the corresponding intramolecular reactions with the do-nor/acceptor carbenoids [68]. For example, the Rh2(S-DOSP)4-catalyzed reaction with al-lyl vinyldiazoacetate 32 gives the fused cyclopropane 33 in 72% yield with 72% enantiomeric excess (Eq. 4) [68]. The level of asymmetric induction is dependent upon the substitution pattern of the alkene cis-alkenes and internally substituted alkenes afford the highest asymmetric induction. Other rhodium and copper catalysts have been evaluated for reactions with vinyldiazoacetates, but very few have found broad utility [42]. 

The procedure provides a good example of a high-yield intramolecular Wurtz reaction. Internjolecular Wurtz reactions normally do not give high yields of coupled products and are accompanied by formation of alkenes and alkanes corresponding to the alkyl halide.7 In contrast, intramolecular reactions of... 

Intramolecular reactions of propargylic alcohols bearing an alkene unit at a suitable position proceeded smoothly to give the corresponding substituted chro-... 

The acyclic precursor is an oc, 3-unsaturated amido aldehyde that was condensed with iV-methylhydroxylamine to generate the nitrone ( )-48, which then underwent a spontaneous cycloaddition with the alkene to afford the 5,5-ring system of the isoxazolidinyl lactam 47. The observed product arises via the ( )-nitrone transition state A [or the (Z)-nitrone equivalent] in which the position of the benzyl group ot to the nitrone effectively controls the two adjacent stereocenters while a third stereocenter is predicted from the alkene geometry. Both transition states maintain the benzyl auxiliary in an equatorial position and thus avoid the unfavorable 1,3-diaxial interaction with the nitrone methyl or oxygen found in transition state B. Semiempirical PM3 calculations confirm the extra stability, predicting exclusive formation of the observed product 47. Related cycloadducts from the intramolecular reaction of nitrones containing ester- rather than amide-tethered alkene functionality are also known (83-85). 

The in situ formation of nitrones from oximes by 1,3-APT or 1,2-prototropy is clearly a powerful synthetic strategy but conventional nitrone generation, in particular hydroxylamine-carbonyl condensation, has been applied to numerous syntheses, in intra- and intermolecular mode (258). Accordingly, the ring systems similar to those synthesized using 1,3-APT/intramolecular nitrone-alkene cycloaddition (INAC) methodology by Heaney (313-315) (see Section 1.11.2) or Padwa and Norman (340) have been made using conventionally prepared nitrones (Scheme 1.67). As with the previous examples, once formed, the nitrones are suitably placed for a spontaneous intramolecular cycloaddition reaction with the... 

Vogel and Delavier (26) reported a synthesis of the 6-azabicyclo[3.2.2]nonane skeleton 130 using an intramolecular azide-alkene cycloaddition strategy (Scheme 9.26). When refluxed in xylene, the azide 126 underwent an intramolecular 1,3-dipolar cycloaddition with the internal alkene. Nitrogen extrusion and subsequent rearrangement led to a mixmre of compounds 128, 129, and 130. Reactions of azides with the double bond of dienes were also used in various total syntheses of alkaloids, and will be discussed later in Section 9.2.2. 

Schkeryantz and Pearson (59) reported a total synthesis of ( )-crinane (298) using an intramolecular azide-alkene cycloaddition (Scheme 9.59). The allylic acetate 294 was first subjected to an Ireland-Claisen rearrangement followed by reduction to give alcohol 295, which was then converted into the azide 296 using Mitsunobu conditions. Intramolecular cycloaddition of the azide 296 in refluxing toluene followed by extrusion of nitrogen gave the imine 297 in quantitative yield. On reduction with sodium cyanoborohydride and subsequent reaction with... 

---