Intermolecular bonding mechanism

The elastic behavior of fats may be explained by the intermolecular bonding mechanism which provides coherence to the sample. The application of the oscillatory stress will cause a spatial displacement of structural elements. The mechanical properties of the material are influenced by the geometry of the network, as well as the intermolecular, internanostructural and intermicrostmctural interactions. When the external force is removed, the solid component has an increased free energy stored in the inter- or intra-microstructural bonds that may then restore the sample to its original structure. 

An understanding of the mechanism of creep failure of polymer fibres is required for the prediction of lifetimes in technical applications. Coleman has formulated a model yielding a relationship similar to Eq. 104. It is based on the theory of absolute reaction rates as developed by Eyring, which has been applied to a rupture process of intermolecular bonds [54]. Zhurkov has formulated a different version of this theory, which is based on chain fracture [55]. In the preceding sections it has been shown that chain fracture is an unlikely cause for breakage of polymer fibres. 

The non-collective motions include the rotational and translational self-diffusion of molecules as in normal liquids. Molecular reorientations under the influence of a potential of mean torque set up by the neighbours have been described by the small step rotational diffusion model.118 124 The roto-translational diffusion of molecules in uniaxial smectic phases has also been theoretically treated.125,126 This theory has only been tested by a spin relaxation study of a solute in a smectic phase.127 Translational self-diffusion (TD)29 is an intermolecular relaxation mechanism, and is important when proton is used to probe spin relaxation in LC. TD also enters indirectly in the treatment of spin relaxation by DF. Theories for TD in isotropic liquids and cubic solids128 130 have been extended to LC in the nematic (N),131 smectic A (SmA),132 and smectic B (SmB)133 phases. In addition to the overall motion of the molecule, internal bond rotations within the flexible chain(s) of a meso-genic molecule can also cause spin relaxation. The conformational transitions in the side chain are usually much faster than the rotational diffusive motion of the molecular core. 

The effect of different bonding mechanisms, and of the primary particle size on granule strength, is shown in Figure 5.2. Four mechanisms (Capes, 1979 Sherrington and Oliver, 1981) need to be considered. First, intermolecular forces. The attractive force between particles is inversely... 

Polymer modification at the macroscopic level (either as a material subjected to mechanical processing or as a running object) consists of initiating the destructive phenomena at microdefects—that is, at submicroscopic cracks, statistically distributed on the surface or within the body of the stressed material. These cracks become centers where a detachment of intermolecular bonds occurs. This process might be called a mechanical disaggregation, the opposite of aggregation, a term that expresses (in this context) the assembly of various structural elements into polymers. 

Soviet scientists have developed a cold-cure EDS material87). Note that the epoxy binders used are in fact generally hot-cure oligomers (from the point of view of the functional groups used and the completion of cure). It turned out that the forced elastic limit and the compression elastic modulus of the matrix are the same for both hot and cold cures. The good mechanical properties of a cold cured syntactic foam seem to be due to strong intermolecular bonds. 

Polyurethanes are made by extending chains of a prepolymer made from a macro diol and a diisocyanate. The prepolymer is further extended with a diol or an amine curative. The long chains form a solid which is relatively weak. When the part is given a longer heat treatment, the molecules align themselves and intermolecular bonds (hydrogen bonding) are formed. At this point the full mechanical properties are established and the material, if suitably formulated, has excellent mechanical and chemical properties. 

Intermolecular photoreaction of an aryl halide with another aromatic compound may lead to the formation of biaryls. In this section several examples of such reactions will be discussed. In some cases, information concerning the reaction mechanism is available but the depth to which mechanisms have been investigated varies greatly. In many cases aryl radicals formed by homolysis of the carbon-halogen bond are the reactive species. Such radicals may also be produced via electron transfer, followed by departure of halide anion. In some cases aryl cations have been proposed as intermediates. Intermolecular bond formation may also be preceded by charge transfer within an exciplex or by formation of radical ion pairs. 

Many ring systems have been prepared by cycloaddition of acetylenic compounds, following concerted or multi-step intra- or intermolecular reaction mechanisms. In-particular, the placing in close proximity of triple bonds or a triple bond and another unsaturated system, such that intramolecular cycloaddition might lead to four-seven-membered rings, would seem of interest. This section deals with transannular carbon-carbon bond formation of triple bonds in acyclic and cyclic systems. 

The intermolecular forces theory and the liquid-surface film theory are believed to be the major bonding mechanisms in tablet compression. Many pharmaceutical formulations require a certain level of residual moisture to produce high quality tablets. The role of moisture in the tableting process is supported by the liquid-surface film theory. 

---