Interfacial degradation reactions materials

Interfacial phenomena play an essential role in many biomedical applications. The reaction of the body towards implants largely depends on the surface properties of the latter. The corrosion or the degradation of materials placed in contact with biological fluids is initiated at the material-fluid interface. The successful design of biosensors or of supports for cell culture relies on the tqtpropriate modification of a material surface and on the interaction of that modified surface with macromolecules in solution or with cells. An overview of key constituents and processes that are... 

As stated, one of the fundamental problems encountered in the direct oxidation of hydrocarbon fuels in SOFCs is carbon deposition on the anode, which quickly deactivates the anode and degrades cell performance. The possible buildup of carbon can lead to failure of the fuel-cell operation. Applying excess steam or oxidant reagents to regenerate anode materials would incur significant cost to SOFC operation. The development of carbon tolerant anode materials was summarized very well in several previous reviews and are not repeated here [7-9], In this section, the focus will be on theoretical studies directed toward understanding the carbon deposition processes in the gas-surface interfacial reactions, which is critical to the... 

In this chapter the technological development in cathode materials, particularly the advances being made in the material s composition, fabrication, microstructure optimization, electrocatalytic activity, and stability of perovskite-based cathodes will be reviewed. The emphasis will be on the defect structure, conductivity, thermal expansion coefficient, and electrocatalytic activity of the extensively studied man-ganite-, cobaltite-, and ferrite-based perovskites. Alterative mixed ionic and electronic conducting perovskite-related oxides are discussed in relation to their potential application as cathodes for ITSOFCs. The interfacial reaction and compatibility of the perovskite-based cathode materials with electrolyte and metallic interconnect is also examined. Finally the degradation and performance stability of cathodes under SOFC operating conditions are described. 

The effectiveness of the method is most probably based on the fact that alkyl hypochlorite is formed at the oil/water interface where the cosurfactant alcohol resides. The oxidation that follows takes place either inside or on the surface of oil droplet. The rate of the reaction can result from a large hydrocarbon/water contact area permitting interaction between oil-soluble sulfide with interfacial cosurfactant that served as an intermediary. An extension ofthis procedure to mustard deactivation has also been proposed [20b]. Such systems could be also applied to the degradation of several environmentally contaminating materials The formation of microemulsions, micelles and vesicles is promoted by unfavourable interactions at the end sections of simple bilayer membranes. There is no simple theory of solute-solvent interactions. However, the formation of... 

The response reaction of the host to a foreign material remaining in the body for an extended period of time is a concern. Thus, any polymeric material to be integrated into such a delicate system as the human body must be biocompatible. Biocompatibility is defined as the ability of a material to perform with an appropriate host response in a specific application [79]. The concept include all aspects of the interfacial reaction between a material and body tissues initial events at the interface, material changes over time, and the fate of its degradation products. To be considered bio compatible, a biodegradable polymer must meet a number of requirements, given in Table 2. 

---