Inspections engineering

An experienced inspection engineer will attempt to identify the characteristics of a given structure to determine potential. specific critical damage mechanisms. No individual major concrete structure can be adequately analysed by simple mass-accumulation of data and using criteria, which are based on standard codes. This does not mean that either data-collection or available criteria are not useful, but they should be exercised with care and flexibility and the procedures for inspection customised for the given structure. 

The above factors should be taken into account by the inspection engineer in the process of assessing which inspection grade each item should be awarded. 

Inspecting engineers should be alert to inspection pitfalls ahead of column assembly. 

In general, the risk is managed by plant inspectors or inspection engineers who manage the PoF with inspection and maintenance planning. They will not normally have much ability to modify the CoF. On the other hand, management and process safety personnel may desire to manage the consequence side of the risk equation [10]. 

If the inspecting engineer has grounds to question the soundness and quality of these joints then the phase earth loop impedance test described later in this chapter should be carried out. 

Visit by Purchaser s Inspection Engineer to Vendors Works... 

H) Ensure that through on-site inspection, engineering controls are functioning properly and employees are using proper work practices and,... 

The interval between inspections may be increased (not to exceed 10 years) based upon observed conditions at the time of shop inspection, engineering review, and reliability improvements. 

---