Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Insertion reactions main group metals

Palladation of aromatic compounds with Pd(OAc)2 gives the arylpalladium acetate 25 as an unstable intermediate (see Chapter 3, Section 5). A similar complex 26 is formed by the transmetallation of PdX2 with arylmetal compounds of main group metals such as Hg Those intermediates which have the Pd—C cr-bonds react with nucleophiles or undergo alkene insertion to give oxidized products and Pd(0) as shown below. Hence, these reactions proceed by consuming stoichiometric amounts of Pd(II) compounds, which are reduced to the Pd(0) state. Sometimes, but not always, the reduced Pd(0) is reoxidized in situ to the Pd(II) state. In such a case, the whole oxidation process becomes a catalytic cycle with regard to the Pd(II) compounds. This catalytic reaction is different mechanistically, however, from the Pd(0)-catalyzed reactions described in the next section. These stoichiometric and catalytic reactions are treated in Chapter 3. [Pg.14]

This is the second chapter of a two-part review concerned with insertion reactions of transition metal-carbon a-bonded compounds. The first chapter, which appeared in Volume 11 of this series (137), provided a broad introduction to the subject of insertion reactions in general and a detailed treatment of the carbon monoxide insertion and decarbonylation. Presented herein are the insertion and elimination reactions of sulfur dioxide and of a few other unsaturated molecules. The reactions of sulfur dioxide are accorded a complete literature coverage, whereas those of the other inserting species are treated selectively. Metal-carbon a-bonded compounds of the main group elements are discussed only in the context of comparisons with their transition metal analogs. [Pg.33]

Kinetic studies on the sulfur dioxide insertion have been few and most have utilized liquid SO2 as the reaction medium. The most exhaustive investigation in neat SO2 was conducted on the systems CpFe(CO)2R and various (R Cp)Fe(CO)2R (77, 74, 75) studied cursorily were CpMo(CO)3R, CpRu(CO)2R, RMn(CO)5, and RRe(CO)5 71, 76). Kinetic studies in organic solvents have been confined to a few CpFe(CO)2R complexes 71, 77). Of the many SO2 reactions of the main group metal-carbon systems, only those involving some MesSnR aryl and benzyl compounds were examined kinetically 51, 52, 99). [Pg.38]

The ease of reversal of alkene insertion is evident from the numerous syntheses of transition metal-hydride complexes using main group metal alkyls as the source of hydride. The hydride in the products of such reactions usually arises from -hydride abstraction or elimination from intermediate unstable transition metal alkyls. This idea is reinforced by the greater effectiveness of secondary alkyls such as isopropyl or cyclohexyl compounds. However, it has been shown that in at least one case the hydride results from hydrolysis of a Pt-Mg bond, not from the alkyl formed from reaction of a Pt-Cl bond with a Grignard reagent. Several of the reactions listed in Table 1 are spontaneously reversible. Reactions where -hydride elimination has been used in the synthesis of hydrides are listed in Table... [Pg.568]

Treatment of (80) and (81) with Ru3(CO)12 gave the >/4-silatrimethylenemethane-ruthenium complexes in 9% and 22% yield, respectively. The major product of the Z-alkylidenesilacyclopropane reaction was trinuclear ruthenium carbonyl cluster (82), whose structure was established by x-ray diffraction (Equation (37)). This appears to be the first example of a main group metal-bound carbonyl inserting into a silacyclopropane <9lJA279i, 94OM4606). [Pg.322]

The 1,2-insertion of alkenes into transition metal-carbon o-bond leads to C-C bond formation under mild conditions, as described in Chapter 6. This reaction is considered to be a crucial step in the coordination polymerization and carbometalation of alkenes catalyzed by transition metal complexes. A common and important carbometalation is the Heck-type arylation or vinylation of alkene catalyzed by Pd complexes [118], The arylation of alkene, most typically, involves the formation of arylpalladium species and insertion of alkene into the Pd-aryl bond as shown in Scheme 5.20. The arylpalladium species is formed by the oxidative addition of aryl halides to Pd(0) complexes or the transmetalation of aryl compounds of main group metals with Pd(II) complexes. Insertion of alkene into the Pd-aryl bond produces 2-arylalkylpalladium species whose y6-hydrogen elimination leads to the arylalkene. Oxidative chlorination of the 2-arylalkylpalladium intermediate forms chloroalkanes as the product. [Pg.255]

Metal-insertion reactions in organometallic synthesis, as one of the results of metal activation, have been comprehensively reviewed by Luche and co-workers.In this section, the focus is on main group metals. [Pg.319]

The insertion of alkenes into M-H bonds has been examined in Chap. 4. This reaction is very important because, it leads to the dimerization, oligomerization and polymerization of alkenes. It is broad and concerns not only transition metals, but also main-group metals (group 13 Lewis acids), lanthanides and actinides. For instance, AlEt3 is an excellent initiator of olefin polymerization. This reaction can also be considered as the hydrometallation or the hydroelementation of an olefin, and stoichiometric examples have been shown. If the element E does not have the property of a Lewis acid allowing olefin pre-coordination onto a vacant site and thus facilitating insertion, the insertion reaction is not possible without a catalyst. [Pg.357]

Reductive elimination is simply the reverse reaction of oxidative addition the formal valence state of the metal is reduced by two (or one in a bimetallic reaction), and the total electron count of the complex is reduced by two. While oxidative addition can also be observed for main group elements, this reaction is more typical of the transition elements in particular the electronegative, noble metals. In a catalytic cycle the two reactions always occur pair-wise. In one step the oxidative addition occurs, followed for example by insertion reactions, and then the cycle is completed by a reductive elimination of the product. [Pg.39]

Generally, insertion of the alkyne into a metal-P bond is observed (Scheme 10).188,190 When aminoalkynes are used, the formation of a C=N double bond inhibits the interaction of that carbon with the metal centers of the cluster.186 187 When two PR groups are present, the alkyne has been observed to bridge between them as seen in Scheme 10.195,285 A second equivalent of diphenylacetylene can substitute for two carbonyl groups on the iron triangle.195 The hetero-main group element species Fe3(CO)9(NPh) (P Bu) and Fe3(CO)9(NPh)2 have been reacted with diphenylacetylene.273 Some of the products involved in the acetylene addition reaction are shown here (241-243). [Pg.125]

Fig. 8.3 Warren R. Roper (born in 1938) studied chemistry at the University of Canterbury in Christchurch, New Zealand, and completed his Ph.D. in 1963 under the supervision of Cuthbert J. Wilkins. He then undertook postdoctoral research with James P. Collman at the University of North Carolina at Chapel Hill in the US, and returned to New Zealand as Lecturer in Chemistry at the University of Auckland in 1966. In 1984, he was appointed Professor of Chemistry at the University of Auckland and became Research Professor of Chemistry at the same institution in 1999. His research interests are widespread with the emphasis on synthetic and structural inorganic and organometallic chemistry. Special topics have been low oxidation state platinum group metal complexes, oxidative addition reactions, migratory insertion reactions, metal-carbon multiple bonds, metallabenzenoids and more recently compounds with bonds between platinum group metals and the main group elements boron, silicon, and tin. His achievements were recognized by the Royal Society of Chemistry through the Organometallic Chemistry Award and the Centenary Lectureship. He was elected a Fellow of the Royal Society of New Zealand and of the Royal Society London, and was awarded the degree Doctor of Science (honoris causa) by the University of Canterbury in 1999 (photo by courtesy from W. R. R.)... Fig. 8.3 Warren R. Roper (born in 1938) studied chemistry at the University of Canterbury in Christchurch, New Zealand, and completed his Ph.D. in 1963 under the supervision of Cuthbert J. Wilkins. He then undertook postdoctoral research with James P. Collman at the University of North Carolina at Chapel Hill in the US, and returned to New Zealand as Lecturer in Chemistry at the University of Auckland in 1966. In 1984, he was appointed Professor of Chemistry at the University of Auckland and became Research Professor of Chemistry at the same institution in 1999. His research interests are widespread with the emphasis on synthetic and structural inorganic and organometallic chemistry. Special topics have been low oxidation state platinum group metal complexes, oxidative addition reactions, migratory insertion reactions, metal-carbon multiple bonds, metallabenzenoids and more recently compounds with bonds between platinum group metals and the main group elements boron, silicon, and tin. His achievements were recognized by the Royal Society of Chemistry through the Organometallic Chemistry Award and the Centenary Lectureship. He was elected a Fellow of the Royal Society of New Zealand and of the Royal Society London, and was awarded the degree Doctor of Science (honoris causa) by the University of Canterbury in 1999 (photo by courtesy from W. R. R.)...

See other pages where Insertion reactions main group metals is mentioned: [Pg.58]    [Pg.405]    [Pg.92]    [Pg.29]    [Pg.94]    [Pg.165]    [Pg.599]    [Pg.383]    [Pg.52]    [Pg.47]    [Pg.381]    [Pg.56]    [Pg.156]    [Pg.46]    [Pg.53]    [Pg.102]    [Pg.19]    [Pg.50]    [Pg.267]    [Pg.113]    [Pg.116]    [Pg.125]    [Pg.194]    [Pg.166]    [Pg.96]    [Pg.905]    [Pg.109]    [Pg.53]    [Pg.66]    [Pg.37]    [Pg.184]    [Pg.361]    [Pg.1678]    [Pg.2921]    [Pg.3925]    [Pg.5838]    [Pg.67]   
See also in sourсe #XX -- [ Pg.79 ]




SEARCH



Insertion reactions

Insertion, group

Main group

Main reaction

Main-group metal

Metal groups reactions

Metal insertion

Metal insertion reactions

Metal inserts

© 2024 chempedia.info