Input Data File

PUTBCV Inserts the prescribed velocity boundary values at the allocated place in the vector of unknowns for flow equations. 

GLEAN Cleans used arrays at the end of each segment and prepares them to be used by the next component of the program. 

SETPRM Rearranges numbers of nodal degrees of freedom to make them compatible with the velocity components at each node. For example, in a niiie-noded element allocated degree of freedom numbers for v i and vj at node n are X and X +9, respectively. 

GETMAT Reads and echo prints physical and rheological parameters and the penalty parameter used in the simulation. 

---

ERROR RETURN FOR DISCREPANCY IN INPUT DATA FILE 900 ERIN>5... 

Reads the input data file. The read statements are either included in the main module or in the subroutines that are designed to read specific parts of the data file. 

Structure of the input data file required for the running of PPVN.f is as follows Line 1 Title... 

Table 7.1 shows the structure of the input data file that is prepared according to the format described in the previous section. 

Data Input models are achieved through a standardized procedure as single values, custom distributions (normal, lognormal, etc.), distributions based on data files present in THERdbASE, or specific percentile values. Models have relational access to input data files. 

The input data file should also be constructed using any of the existing ones as a template. 

We will review, here, most of these new methods, as well as the classical ones, and will list their website address (Table 7.1), with a brief mention of their main characteristics. We have tested all of them for the purpose of this review, using the same input data files, and will describe the protocols that have been used throughout the text. 

Figure 6.1. DynaFit start windows. After loading script file, the program automatically inputs data file and plots raw data in the graphic window. Start the analysis (File->Run ) upon receiving Ready to run instruction in the status window.

The result should be a new file, complied and linked, called INVERT.EXE, that is ready to run. Then, using some editor and staying in the same subdirectory C DesignerStudio Myprojects >, you create the input data file MYMX.DAT, for example, by writing... 

Input data files and output files are standard ASCII files. 

Below we describe three practical indexing examples. The first one will be considered in detail, with all input data files included on the CD accompanying this book. The remaining two examples are illustrated without providing all input data files since we expect that the reader should be able to use existing data and reproduce indexing results independently. 

The input data file for the TREOR90 program (Ch5Ex04 Treor90-All.dat) is found on the CD and it contains the following information, where the comments after the exclamation symbols are for information purpose only and are not included in the data file ... 

Since the quality of this powder diffraction pattern is excellent, we can immediately switch to the refinement of the individual anisotropic parameters. Furthermore, the presence of diffraction data at high sinG/A, enables us to refine the individual displacement and population parameters in the 3(g) site simultaneously. Finally, the presence of an impurity was also accounted as the Le Bail s phase. The fully refined input data file. 

OMEGAF and siGMAF Contain the estimates of omega and sigma, which in this case will be the same as the values specified on the omega and sigma rows since maxeval is set to 0. The limits of the prediction intervals are stored in the variables com (i) and COM (2), which are tabulated. The input data file has to include all time points for which the interval is to be computed (including any doses). 

This is the input data file for PR2.FOR. The example given here is for ethane and n-... 

There are some other useful utilities in the LibSVM package, which are as follows In the LibSVM package, svm-scale is a tool for scahng input data file and svm-train comprises certain parameters depending on which the data are classified which mainly involve ... 

Prior to the VALKIN program s start-up it is required to enter the input data. For demonstration we provide a format of the input data file for the kinetic model of the reaction between molecular hydrogen and oxygen consisting of 35 steps [4]. We addressed this reaction in Chapters 1 and 5. 

The interactions between the objects are either of physical, chemical or mechanical type and they must be asked for in input data. Any interaction is facultative and, generally speaking, each could be applied in a restricted axial domain of an object and contains several options (model parameters, correlations or physical approach). This approach, leading to large input data files due to the definition of all the connections between objects, allows a large flexibility in sensitivity studies, code developments and new experimental test train modelling aspects. 

---