INDEX simple

Figure Bl.21.1. Atomic hard-ball models of low-Miller-index bulk-temiinated surfaces of simple metals with face-centred close-packed (fee), hexagonal close-packed (licp) and body-centred cubic (bcc) lattices (a) fee (lll)-(l X 1) (b)fcc(lO -(l X l) (c)fcc(110)-(l X 1) (d)hcp(0001)-(l x 1) (e) hcp(l0-10)-(l X 1), usually written as hcp(l010)-(l x 1) (f) bcc(l 10)-(1 x ]) (g) bcc(100)-(l x 1) and (li) bcc(l 11)-(1 x 1). The atomic spheres are drawn with radii that are smaller than touching-sphere radii, in order to give better depth views. The arrows are unit cell vectors. These figures were produced by the software program BALSAC [35]-...

Figure Bl.21.2. Atomic hard-ball models of stepped and kinked high-Miller-index bulk-temiinated surfaces of simple metals with fee lattices, compared with anfcc(l 11) surface fcc(755) is stepped, while fee...

We are now in a position to calculate the reflections from multiple mterfaces using the simple example of a thin film of material of thickness d with refractive index n.2 sandwiched between a material of refractive index (where this is generally air witii n = ) deposited onto a substrate of refractive index [35, 36], This is depicted in figure Bl.26.9. The resulting reflectivities for p- and s-polarized light respectively are given by ... 

The systematic lUPAC nomenclature of compounds tries to characterize compounds by a unique name. The names are quite often not as compact as the trivial names, which are short and simple to memorize. In fact, the lUPAC name can be quite long and cumbersome. This is one reason why trivial names are still heavily used today. The basic aim of the lUPAC nomenclature is to describe particular parts of the structure (fi agments) in a systematic manner, with special expressions from a vocabulary of terms. Therefore, the systematic nomenclature can be, and is, used in database systems such as the Chemical Abstracts Service (see Section 5.4) as index for chemical structures. However, this notation does not directly allow the extraction of additional information about the molecule, such as bond orders or molecular weight. 

When simple Hquids like naphtha are cracked, it may be possible to determine the feed components by gas chromatography combined with mass spectrometry (gc/ms) (30). However, when gas oil is cracked, complete analysis of the feed may not be possible. Therefore, some simple definitions are used to characterize the feed. When available, paraffins, olefins, naphthenes, and aromatics (PONA) content serves as a key property. When PONA is not available, the Bureau of Mines Correlation Index (BMCI) is used. Other properties like specific gravity, ASTM distillation, viscosity, refractive index. Conradson Carbon, and Bromine Number are also used to characterize the feed. In recent years even nuclear magnetic resonance spectroscopy has been... 

Typical methods are those of F. C. Zevnik and R. L. Buchanan [Chem. Eng. Progi , 59, 70-77 (Feb. 1963)] and J. H. Taylor Eng. 6-Proc. Econ., 2, 259-267, 1977). The former is mainly a graphical method of estimating the cost per functional unit (Cp) based on the capacity, the maximum pressure, the maximum temperature, and the materials of construction. The Taylor method requires the determination of the costliness index, which is dependent on the complexity of the process. A simpler method was suggested by S. R. Timms (M.Phil. thesis, Aston University, England, 1980) to give the battery hmits cost for gas phase processes only in U.S. dollars with a Marshall and Swift index of 1000. The simple equation is... 

Operation and Service Manuais. To be of real value to the mechanic, an operation and service manual must be indexed to permit quick location of needed information. The manual must be written in simple, straightforward language, have illustrations, sketches, or exploded views adjacent to pertinent text, and have minimum references to another page or section. Major sections or chapters should be tabbed for quick location. 

The relatively simple study of fluorescence and phosphorescence (based on the action of colour centres) has nowadays extended to nonlinear optical crystals, in which the refractive index is sensitive to the light intensity or (in the photorefractive variety (Agullo-Lopez 1994) also to its spatial variation) a range of crystals, the stereotype of which is lithium niobate, is now used. 

The ratio PVC/CPVC (or reduced CPVC) is a simple but profound index of primer film structure that is perhaps the most important parameter in all of paint technology [70]. The relationship of the reduced CPVC to film structure can be appreciated by reference to Fig. 8. This figure shows a representation of a dry primer film with a range of pigment volume fraction that increases from left to right. 

Solubility of resins can be predicted in a similar way as for the solubility of polychloroprene rubbers in a solvent mixture (see Section 5.5) by means of solubility diagrams (plots of the hydrogen bonding index (y) against the solubility parameter (5). Another more simple way to determine the solubility of resins is the determination of the cloud point, the aniline and the mixed aniline points. 

The ISO philosophy for the assessment of hot environments is to use a simple, fast method of monitoring the environment, based on the wet bulb globe temperature (WBGT) index (ISO 7243). If the WBGT value exceeds the provided reference value, or if a more detailed analysis is required, then ISO 7933 provides an analytical method of assessment. 

A simplified performance index for stiffness is readily obtained from the essentials of micromechanics theory (see, for example. Chapter 3). The fundamental engineering constants for a unidirectionally reinforced lamina, ., 2, v.,2, and G.,2, are easily analyzed with simple back-of-the-envelope calculations that reveal which engineering constants are dominated by the fiber properties, which by the matrix properties, and which are not dominated by either fiber or matrix properties. Recall that the fiber-direction modulus, is fiber-dominated. Moreover, both the modulus transverse to the fibers, 2, and the shear modulus, G12. are matrix-dominated. Finally, the Poisson s ratio, v.,2, is neither fiber-dominated nor matrix-dominated. Accordingly, if for design purposes the matrix has been selected but the value of 1 is insufficient, then another more-capable fiber system is necessary. Flowever, if 2 and/or G12 are insufficient, then selection of a different fiber system will do no practical good. The actual problem is the matrix systemi The same arguments apply to variations in the relative percentages of fiber and matrix for a fixed material system. 

Is there a simple unambiguous indexing method for choosing the required procedure ... 

A third parameter to consider is the column construction. Thus the sample applicator should provide optimal sample application to give the most performance possible out of the packed bed. Constructions should also allow simple, fast, and reproducible packing of the column. Because costs for repacking of columns are a substantial operating cost item in industrial chromatography, the selection of column construction from this point of view is also important. Some novel column constructions allow very simple procedures both for laboratory and for industrial scale (e.g., INdEX columns, see Section V). 

If paraffin permeates a white opaque paper, one can read letters through the paper because the paper becomes transparent. This phenomenon is based on the simple principle that micropores in the paper are filled with paraffin, which has a refractive index that is close to that of cellulose. If the porous PVA-PVAc composite film is soaked in organic solvents having the same refractive indices as that of PVA, the porous film is expected to become transparent again, according to the same principle as the phenomenon between paraffin and cellulose. On the basis of this consideration, subsequent experi-... 

---