Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Closures INDEX

Most PET botties are produced by injection blow mol ding (71) the resin over a steel-core rod. The neck of the bottie is formed with the proper shape to receive closures and resin is provided around the temperature-conditioned rod for the blowing step. The rod with the resin is indexed to the mold, and the resin is blown away from the rod against the mold walls, where it cools to form the transparent bottie. The finished bottie is ejected and the rod is moved again to the injection-molding station. This process is favored for single cylindrical botties, but cannot be used for more complex shapes such as botties with handles. [Pg.268]

We shall meet examples later where the basis is not denumerable, but has a continuous index, say g>, where the orthogonality and closure conditions, analogs of Eqs. (8-7) and (8-13), are respectively... [Pg.434]

An appendix systematically lists references to reactions of dialkylalkoxy-malonates with amines, including not only the common aliphatic and aromatic amines, but also a very wide variety of heterocyclic amines classified according to ring system. The appendix also provides systematic references to the different ring systems obtained by ring closure of the dialkylaminomethylenemalonates. The appendix should be used in conjunction with the subject index a separate subject index is provided for this monograph volume. [Pg.461]

The synthesis principle we are using is based on the fact that molecules can diffuse into individual channels [3,4,31]. This means that, under appropriate conditions, they can also leave the zeolite by the same manner. In some cases, however, it is desirable to block their way out, so as to stabilize the structure. This can be done by adding a closure molecule after the synthesis has been completed. A variety of closure molecules which seal the channels completely or only partially can be used, depending on the requirement. An example already used is the addition of fluorenone which enters readily but leaves the structure reluctantly. If more complete sealing is needed, molecules bearing appropriate reactive groups can be used. Functionalization of the closure molecules is an option for tuning wettability, refractive index, chemical reactivity, and other properties. [Pg.334]

Wheeler, R. M. (2003). Carbon balance in bioregenerative life support systems Effects of system closure, waste management, and crop harvest index. Adv. Space Res., 3J(1), 169-175. [Pg.493]

As an alternative to the assumption of a one-time exposure for 1,000 h at the time of facility closure, permanent occupancy of a disposal site following loss of institutional control could be assumed (see Section 7.1.3.4). The assumption of chronic lifetime exposure would affect the analysis for hazardous chemicals that induce deterministic effects only if estimated intakes due to additional pathways, such as consumption of contaminated vegetables or other foodstuffs produced on the site, were significant. Based on the results for lead in Table 7.8, an intake rate from additional pathways of about 50 percent of the assumed intake rate by soil ingestion, inhalation, and dermal absorption would be sufficient to increase the deterministic risk index above unity. The importance of additional pathways was not investigated in this analysis, but they clearly would warrant consideration. The increase in exposure time during permanent occupancy does not otherwise affect the analysis for chemicals that induce deterministic effects, provided RfDs are appropriate for chronic exposure, because chronic RfDs incorporate an assumption that the levels of contaminants in body organs relative to the intake rate (dose) are at steady state. [Pg.345]

Toxicological evaluation of identified and unidentified impurities from a container can help improve the safety index of drug products. The toxicological evaluation should take into consideration container closure system properties, drug product formulation, dosage form, route of administration, and dose regimen. A close correlation between chemical and toxicological information can provide better control on safety and compatibility of containers and closures. [Pg.176]

Go to the National Traffic and Road Closure Information Web site at http //www.fhwa.dot.gov/ trafficinfo/index.htm. In the event of a natural disaster involving severe weather conditions, locate updated information on the status of roads in your state and locality. What other Web sites could you go to for current weather-related road conditions during a disaster What aspects of a disaster plan would this information change ... [Pg.18]

Whitson JT, Love R, Brown RH, et al. The effect of reduced eyedrop size and eyeUd closure on the therapeutic index of phenylephrine.AmJ Ophthalmol 1993 115 357-359. [Pg.52]

The Hosoya Z index depends on the molecular size as well as on branching and ring closure. It was also found to correlate well with the boiling point. [Pg.215]

Using the closure relationships Exj. (G.19) and (G.20) for separations below and above the hard core, we can now calculate the new direct correlation functions (r). We stress that the closure can be solved independentlj- for each index combination a/ . Furthermore, note that the HNC closure (r > a p) involves the total correlation functions (f), which can bo approximated by the current estimates (r) -... [Pg.488]


See other pages where Closures INDEX is mentioned: [Pg.192]    [Pg.302]    [Pg.163]    [Pg.623]    [Pg.290]    [Pg.808]    [Pg.153]    [Pg.156]    [Pg.647]    [Pg.145]    [Pg.127]    [Pg.144]    [Pg.258]    [Pg.284]    [Pg.331]    [Pg.333]    [Pg.145]    [Pg.106]    [Pg.73]    [Pg.328]    [Pg.160]    [Pg.330]    [Pg.74]    [Pg.184]    [Pg.196]    [Pg.196]    [Pg.2671]    [Pg.281]    [Pg.59]    [Pg.213]    [Pg.1726]    [Pg.300]    [Pg.184]    [Pg.445]    [Pg.159]    [Pg.218]   
See also in sourсe #XX -- [ Pg.138 ]




SEARCH



INDEX closure relations

© 2024 chempedia.info