Impressed current equipment connections

The units and ancillary equipment must be protected from mechanical damage and the effects of weather to ensure the reliable operation of an impressed current station. This is achieved by installing it in a weatherproof plastic housing (see Fig. 8-2). Sufficient ventilation must be provided to disperse heat. The ventilation holes should be protected with brass gauze to keep out animals. Transformer-rectifier units must be connected to a circuit that is continuously energized, especially if they are in a building where the current is turned off at night, e.g., gas stations that are not open for 24 h. 

As an example. Fig. 20-7 shows potential and protection currents of two parallel-connected 750-liter tanks as a function of service life. The protection equipment consists of a potential-controlled protection current rectifier, a 0.4-m long impressed current anode built into the manhole cover, and an Ag-AgCl electrode built into the same manhole [10,11]. A second reference electrode serves to control the tank potential this is attached separately to the opposite wall of the tank. During the whole of the control period, cathodic protection is ensured on the basis of the potential measurement. The sharp decrease in protection current in the first few months is due to the formation of calcareous deposits. 

---