Imidates acylation

Amino-5 -deoxy-2, 3 -0-isopropylideneadenosine was acylated at N-5 with an activated derivative of the 6-carboxy-2-naphthyl ester of Kemp s acid imide. The resulting molecule possesses self-complementary binding sites, the key feature of replicating molecules that act as templates for their own reproduction. The dimer of this molecule is, however, not very stable K = 630 L mol ). When the two initially mentioned educts are added, a small proportion of the ternary complex is also formed and undergoes a fast, template-catalysed... 

Compounds that have two acyl groups bonded to a single nitrogen are known as imides The most common imides are cyclic ones... 

Section 20 16 Imides are compounds that have two acyl groups attached to nitrogen... 

The product of this reaction is an imide (Section 20 16) a diacyl derivative of an amine Either aqueous acid or aqueous base can be used to hydrolyze its two amide bonds and liberate the desired primary amine A more effective method of cleaving the two amide bonds is by acyl transfer to hydrazine... 

AijAT-dicyclohexylcarhodiimide (DCC) also leads to essentially quantitative conversion of amic acids to isoimides, rather than imides (30,31). Combinations of trifluoroacetic anhydride—triethjlarnine and ethyl chi oroform a te—triethyl amine also result in high yields of isoimides (30). A kinetic study on model compounds has revealed that isoimides and imides are formed via a mixed anhydride intermediate (12) that is formed by the acylation of the carboxylic group of amic acid (8). 

Other substitution reactions have been described with ketones, epoxides, anhydrides, acyl haUdes, amides, and imidates, among others (4). 

The predominance of structure 65 (R = H) in the equilibrium 65 66 has been reported on the basis of the ultraviolet spectral similarity of the potentially tautomeric compound and of 67. However, when R = COCH3, this hydroxy pyridine 1-imide reacts with diazomethane to yield 68, which has been interpreted to indicate that 66 is the predominant tautomer this conclusion is supported by the resultant changes in the pif values when the acetyl group is replaced by other acyl groups. 

Acylation of l,2,4-triazolo[l,5-c]quiiiazoliii-5-oiie (141) with ethyl chlo-roformate occurred at N6 to afford the 6-ethoxycarboiiyl derivative 142 (75CB3799) (Scheme 55). Tliis result indicates that the amide tautomer (lactam tautomer) 141 prevailed over the corresponding imidic acid tautomer (lactim tautomer). 

Acylation of mesoionic pyrido[l,2-u]pyrimidin-4-ones 150 with aroyl chlorides in the presence of NEts yielded 2-aroyloxy-4//-pyrido[l,2-u]pyrimidin-4-ones 178 (96JHC663). None of the esters 178 could be rearranged to the 2-hydroxy-3-aroyl derivatives 179. The hydroxy group of 9-hydroxy-2-methyl-3- 2-[4-(6-fluoro-l,2-benzisoxazol-3-yl)-l-piperidinyl] ethyl -6,7,8,9-tetrahydro-4//-pyrido[l, 2-u]pyrimidin-4-one was acylated with hexadecanoic acid in CH2CI2 in the presence of dicyclohexylcarbodi-imide and 4-pyrrolidinopyridine at room temperature for 3 days in 80% yield (97MIP7). 

For less hindered carboxylic acids acylation of the imidate requires only 5 minutes. With this modification the /V-(a-methoxybenzyl)amides are prepared according to the above-mentioned procedure [R = CH3, CH(CH,)2. CH(CH, )OAc, CH(C H2)OAc yield 85-88%]. 

Sulfur-stabilized ylides underwent photodriven reaction with chromium alkoxy-carbenes to produce 2-acyl vinyl ethers as E/Z mixtures with the E isomer predominating (Table 22) [ 121-123]. The reaction is thought to proceed by nucleophilic attack of the ylide carbon at the chromium carbene carbon followed by elimination of (CO)5CrSMe2. The same reaction occurred thermally, but at a reduced rate. Sulfilimines underwent a similar addition/elimination process to produce imidates or their hydrolysis products (Table 23) [ 124,125]. Again the reaction also proceeded thermally but much more slowly. Less basic sulfilimines having acyl or sulfonyl groups on nitrogen failed to react. 

Imides can be prepared by the attack of amides or their salts on acyl halides, anhydrides, and carboxylic acids or esters. The best synthetic method for the preparation of acyclic imides is the reaction between an amide and an anhydride at 100°C catalyzed by H2S04. When acyl chlorides are treated with amides in a2 l molar ratio at low temperatures in the presence of pyridine, the products are N,N-diacylamides, (RCO)3N. ... 

In 12 the upper face is shielded by the isopropyl group, whereas in 13 the lower face is shielded by the methyl and phenyl groups. As a result, alkylation of the two derivatives gives products of the opposite configuration. The initial alkylation product ratios are typically 95 5 in favor of the major isomer. Since these products are diastereomeric mixtures, they can be separated and purified. Subsequent hydrolysis or alcoholysis provides acids or esters in enantiomerically enriched form. Alternatively, the acyl imides can be reduced to alcohols or aldehydes. The final products can often be obtained in greater than 99% enantiomeric purity. 

A chiral aluminum-salen catalyst gives good enantioselectivity in the addition of cyanide (from TMS-CN) to unsaturated acyl imides.338... 

In a related study by the same authors, the effect of microwave irradiation on car-bodiimide-mediated esterifications on a solid support was investigated, employing benzoic acid [29]. The carboxylic acid was activated using N,N -diisopropylcarbodi-imide (DIC) through the O-acyl isourea or the symmetrical anhydride protocol (Scheme 7.9). The isourea protocol was carried out in a dichloromethane/N,N-di-methylformamide mixture in sealed vessels, whereas the anhydride reactions were carried out in l-methyl-2-pyrrolidinone (NMP) at atmospheric pressure. 

Similarly, a solid-supported imide has been reported to serve as an acylating reagent under microwave conditions by Nicewonger and coworkers [130], The starting imide was immobilized on aminomethyl polystyrene and in this case benzoyl chloride was chosen to prepare the acylating reagent (Scheme 7.111). Primary amines and piperazines were smoothly acylated at room temperature, but more hindered secondary amines required more time and higher temperatures, and anilines... 

Reagent control This involves the addition of a chiral enolate or allyl metal reagent to an achiral aldehyde. Chiral enolates are most commonly formed through the incorporation of chiral auxiliaries in the form of esters, acyl amides (oxazolines), imides (oxazolidinones) or boron enolates. Chiral allyl metal reagents are also typically joined with chiral ligands. 

Thus, the best compromises for Boc and Fmoc chemistries seem to be cyclohexyl and 2,4-dimethylpent-3-yl (Dmpn), which is of intermediate stability, and the removal of which by trifluoromethanesulfonic acid with the aid of thioanisole (see Section 6.22) leads to minimal imide formation (see Section 6.13). Points to note are that acidolysis of esters by hydrogen fluoride can lead to fission at the oxy-car-bonyl bond instead of the alkyl-oxy bond, thus generating acylium ions that can react with nucleophiles (see Sections 6.16 and 6.22), and that benzyl esters may undergo transesterification if left in methanol. The side reactions of cyclization (see Section 6.16) and acylation of anisole (see Section 6.22) caused by acylium ion formation do not occur at the side chain of aspartic acid.47-51... 

---