Image Pro Plus

Figure 8. Relative size distribution for the MPIF Na /Pd catalyst particles before (left, 35 particles) and after catalytic tests (right, 75 particles, magnetic stirring). Arithmetic average diameters 319 and 276mm were determined for particles before and after catalytic tests, respectively. Image Pro Plus program. (Reprinted from Ref [29], 2003, with permission from Elsevier.)...

Compute the mean gray scale value of all pixels in the AOI using the Image Histogram function in Image-Pro Plus software. 

Image Pro Plus Software features automated microscope control, advanced fluorescence acquisition, image deconvolution, and three-dimensional reconstruction and measurement. www.mediacy.com... 

C) same image of (A) was converted into binary image with histogram analysis of Image-Pro Plus software. ... 

This procedures is carried out on several (at least 10) digitalized TEM images taken at the same magnification taken in different zones of the sample. It involves the use of image analysis software (e.g. Image Pro Plus, Media Cybernetics) and the following steps ... 

Figure 23.6. CRYO-SEM image analysis, a) SEM image of a cross-section of the MEA2 imder frozen state, b) a close-up of a sublayer in a), and c) the same image of a) converted into a binary image with histogram analysis using Image-Pro Plus software.

The swelling characteristics of fibrous the dressings are determined by using Labophot-2 optical microscope at a magnification of 40x. Image-Pro Plus is used to obtain images of the fibres, and the diameters were determined. The solution... 

Ten scanning views were chosen randomly under enlargement at lOOOx for quantitative determination. The image analysis software Image Pro-Plus 4.5 was used to obtain the distribution and spherulite size, taken as the maximum length inside the spherulite. Percentage of porosity was also determined from the microstructural images. 

In this table, experiments of No. 1 to 7 are for the single factor experiments and the orthogonal experiments eover No. 3, 5, 7 and No. 8 to 13. The image analysis method was employed to measure the fiber diameter. The images of nonwoven samples were acquired by the QUESTER three-dimensional video frequency microscope and then processed by the image analysis software named Image-Pro Plus to measure the fiber diameter. Further details about the experiment can be found in reference [3],... 

The biocompatibility property of HAp and HAp-PEEK nano composite pallets was carried out with in vitro study using freshly prepared SBF at temperature of 25-40°C and pH of 6.5-1.1. The growth study of SBF crystal was carried out in OM (Zeiss Axiolab Ltd. make, USA, model Image-Pro Plus V4.1) and XRD (Seifert Diffractometer make, England, model ISO Debyeflex-2002) using CuKa radiation (L = 1.54056 A). The crystallinity and compositional studies were carried out with XRD technique. 

The images captured with the high-speed CCD camera were analyzed using Image Pro-plus software. The cell density was calculated by counting the number of cells observed from the images taken at a given moment in time ... 

---