Hydrophilic association

The two-component waterborne urethanes are similar in nature to the one-component waterborne urethanes. In fact, many one-component PUD s may benefit from the addition of a crosslinker. The two-component urethanes may have higher levels of carboxylic acid salt stabilizer built into the backbone than is actually needed to stabilize the urethane in water. As a result, if these two-component urethane dispersions were to be used as one-component adhesives by themselves (without crosslinker), they would show very poor moisture resistance. When these two-component urethane dispersions are used in conjunction with the crosslinkers listed in Fig. 8, the crosslinkers will react with the carboxylic pendant groups built into the urethane, as previously shown in the one-component waterborne urethane section. This accomplishes two tasks at the same time (1) when the crosslinker reacts with the carboxylic acid salt, it eliminates much of the hydrophilicity associated with urethane dispersion, and (2) it crosslinks the dispersion, which imparts solvent and moisture resistance to the urethane adhesive (see phase V in Fig. 5). As a result of crosslinking, the physical properties may be modified. For example, the results may be an increase in tensile properties and a decrease in elongation. Depending upon the level of crosslinking, the dispersion may lose the ability to be repositionable. (Many of the one-component PUD s may... 

Computer-graphics examination [37] of the X-ray structure of pristinamycin IIa [85] showed that the molecule is compact the macrocycle is folded and induces the formation of a weak hydrogen bond between 8-NH and 38-0 (2.6 A) (Fig. 9). The arrangement of the three oxygen atoms 34-0, 35-0 and 36-0 (Fig. 8) results in an area of hydrophilicity associated with one side of the molecule whilst the methyl groups, the double bonds and the oxazole nucleus (Fig. 9) render the opposite side of the molecule lipophilic. 

Bohmer, M. R., Koopal, L. K., and Janssen, R. 1992. Adsorption of Nonionic Snrfactants on Hydrophilic Association in the Adsorbed Layer Surfaces. An Experimental and Theoretical Study on association in the adsorbed layer. Langmuir 8 2228. 

Carboxylate groups are hydrophilic ( water loving ) and tend to confer water sol ubility on species that contain them Long hydrocarbon chains are lipophilic ( fat loving ) and tend to associate with other hydrocarbon chains Sodium stearate is an example of an amphiphilic substance both hydrophilic and lipophilic groups occur within the same molecule... 

The structure of cholic acid helps us understand how bile salts such as sodium tauro cholate promote the transport of lipids through a water rich environment The bot tom face of the molecule bears all of the polar groups and the top face is exclusively hydrocarbon like Bile salts emulsify fats by forming micelles m which the fats are on the inside and the bile salts are on the outside The hydrophobic face of the bile salt associates with the fat that is inside the micelle the hydrophilic face is m contact with water on the outside... 

These are molecules which contain both hydrophilic and hydrophobic units (usually one or several hydrocarbon chains), such that they love and hate water at the same time. Familiar examples are lipids and alcohols. The effect of amphiphiles on interfaces between water and nonpolar phases can be quite dramatic. For example, tiny additions of good amphiphiles reduce the interfacial tension by several orders of magnitude. Amphiphiles are thus very efficient in promoting the dispersion of organic fluids in water and vice versa. Added in larger amounts, they associate into a variety of structures, filhng the material with internal interfaces which shield the oil molecules—or in the absence of oil the hydrophobic parts of the amphiphiles—from the water [3]. Some of the possible structures are depicted in Fig. 1. A very rich phase... 

Current ongoing research at Jordi Associates is investigating new ways of bonding hydrophillic groups directly to the aromatic centers of PDVB gels, again in the hope of minimizing adsorptive effects. 

Hurst (19) discusses the similarity in action of the pyrethrins and of DDT as indicated by a dispersant action on the lipids of insect cuticle and internal tissue. He has developed an elaborate theory of contact insecticidal action but provides no experimental data. Hurst believes that the susceptibility to insecticides depends partially on the cuticular permeability, but more fundamentally on the effects on internal tissue receptors which control oxidative metabolism or oxidative enzyme systems. The access of pyrethrins to insects, for example, is facilitated by adsorption and storage in the lipophilic layers of the epicuticle. The epicuticle is to be regarded as a lipoprotein mosaic consisting of alternating patches of lipid and protein receptors which are sites of oxidase activity. Such a condition exists in both the hydrophilic type of cuticle found in larvae of Calliphora and Phormia and in the waxy cuticle of Tenebrio larvae. Hurst explains pyrethrinization as a preliminary narcosis or knockdown phase in which oxidase action is blocked by adsorption of the insecticide on the lipoprotein tissue components, followed by death when further dispersant action of the insecticide results in an irreversible increase in the phenoloxidase activity as a result of the displacement of protective lipids. This increase in phenoloxidase activity is accompanied by the accumulation of toxic quinoid metabolites in the blood and tissues—for example, O-quinones which would block substrate access to normal enzyme systems. The varying degrees of susceptibility shown by different insect species to an insecticide may be explainable not only in terms of differences in cuticle make-up but also as internal factors associated with the stability of oxidase systems. 

The curves of Fig. 6, relative to the TGDDM-DDS systems cured with 50 PHR of hardener, have been drawn using the same procedures, although, according to the discussion of the previous section, a low activity term associated with the adsorption on the hydrophilic sites, has also been considered. 

Almost all urethane materials are synthesized without the use of solvents or water as diluents or earners and are referred to as being 100% solids. This is true of all foams and elastomers. There are many products, however, which do utilize solvents or water, and these are known as solvent-borne and waterborne systems, respectively. In the past, many coatings, adhesives, and binders were formulated using a solvent to reduce viscosity and/or ease application. However, the use of volatile solvents has been dramatically curtailed in favor of more environmentally friendly water (see Section 4.1.3), and now there are many aqueous coatings, adhesives, and associated raw materials. Hydrophilic raw materials capable of being dispersed in water are called water reducible (or water dispersible), meaning they are sufficiently hydrophilic so as to be readily emulsified in water to form stable colloidal dispersions. 

---