Hydrogen fluoride reaction

These studies on hydrogen fluoride reactions were continued, and another important result was the proof of differences in stability among acyloxonium... 

Introduction of the fluorine can be done by chloride-fluoride exchange (Reaction scheme 210) or according to the Balz-Schiemann decomposition of diazonium tetrafluoroborate 292 or triazene 293 in liquid hydrogen fluoride (Reaction scheme 210). 

Silicon tetrafluoride is a colourless gas, b.p. 203 K, the molecule having, like the tetrahalides of carbon, a tetrahedral covalent structure. It reacts with water to form hydrated silica (silica gel, see p. 186) and hexafluorosilicic acid, the latter product being obtained by a reaction between the hydrogen fluoride produced and excess silicon tetrafluoride ... 

This reaction can be reversed by heating and is a convenient method of obtaining anhydrous hydrogen fluoride from an aqueous solution. 

The bond dissociation energy of the hydrogen-fluorine bond in HF is so great that the above equilibrium lies to the left and hydrogen fluoride is a weak acid in dilute aqueous solution. In more concentrated solution, however, a second equilibrium reaction becomes important with the fluoride ion forming the complex ion HFJ. The relevant equilibria are ... 

Hydrogen fluoride is the most important compound of fluorine. It is prepared in the laboratory, and on the large scale, by the reaction of calcium fluoride with concentrated sulphuric acid. ... 

The reaction is carried out in a lead retort one suitable for the laboratory can be made from a piece of lead piping, bent like a retort and closed at the shorter end. This is charged with fluorspar and the acid and heated, and the hydrogen fluoride is distilled into a polythene vessel. 

Hydrogen fluoride also effects replacement reactions in organic compounds. For example, carbon tetrachloride yields a mixture of chlorofluoromethanes CCI3F, CCI2F2 and so on. Like all the other hydrogen halides, hydrogen fluoride adds on to olefins, for example ... 

Other catalysts which may be used in the Friedel - Crafts alkylation reaction include ferric chloride, antimony pentachloride, zirconium tetrachloride, boron trifluoride, zinc chloride and hydrogen fluoride but these are generally not so effective in academic laboratories. The alkylating agents include alkyl halides, alcohols and olefines. 

Consider the reaction of sodium hydroxide with hydrogen fluoride in aqueous solution... 

The order of reactivity of the hydrogen halides parallels their acidity HI > HBr > HCl >> HF Hydrogen iodide is used infrequently however and the reaction of alco hols with hydrogen fluoride is not a useful method for the preparation of alkyl fluorides Among the various classes of alcohols tertiary alcohols are observed to be the most reactive and primary alcohols the least reactive... 

Production of hydrogen fluoride from reaction of Cap2 with sulfuric acid is the largest user of fluorspar and accounts for approximately 60—65% of total U.S. consumption. The principal uses of hydrogen fluoride are ia the manufacture of aluminum fluoride and synthetic cryoHte for the Hall aluminum process and fluoropolymers and chlorofluorocarbons that are used as refrigerants, solvents, aerosols (qv), and ia plastics. Because of the concern that chlorofluorocarbons cause upper atmosphere ozone depletion, these compounds are being replaced by hydrochlorofluorocarbons and hydrofluorocarbons. 

Manufacture. Anhydrous ammonium bifluoride containing 0.1% H2O and 93% NH4HF2 can be made by dehydrating ammonium fluoride solutions and by thermally decomposing the dry crystals (7). Commercial ammonium bifluoride, which usually contains 1% NH F, is made by gas-phase reaction of one mole of anhydrous ammonia and two moles of anhydrous hydrogen fluoride (8) the melt that forms is flaked on a cooled dmm. The cost of the material in 1992 was 1.48/kg. 

Barium fluoride [7782-32-8] Bap2, is a white crystal or powder. Under the microscope crystals may be clear and colorless. Reported melting points vary from 1290 (1) to 1355°C (2), including values of 1301 (3) and 1353°C (4). Differences may result from impurities, reaction with containers, or inaccurate temperature measurements. The heat of fusion is 28 kj/mol (6.8 kcal/mol) (5), the boiling point 2260°C (6), and the density 4.9 g/cm. The solubiUty in water is about 1.6 g/L at 25°C and 5.6 g/100 g (7) in anhydrous hydrogen fluoride. Several preparations for barium fluoride have been reported (8—10). 

Raw Materials. Essentially all hydrogen fluoride manufactured worldwide is made from fluorspar and sulfuric acid, according to the reaction ... 

Hydrogen fluoride is not a carcinogen. However, HE is highly reactive, and heat or toxic fumes may be evolved. Reaction with certain metals may generate flammable and potentially explosive hydrogen (qv) gas. 

Fep2 was first prepared by the action of gaseous hydrogen fluoride over FeCl2 ia an iron boat (2). The reaction of anhydrous FeCl2, FeCl2 4H20, or FeSO and anhydrous HF in plastic reaction vessels such as vessels of polyethylene, polypropylene, or Teflon results in quantitative yields of very... 

Properties. Lithium fluoride [7789-24-4] LiF, is a white nonhygroscopic crystaUine material that does not form a hydrate. The properties of lithium fluoride are similar to the aLkaline-earth fluorides. The solubility in water is quite low and chemical reactivity is low, similar to that of calcium fluoride and magnesium fluoride. Several chemical and physical properties of lithium fluoride are listed in Table 1. At high temperatures, lithium fluoride hydroly2es to hydrogen fluoride when heated in the presence of moisture. A bifluoride [12159-92-17, LiF HF, which forms on reaction of LiF with hydrofluoric acid, is unstable to loss of HF in the solid form. 

---