Hydrocarbon molecules styrene

Aqueous mineral acids react with BF to yield the hydrates of BF or the hydroxyfluoroboric acids, fluoroboric acid, or boric acid. Solution in aqueous alkali gives the soluble salts of the hydroxyfluoroboric acids, fluoroboric acids, or boric acid. Boron trifluoride, slightly soluble in many organic solvents including saturated hydrocarbons (qv), halogenated hydrocarbons, and aromatic compounds, easily polymerizes unsaturated compounds such as butylenes (qv), styrene (qv), or vinyl esters, as well as easily cleaved cycHc molecules such as tetrahydrofuran (see Furan derivatives). Other molecules containing electron-donating atoms such as O, S, N, P, etc, eg, alcohols, acids, amines, phosphines, and ethers, may dissolve BF to produce soluble adducts. 

Some of the most difficult heterophase systems to characterize are those based on hydrocarbon polymers such as mbber-toughened polypropylene or other blends of mbbers and polyolefins. Eecause of its selectivity, RuO staining has been found to be usehil in these cases (221,222,230). Also, OsO staining of the amorphous blend components has been reported after sorption of double-bond-containing molecules such as 1,7-octadiene (231) or styrene (232). In these cases, the solvent is preferentially sorbed into the amorphous phase, and the reaction with OsO renders contrast between the phases. 

The L-B films offer some advantages over aqueous-hydrocarbon interfaces of micelles and the related assemblies discussed above in terms of the magnitude of their orienting ability and the ease of interpretation of selectivity in photoreactions conducted in them. Molecules in the films have very little freedom of motion (stiff reaction cavities), their interfaces are very well defined, and therefore the alignment of reactant molecules can be readily expressed in the products. Photodimerization of stilbazole derivatives 62, N-octadecyl-l-(4-pyridyl)-4-(phenyl)-l,3-butadiene, (63), surfactant styrene derivatives 64 and 65, and cinnamic acids have been carried out in L-B films [18, 196-200], In all cases, single isomeric head-head dimers are obtained. Geometric isomerization of olefins has not been observed in competition with photodimerization. Independent of the location of the chromophore (i.e.,... 

The charged end of a polymer and its counter-ion may recombine and form a stable covalent bond thus terminating the propagation of polymerization. Such a termination is frequently observed in carbonium ion polymerizations. For example, polymerization of a vinyl monomer if initiated by hydrochloric acid produces a carbonium ion and a chlorine-counter-ion. These two ions recombine readily forming a stable covalent C-Cl bond which does not propagate further the polymerization and forms, therefore, the dead end of a polymeric molecule. Actually, the recombination of carbonium ion with Cl- ion is such a rapid reaction that usually it follows immediately the formation of the relevant carbonium ion. This prevents the formation of a polymeric molecule and gives instead an addition product of HC1 to the reactive C=C double bond. A polymeric product can be obtained if the ions recombination is slowed down by sufficiently powerful solvation. For example, a solution of styrene in nitromethane, but not in a hydrocarbon, can be polymerized by HC1 (2), since the recombination of the solvated ions is sufficiently slow to permit the formation of a polymer. 

As shown in Figure 1.2, the solvent strength of supercritical carbon dioxide approaches that of hydrocarbons or halocarbons. As a solvent, C02 is often compared to fluorinated solvents. In general, most nonpolar molecules are soluble in C02, while most polar compounds and polymers are insoluble (Hyatt, 1984). High vapor pressure fluids (e.g., acetone, methanol, ethers), many vinyl monomers (e.g., acrylates, styrenics, and olefins), free-radical initiators (e.g., azo- and peroxy-based initiators), and fluorocarbons are soluble in liquid and supercritical C02. Water and highly ionic compounds, however, are fairly insoluble in C02 (King et al., 1992 Lowry and Erickson, 1927). Only two classes of polymers, siloxane-based polymers and amorphous fluoropolymers, are soluble in C02 at relatively mild conditions (T < 100 °C and P < 350 bar) (DeSimone et al., 1992, 1994 McHugh and Krukonis, 1994). 

The BP process [7] is based on a sand fluidized-bed pyrolysis reactor. The cracking temperature is kept at 400-600°C. Low-molecular hydrocarbons can be obtained. The process mainly involves converting waste plastics into normal linear hydrocarbons, the average molecular weight of which is 300-500. Most plastics can be treated by this process. Polyolefins are decomposed into small molecules with the same linear structure. PS is converted into styrene monomers and PET into mixture of hydrocarbons, carbon monoxide and carbon dioxide. A maximum of 2% PVC is allowed in this process, and the content of chlorine in the products is lower than 5 ppm. The distribution of alkene products in this process is like that in petroleum pyrolysis. The BP process was industrialized in 1997. 

These initiators produce anionic propagating species by attack on the C=C double bond of vinyl and diene monomers. A common example of this type is n-butyl lithium. The C—Li bond is not ionic in hydrocarbon media where the initiator molecules exist as aggregates. The unaggregated form is more active for initiation. Butyl lithium is usually available as a solution in hexane. Addition of tetrahydrofuran to this solvent increases the concentration of the unaggregated initiator by forming a 1 1 complex with this compound. This accelerates the rate of initiation of styrene ... 

The polyene chain further decomposes under the influence of heat, generating aromatic hydrocarbons such as benzene, styrene, naphthalene, etc. This type of reaction can be the source of some polycyclic aromatic hydrocarbons found in traces during the pyrolysis of certain vinyl polymers. The elimination of a HX molecule from a vinyl type polymer is favored by the presence of a p-double bond in a compound of the form -CH2-CHX-CH=CH-. For this reason the side reaction for vinyl polymers is slower for the intact polymer and accelerates as the polymer tends to decompose. 

As seen in Table 6.4.3, the brominated molecules resulting from the brominated polystyrene represent more than 96% of the pyrolysis products. However, a small proportion of hydrocarbons characteristic for poly(styrene) pyrolysis are present. These... 

Many other ion-molecule reactions involving highly unsaturated hydrocarbon ions and neutral olefins or the equivalent strained cycloalkanes have been studied by mass spectrometry . For example, we may mention here the addition of ionized cyclopropane and cyclobutane to benzene radical cations giving the respective n-alkylbenzene ions but also isomeric cyclodiene ions such as ionized 8,9-dihydroindane and 9,10-dihydrotetralin, respectively. Extensive studies have been performed on the dimerization product of charged and neutral styrene. ... 

From acyclic hydrocarbons 673.5, Six or more C Atoms in Molecule 669, Vinyl, styrenes... 

---