Hindered amine light stabilizer absorption

The exterior durabiHty of relatively stable coatings can be enhanced by use of additives. Ultraviolet absorbers reduce the absorption of uv by the resins and hence decrease the rate of photodegradation. Eurther improvements can be gained by also adding free-radical trap antioxidants (qv) such as hindered phenols and especially hindered amine light stabilizers (HALS). A discussion of various types of additives is available (113). 

UV absorbers have been found to be quite effective for stabilization of polymers and are very much in demand. They function by the absorption and harmless dissipation of the sunlight or UV-rich artificial radiation, which would have otherwise initiated degradation of a polymer material. Meyer and Geurhart reported, for the first time in 1945 [10], the use of UV absorber in a polymer. They found that the outdoor life of cellulose acetate film was greatly prolonged by adding phenyl salicylate (salol) [10]. After that, resorcinol monobenzoate, a much more effective absorber, was introduced in 1951 [11] for stabilization of PP, but salol continued to be the only important commercial stabilizer for several years. The 2,4-dihydroxybenzophenone was marketed in 1953, followed shortly by 2-hydroxy-4-methoxybenzophenone and other derivatives. Of the more commonly known UV absorbers, the 2-hydroxybenzophenones, 2-hy-droxy-phenyl-triazines, derivatives of phenol salicylates, its metal chelates, and hindered amine light stabilizers (HALS) are widely used in the polymer industry. 

A number of antioxidants were examined for solubility in the monomer, effect upon the photoinitiator, UV stability, effect upon physical properties of the cured coating and their effectiveness as stabilizers. The addition of hydrogen donors, HD-2 or HD-3, or a hindered amine light stabilizer, HALS-1, improves the stability of a cured epoxy acrylate system with a minimal change in the physical properties of the resin. DSC and oxygen absorption measurements show that the secondary hindered amine, HALS-1, imparts the best stability to the resin. 

As alluded to above, a second class of light stabilizers, the hindered amine light stabilizers (HALSs), provide additional stability to polymers and can function even in thin film or in sample surfaces. The chemistry of HALSs is based on the 2,2,6,6-tetramethylpiperidine derivatives (Fig. 5). Unlike UVAs, HALSs have no significant UV absorption and... 

Sterically hindered amine light stabilizers (HALS) constitute another class of light stabilizers that efficiently reduce UV-induced degradation. They are compounds that intercept chemically highly reactive radicals formed hy photochemical reactions and transform them into harmless reaction products. Fig. 3.8. Their effectiveness is not based on a competing physical absorption effect, therefore no minimum layer thickness is required for HALS effectiveness, unlike for the UV absorbers. That makes them suitable for applications such as films and fibers (527). In particular, they provide surface protection, which plays a special role in visible automotive parts. Another essential difference to UV absorbers is the fact that photooxidation is not prevented, but after initial damage its propagation is either reduced or suppressed [510],... 

---